Files
openairinterface5g/openair2/RRC/LTE/L2_interface_common.c
T
Robert Schmidt 6ae4ec37ca Remove most doxygen file-level commands, copyrights, and authors
Remove the \file directive, as it is always superfluous  because the
current file is implicit [1]:

> If the file name is omitted (i.e. the line after \file is left blank)
> then the documentation block that contains the \file command will belong
> to the file it is located in.

Author names and e-mails are not relevant for us: it can always be
inferred from git blame, and is often outdated.

Eurecom code has been contributed and was under OAI PL v1.0/v1.1.

For the cpack package contact: put generic email address that is
independent of an individual and that will remain reachable.

[1] https://www.doxygen.nl/manual/commands.html#cmdfile
2026-03-27 14:52:47 +01:00

125 lines
5.3 KiB
C

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*!
* \brief layer 2 interface, used to support different RRC sublayer
*/
#include "common/platform_types.h"
#include "rrc_defs.h"
#include "rrc_extern.h"
#include "common/utils/LOG/log.h"
#include "rrc_eNB_UE_context.h"
#include "pdcp.h"
#include "common/ran_context.h"
#include "intertask_interface.h"
//#define RRC_DATA_REQ_DEBUG
//#define DEBUG_RRC 1
extern RAN_CONTEXT_t RC;
//------------------------------------------------------------------------------
uint8_t
rrc_data_req(
const protocol_ctxt_t *const ctxt_pP,
const rb_id_t rb_idP,
const mui_t muiP,
const confirm_t confirmP,
const sdu_size_t sdu_sizeP,
uint8_t *const buffer_pP,
const pdcp_transmission_mode_t modeP
)
//------------------------------------------------------------------------------
{
if(sdu_sizeP == 255) {
LOG_I(RRC,"sdu_sizeP == 255");
return false;
}
MessageDef *message_p;
// Uses a new buffer to avoid issue with PDCP buffer content that could be changed by PDCP (asynchronous message handling).
uint8_t *message_buffer;
message_buffer = itti_malloc (
ctxt_pP->enb_flag ? TASK_RRC_ENB : TASK_RRC_UE,
ctxt_pP->enb_flag ? TASK_PDCP_ENB : TASK_PDCP_UE,
sdu_sizeP);
memcpy (message_buffer, buffer_pP, sdu_sizeP);
message_p = itti_alloc_new_message (ctxt_pP->enb_flag ? TASK_RRC_ENB : TASK_RRC_UE, 0, RRC_DCCH_DATA_REQ);
RRC_DCCH_DATA_REQ (message_p).frame = ctxt_pP->frame;
RRC_DCCH_DATA_REQ (message_p).enb_flag = ctxt_pP->enb_flag;
RRC_DCCH_DATA_REQ (message_p).rb_id = rb_idP;
RRC_DCCH_DATA_REQ (message_p).muip = muiP;
RRC_DCCH_DATA_REQ (message_p).confirmp = confirmP;
RRC_DCCH_DATA_REQ (message_p).sdu_size = sdu_sizeP;
RRC_DCCH_DATA_REQ (message_p).sdu_p = message_buffer;
//memcpy (RRC_DCCH_DATA_REQ (message_p).sdu_p, buffer_pP, sdu_sizeP);
RRC_DCCH_DATA_REQ (message_p).mode = modeP;
RRC_DCCH_DATA_REQ (message_p).module_id = ctxt_pP->module_id;
RRC_DCCH_DATA_REQ(message_p).rnti = ctxt_pP->rntiMaybeUEid;
RRC_DCCH_DATA_REQ (message_p).eNB_index = ctxt_pP->eNB_index;
itti_send_msg_to_task (
ctxt_pP->enb_flag ? TASK_PDCP_ENB : TASK_PDCP_UE,
ctxt_pP->instance,
message_p);
LOG_I(RRC,"sent RRC_DCCH_DATA_REQ to TASK_PDCP_ENB\n");
return true; // TODO should be changed to a CNF message later, currently RRC lite does not used the returned value anyway.
}
//------------------------------------------------------------------------------
void
rrc_data_ind(
const protocol_ctxt_t *const ctxt_pP,
const rb_id_t Srb_id,
const sdu_size_t sdu_sizeP,
const uint8_t *const buffer_pP
)
//------------------------------------------------------------------------------
{
rb_id_t DCCH_index = Srb_id;
if (ctxt_pP->enb_flag == ENB_FLAG_NO) {
LOG_I(RRC, "[UE %x] Frame %d: received a DCCH %ld message on SRB %ld with Size %d from eNB %d\n",
ctxt_pP->module_id, ctxt_pP->frame, DCCH_index,Srb_id,sdu_sizeP, ctxt_pP->eNB_index);
} else {
LOG_D(RRC, "[eNB %d] Frame %d: received a DCCH %ld message on SRB %ld with Size %d from UE %lx\n", ctxt_pP->module_id, ctxt_pP->frame, DCCH_index, Srb_id, sdu_sizeP, ctxt_pP->rntiMaybeUEid);
}
{
MessageDef *message_p;
// Uses a new buffer to avoid issue with PDCP buffer content that could be changed by PDCP (asynchronous message handling).
uint8_t *message_buffer;
message_buffer = itti_malloc (ctxt_pP->enb_flag ? TASK_PDCP_ENB : TASK_PDCP_UE, ctxt_pP->enb_flag ? TASK_RRC_ENB : TASK_RRC_UE, sdu_sizeP);
memcpy (message_buffer, buffer_pP, sdu_sizeP);
message_p = itti_alloc_new_message (ctxt_pP->enb_flag ? TASK_PDCP_ENB : TASK_PDCP_UE, 0, RRC_DCCH_DATA_IND);
RRC_DCCH_DATA_IND (message_p).frame = ctxt_pP->frame;
RRC_DCCH_DATA_IND (message_p).dcch_index = DCCH_index;
RRC_DCCH_DATA_IND (message_p).sdu_size = sdu_sizeP;
RRC_DCCH_DATA_IND (message_p).sdu_p = message_buffer;
RRC_DCCH_DATA_IND(message_p).rnti = ctxt_pP->rntiMaybeUEid;
RRC_DCCH_DATA_IND (message_p).module_id = ctxt_pP->module_id;
RRC_DCCH_DATA_IND (message_p).eNB_index = ctxt_pP->eNB_index;
itti_send_msg_to_task (ctxt_pP->enb_flag ? TASK_RRC_ENB : TASK_RRC_UE, ctxt_pP->instance, message_p);
}
}