maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
6d760fe41dcefb2baf17a567c34e5daabb07c60c
openairinterface5g/targets/RT/USER/nr-uesoftmodem.c
T
hongzhi wang 6d760fe41d fix nr ue pdsch
2018-11-08 16:22:52 +01:00

1245 lines
39 KiB
C
Raw Blame History

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <sched.h>
#include "T.h"
#include "rt_wrapper.h"
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
#include "assertions.h"
#include "msc.h"
#include "PHY/types.h"
#include "PHY/defs_nr_UE.h"
#include "common/ran_context.h"
#include "common/config/config_userapi.h"
#include "common/utils/load_module_shlib.h"
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
#include "../../ARCH/COMMON/common_lib.h"
#include "../../ARCH/ETHERNET/USERSPACE/LIB/if_defs.h"
//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
#include "PHY/phy_vars_nr_ue.h"
#include "PHY/LTE_TRANSPORT/transport_vars.h"
#include "SCHED/sched_common_vars.h"
#include "PHY/MODULATION/modulation_vars.h"
//#include "../../SIMU/USER/init_lte.h"
#include "LAYER2/MAC/mac.h"
#include "LAYER2/MAC/mac_vars.h"
#include "LAYER2/MAC/mac_proto.h"
#include "RRC/LTE/rrc_vars.h"
#include "PHY_INTERFACE/phy_interface_vars.h"
#ifdef SMBV
#include "PHY/TOOLS/smbv.h"
unsigned short config_frames[4] = {2,9,11,13};
#endif
#include "common/utils/LOG/log.h"
#include "common/utils/LOG/vcd_signal_dumper.h"
#include "UTIL/OPT/opt.h"
#include "enb_config.h"
//#include "PHY/TOOLS/time_meas.h"
#ifndef OPENAIR2
#include "UTIL/OTG/otg_vars.h"
#endif
#if defined(ENABLE_ITTI)
#include "intertask_interface.h"
#include "create_tasks.h"
#endif
#include "PHY/INIT/phy_init.h"
#include "system.h"
#include "stats.h"
#ifdef XFORMS
#include "PHY/TOOLS/nr_phy_scope.h"
//#include "stats.h"
// current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
// at eNB 0, an UL scope for every UE
FD_lte_phy_scope_ue *form_ue[NUMBER_OF_UE_MAX];
FD_lte_phy_scope_enb *form_enb[MAX_NUM_CCs][NUMBER_OF_UE_MAX];
FD_stats_form *form_stats=NULL,*form_stats_l2=NULL;
char title[255];
unsigned char scope_enb_num_ue = 2;
static pthread_t forms_thread; //xforms
#endif //XFORMS
#include "nr-uesoftmodem.h"
RAN_CONTEXT_t RC;
pthread_cond_t sync_cond;
pthread_mutex_t sync_mutex;
int sync_var=-1; //!< protected by mutex \ref sync_mutex.
uint16_t runtime_phy_rx[29][6]; // SISO [MCS 0-28][RBs 0-5 : 6, 15, 25, 50, 75, 100]
uint16_t runtime_phy_tx[29][6]; // SISO [MCS 0-28][RBs 0-5 : 6, 15, 25, 50, 75, 100]
#if defined(ENABLE_ITTI)
volatile int start_eNB = 0;
volatile int start_UE = 0;
#endif
volatile int oai_exit = 0;
static clock_source_t clock_source = internal;
static int wait_for_sync = 0;
unsigned int mmapped_dma=0;
int single_thread_flag=1;
int threequarter_fs=0;
uint32_t downlink_frequency[MAX_NUM_CCs][4];
int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
extern int16_t nr_dlsch_demod_shift;
//static char *conf_config_file_name = NULL;
#if defined(ENABLE_ITTI)
static char *itti_dump_file = NULL;
#endif
int UE_scan = 0;
int UE_scan_carrier = 0;
runmode_t mode = normal_txrx;
FILE *input_fd=NULL;
#if MAX_NUM_CCs == 1
rx_gain_t rx_gain_mode[MAX_NUM_CCs][4] = {{max_gain,max_gain,max_gain,max_gain}};
double tx_gain[MAX_NUM_CCs][4] = {{20,0,0,0}};
double rx_gain[MAX_NUM_CCs][4] = {{110,0,0,0}};
#else
rx_gain_t rx_gain_mode[MAX_NUM_CCs][4] = {{max_gain,max_gain,max_gain,max_gain},{max_gain,max_gain,max_gain,max_gain}};
double tx_gain[MAX_NUM_CCs][4] = {{20,0,0,0},{20,0,0,0}};
double rx_gain[MAX_NUM_CCs][4] = {{110,0,0,0},{20,0,0,0}};
#endif
double rx_gain_off = 0.0;
double sample_rate=30.72e6;
double bw = 10.0e6;
static int tx_max_power[MAX_NUM_CCs] = {0};
char rf_config_file[1024];
int chain_offset=0;
int phy_test = 0;
uint8_t usim_test = 0;
uint8_t dci_Format = 0;
uint8_t agregation_Level =0xFF;
uint8_t nb_antenna_tx = 1;
uint8_t nb_antenna_rx = 1;
char ref[128] = "internal";
char channels[128] = "0";
int codingw = 0;
int fepw = 0;
int rx_input_level_dBm;
//static int online_log_messages=0;
#ifdef XFORMS
extern int otg_enabled;
int do_forms=0;
#else
int otg_enabled;
#endif
//int number_of_cards = 1;
static NR_DL_FRAME_PARMS *frame_parms[MAX_NUM_CCs];
static nfapi_nr_config_request_t *config[MAX_NUM_CCs];
int16_t node_synch_ref[MAX_NUM_CCs];
uint32_t target_dl_mcs = 28; //maximum allowed mcs
uint32_t target_ul_mcs = 20;
uint32_t timing_advance = 0;
uint8_t exit_missed_slots=1;
uint64_t num_missed_slots=0; // counter for the number of missed slots
extern PHY_VARS_NR_UE* init_nr_ue_vars(NR_DL_FRAME_PARMS *frame_parms,
uint8_t UE_id,
uint8_t abstraction_flag);
int transmission_mode=1;
int numerology = 0;
/*
int16_t glog_level = LOG_INFO;
int16_t glog_verbosity = LOG_MED;
int16_t hw_log_level = LOG_INFO;
int16_t hw_log_verbosity = LOG_MED;
int16_t phy_log_level = LOG_INFO;
int16_t phy_log_verbosity = LOG_MED;
int16_t mac_log_level = LOG_INFO;
int16_t mac_log_verbosity = LOG_MED;
int16_t rlc_log_level = LOG_INFO;
int16_t rlc_log_verbosity = LOG_MED;
int16_t pdcp_log_level = LOG_INFO;
int16_t pdcp_log_verbosity = LOG_MED;
int16_t rrc_log_level = LOG_INFO;
int16_t rrc_log_verbosity = LOG_MED;
int16_t opt_log_level = LOG_INFO;
int16_t opt_log_verbosity = LOG_MED;
# if defined(ENABLE_USE_MME)
int16_t gtpu_log_level = LOG_DEBUG;
int16_t gtpu_log_verbosity = LOG_MED;
int16_t udp_log_level = LOG_DEBUG;
int16_t udp_log_verbosity = LOG_MED;
#endif
#if defined (ENABLE_SECURITY)
int16_t osa_log_level = LOG_INFO;
int16_t osa_log_verbosity = LOG_MED;
#endif
*/
char *rrh_UE_ip = "127.0.0.1";
int rrh_UE_port = 51000;
/* flag set by eNB conf file to specify if the radio head is local or remote (default option is local) */
//uint8_t local_remote_radio = BBU_LOCAL_RADIO_HEAD;
/* struct for ethernet specific parameters given in eNB conf file */
//eth_params_t *eth_params;
openair0_config_t openair0_cfg[MAX_CARDS];
double cpuf;
char uecap_xer[1024],uecap_xer_in=0;
int oaisim_flag=0;
int emulate_rf = 0;
threads_t threads= {-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1};
char* usrp_args=NULL;
char* usrp_clksrc=NULL;
/* forward declarations */
void set_default_frame_parms(NR_DL_FRAME_PARMS *frame_parms[MAX_NUM_CCs]);
/* see file openair2/LAYER2/MAC/main.c for why abstraction_flag is needed
* this is very hackish - find a proper solution
*/
uint8_t abstraction_flag=0;
/*---------------------BMC: timespec helpers -----------------------------*/
struct timespec min_diff_time = { .tv_sec = 0, .tv_nsec = 0 };
struct timespec max_diff_time = { .tv_sec = 0, .tv_nsec = 0 };
struct timespec clock_difftime(struct timespec start, struct timespec end) {
struct timespec temp;
if ((end.tv_nsec-start.tv_nsec)<0) {
temp.tv_sec = end.tv_sec-start.tv_sec-1;
temp.tv_nsec = 1000000000+end.tv_nsec-start.tv_nsec;
} else {
temp.tv_sec = end.tv_sec-start.tv_sec;
temp.tv_nsec = end.tv_nsec-start.tv_nsec;
}
return temp;
}
void print_difftimes(void) {
#ifdef DEBUG
printf("difftimes min = %lu ns ; max = %lu ns\n", min_diff_time.tv_nsec, max_diff_time.tv_nsec);
#else
LOG_I(HW,"difftimes min = %lu ns ; max = %lu ns\n", min_diff_time.tv_nsec, max_diff_time.tv_nsec);
#endif
}
void update_difftimes(struct timespec start, struct timespec end) {
struct timespec diff_time = { .tv_sec = 0, .tv_nsec = 0 };
int changed = 0;
diff_time = clock_difftime(start, end);
if ((min_diff_time.tv_nsec == 0) || (diff_time.tv_nsec < min_diff_time.tv_nsec)) {
min_diff_time.tv_nsec = diff_time.tv_nsec;
changed = 1;
}
if ((max_diff_time.tv_nsec == 0) || (diff_time.tv_nsec > max_diff_time.tv_nsec)) {
max_diff_time.tv_nsec = diff_time.tv_nsec;
changed = 1;
}
#if 1
if (changed) print_difftimes();
#endif
}
/*------------------------------------------------------------------------*/
unsigned int build_rflocal(int txi, int txq, int rxi, int rxq) {
return (txi + (txq<<6) + (rxi<<12) + (rxq<<18));
}
unsigned int build_rfdc(int dcoff_i_rxfe, int dcoff_q_rxfe) {
return (dcoff_i_rxfe + (dcoff_q_rxfe<<8));
}
#if !defined(ENABLE_ITTI)
void signal_handler(int sig) {
void *array[10];
size_t size;
if (sig==SIGSEGV) {
// get void*'s for all entries on the stack
size = backtrace(array, 10);
// print out all the frames to stderr
fprintf(stderr, "Error: signal %d:\n", sig);
backtrace_symbols_fd(array, size, 2);
exit(-1);
} else {
printf("trying to exit gracefully...\n");
oai_exit = 1;
}
}
#endif
#define KNRM "\x1B[0m"
#define KRED "\x1B[31m"
#define KGRN "\x1B[32m"
#define KBLU "\x1B[34m"
#define RESET "\033[0m"
void exit_function(const char* file, const char* function, const int line, const char* s)
{
int CC_id;
if (s != NULL) {
printf("%s:%d %s() Exiting OAI softmodem: %s\n",file,line, function, s);
}
oai_exit = 1;
if (PHY_vars_UE_g && PHY_vars_UE_g[0]) {
for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
if (PHY_vars_UE_g[0][CC_id] && PHY_vars_UE_g[0][CC_id]->rfdevice.trx_end_func)
PHY_vars_UE_g[0][CC_id]->rfdevice.trx_end_func(&PHY_vars_UE_g[0][CC_id]->rfdevice);
}
}
#if defined(ENABLE_ITTI)
sleep(1); //allow lte-softmodem threads to exit first
itti_terminate_tasks (TASK_UNKNOWN);
#endif
}
#ifdef XFORMS
void reset_stats(FL_OBJECT *button, long arg) {
//int i,j,k;
/*PHY_VARS_eNB *phy_vars_eNB = PHY_vars_eNB_g[0][0];
for (i=0; i<NUMBER_OF_UE_MAX; i++) {
for (k=0; k<8; k++) { //harq_processes
for (j=0; j<phy_vars_eNB->dlsch[i][0]->Mlimit; j++) {
phy_vars_eNB->UE_stats[i].dlsch_NAK[k][j]=0;
phy_vars_eNB->UE_stats[i].dlsch_ACK[k][j]=0;
phy_vars_eNB->UE_stats[i].dlsch_trials[k][j]=0;
}
phy_vars_eNB->UE_stats[i].dlsch_l2_errors[k]=0;
phy_vars_eNB->UE_stats[i].ulsch_errors[k]=0;
phy_vars_eNB->UE_stats[i].ulsch_consecutive_errors=0;
for (j=0; j<phy_vars_eNB->ulsch[i]->Mlimit; j++) {
phy_vars_eNB->UE_stats[i].ulsch_decoding_attempts[k][j]=0;
phy_vars_eNB->UE_stats[i].ulsch_decoding_attempts_last[k][j]=0;
phy_vars_eNB->UE_stats[i].ulsch_round_errors[k][j]=0;
phy_vars_eNB->UE_stats[i].ulsch_round_fer[k][j]=0;
}
}
phy_vars_eNB->UE_stats[i].dlsch_sliding_cnt=0;
phy_vars_eNB->UE_stats[i].dlsch_NAK_round0=0;
phy_vars_eNB->UE_stats[i].dlsch_mcs_offset=0;
}*/
}
static void *scope_thread(void *arg) {
char stats_buffer[16384];
# ifdef ENABLE_XFORMS_WRITE_STATS
FILE *UE_stats, *eNB_stats;
# endif
//int len = 0;
struct sched_param sched_param;
//int UE_id, CC_id;
//int ue_cnt=0;
sched_param.sched_priority = sched_get_priority_min(SCHED_FIFO)+1;
sched_setscheduler(0, SCHED_FIFO,&sched_param);
printf("Scope thread has priority %d\n",sched_param.sched_priority);
# ifdef ENABLE_XFORMS_WRITE_STATS
UE_stats = fopen("UE_stats.txt", "w");
#endif
while (!oai_exit) {
//len = dump_ue_stats (PHY_vars_UE_g[0][0], &PHY_vars_UE_g[0][0]->proc.proc_rxtx[0],stats_buffer, 0, mode,rx_input_level_dBm);
//fl_set_object_label(form_stats->stats_text, stats_buffer);
fl_clear_browser(form_stats->stats_text);
fl_add_browser_line(form_stats->stats_text, stats_buffer);
if (PHY_vars_UE_g[0][0]->is_synchronized == 1)
phy_scope_UE(form_ue[0],
PHY_vars_UE_g[0][0],
0,0,7);
//else it is done in the synch thread
//printf("doing forms\n");
//usleep(100000); // 100 ms
sleep(1);
}
// printf("%s",stats_buffer);
# ifdef ENABLE_XFORMS_WRITE_STATS
if (UE_stats) {
rewind (UE_stats);
fwrite (stats_buffer, 1, len, UE_stats);
fclose (UE_stats);
}
# endif
pthread_exit((void*)arg);
}
#endif
#if defined(ENABLE_ITTI)
void *l2l1_task(void *arg) {
MessageDef *message_p = NULL;
int result;
itti_set_task_real_time(TASK_L2L1);
itti_mark_task_ready(TASK_L2L1);
do {
// Wait for a message
itti_receive_msg (TASK_L2L1, &message_p);
switch (ITTI_MSG_ID(message_p)) {
case TERMINATE_MESSAGE:
oai_exit=1;
itti_exit_task ();
break;
case ACTIVATE_MESSAGE:
start_UE = 1;
break;
case DEACTIVATE_MESSAGE:
start_UE = 0;
break;
case MESSAGE_TEST:
LOG_I(EMU, "Received %s\n", ITTI_MSG_NAME(message_p));
break;
default:
LOG_E(EMU, "Received unexpected message %s\n", ITTI_MSG_NAME(message_p));
break;
}
result = itti_free (ITTI_MSG_ORIGIN_ID(message_p), message_p);
AssertFatal (result == EXIT_SUCCESS, "Failed to free memory (%d)!\n", result);
} while(!oai_exit);
return NULL;
}
#endif
int16_t dlsch_demod_shift;
static void get_options(void) {
int CC_id;
int tddflag, nonbiotflag;
char *loopfile=NULL;
int dumpframe=0;
uint32_t online_log_messages;
uint32_t glog_level, glog_verbosity;
uint32_t start_telnetsrv;
paramdef_t cmdline_params[] =CMDLINE_PARAMS_DESC ;
paramdef_t cmdline_logparams[] =CMDLINE_LOGPARAMS_DESC ;
config_process_cmdline( cmdline_params,sizeof(cmdline_params)/sizeof(paramdef_t),NULL);
if (strlen(in_path) > 0) {
opt_type = OPT_PCAP;
opt_enabled=1;
printf("Enabling OPT for PCAP with the following file %s \n",in_path);
}
if (strlen(in_ip) > 0) {
opt_enabled=1;
opt_type = OPT_WIRESHARK;
printf("Enabling OPT for wireshark for local interface");
}
config_process_cmdline( cmdline_logparams,sizeof(cmdline_logparams)/sizeof(paramdef_t),NULL);
if(config_isparamset(cmdline_logparams,CMDLINE_ONLINELOG_IDX)) {
set_glog_onlinelog(online_log_messages);
}
if(config_isparamset(cmdline_logparams,CMDLINE_GLOGLEVEL_IDX)) {
set_glog(glog_level);
}
if (start_telnetsrv) {
load_module_shlib("telnetsrv",NULL,0,NULL);
}
paramdef_t cmdline_uemodeparams[] =CMDLINE_UEMODEPARAMS_DESC;
paramdef_t cmdline_ueparams[] =CMDLINE_UEPARAMS_DESC;
config_process_cmdline( cmdline_uemodeparams,sizeof(cmdline_uemodeparams)/sizeof(paramdef_t),NULL);
config_process_cmdline( cmdline_ueparams,sizeof(cmdline_ueparams)/sizeof(paramdef_t),NULL);
if (loopfile != NULL) {
printf("Input file for hardware emulation: %s\n",loopfile);
mode=loop_through_memory;
input_fd = fopen(loopfile,"r");
AssertFatal(input_fd != NULL,"Please provide a valid input file\n");
}
if ( (cmdline_uemodeparams[CMDLINE_CALIBUERX_IDX].paramflags & PARAMFLAG_PARAMSET) != 0) mode = rx_calib_ue;
if ( (cmdline_uemodeparams[CMDLINE_CALIBUERXMED_IDX].paramflags & PARAMFLAG_PARAMSET) != 0) mode = rx_calib_ue_med;
if ( (cmdline_uemodeparams[CMDLINE_CALIBUERXBYP_IDX].paramflags & PARAMFLAG_PARAMSET) != 0) mode = rx_calib_ue_byp;
if (cmdline_uemodeparams[CMDLINE_DEBUGUEPRACH_IDX].uptr)
if ( *(cmdline_uemodeparams[CMDLINE_DEBUGUEPRACH_IDX].uptr) > 0) mode = debug_prach;
if (cmdline_uemodeparams[CMDLINE_NOL2CONNECT_IDX].uptr)
if ( *(cmdline_uemodeparams[CMDLINE_NOL2CONNECT_IDX].uptr) > 0) mode = no_L2_connect;
if (cmdline_uemodeparams[CMDLINE_CALIBPRACHTX_IDX].uptr)
if ( *(cmdline_uemodeparams[CMDLINE_CALIBPRACHTX_IDX].uptr) > 0) mode = calib_prach_tx;
if (dumpframe > 0) mode = rx_dump_frame;
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
frame_parms[CC_id]->dl_CarrierFreq = downlink_frequency[0][0];
}
UE_scan=0;
if (tddflag > 0) {
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++)
frame_parms[CC_id]->frame_type = TDD;
}
/*if (frame_parms[0]->N_RB_DL !=0) {
if ( frame_parms[0]->N_RB_DL < 6 ) {
frame_parms[0]->N_RB_DL = 6;
printf ( "%i: Invalid number of ressource blocks, adjusted to 6\n",frame_parms[0]->N_RB_DL);
}
if ( frame_parms[0]->N_RB_DL > 100 ) {
frame_parms[0]->N_RB_DL = 100;
printf ( "%i: Invalid number of ressource blocks, adjusted to 100\n",frame_parms[0]->N_RB_DL);
}
if ( frame_parms[0]->N_RB_DL > 50 && frame_parms[0]->N_RB_DL < 100 ) {
frame_parms[0]->N_RB_DL = 50;
printf ( "%i: Invalid number of ressource blocks, adjusted to 50\n",frame_parms[0]->N_RB_DL);
}
if ( frame_parms[0]->N_RB_DL > 25 && frame_parms[0]->N_RB_DL < 50 ) {
frame_parms[0]->N_RB_DL = 25;
printf ( "%i: Invalid number of ressource blocks, adjusted to 25\n",frame_parms[0]->N_RB_DL);
}
UE_scan = 0;
frame_parms[0]->N_RB_UL=frame_parms[0]->N_RB_DL;
for (CC_id=1; CC_id<MAX_NUM_CCs; CC_id++) {
frame_parms[CC_id]->N_RB_DL=frame_parms[0]->N_RB_DL;
frame_parms[CC_id]->N_RB_UL=frame_parms[0]->N_RB_UL;
}
}*/
for (CC_id=1;CC_id<MAX_NUM_CCs;CC_id++) {
tx_max_power[CC_id]=tx_max_power[0];
rx_gain[0][CC_id] = rx_gain[0][0];
tx_gain[0][CC_id] = tx_gain[0][0];
}
#if T_TRACER
paramdef_t cmdline_ttraceparams[] =CMDLINE_TTRACEPARAMS_DESC ;
config_process_cmdline( cmdline_ttraceparams,sizeof(cmdline_ttraceparams)/sizeof(paramdef_t),NULL);
#endif
if ( !(CONFIG_ISFLAGSET(CONFIG_ABORT)) && (!(CONFIG_ISFLAGSET(CONFIG_NOOOPT))) ) {
// Here the configuration file is the XER encoded UE capabilities
// Read it in and store in asn1c data structures
sprintf(uecap_xer,"%stargets/PROJECTS/GENERIC-LTE-EPC/CONF/UE_config.xml",getenv("OPENAIR_HOME"));
printf("%s\n",uecap_xer);
uecap_xer_in=1;
} /* UE with config file */
}
#if T_TRACER
int T_nowait = 0; /* by default we wait for the tracer */
int T_port = 2021; /* default port to listen to to wait for the tracer */
int T_dont_fork = 0; /* default is to fork, see 'T_init' to understand */
#endif
void set_default_frame_parms(NR_DL_FRAME_PARMS *frame_parms[MAX_NUM_CCs]) {
int CC_id;
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
frame_parms[CC_id] = (NR_DL_FRAME_PARMS*) malloc(sizeof(NR_DL_FRAME_PARMS));
/* Set some default values that may be overwritten while reading options */
frame_parms[CC_id] = (NR_DL_FRAME_PARMS*) malloc(sizeof(NR_DL_FRAME_PARMS));
config[CC_id] = (nfapi_nr_config_request_t*) malloc(sizeof(nfapi_nr_config_request_t));
config[CC_id]->subframe_config.numerology_index_mu.value =1;
config[CC_id]->subframe_config.duplex_mode.value = 1; //FDD
config[CC_id]->subframe_config.dl_cyclic_prefix_type.value = 0; //NORMAL
config[CC_id]->rf_config.dl_carrier_bandwidth.value = 106;
config[CC_id]->rf_config.ul_carrier_bandwidth.value = 106;
config[CC_id]->rf_config.tx_antenna_ports.value = 1;
config[CC_id]->rf_config.rx_antenna_ports.value = 1;
config[CC_id]->sch_config.physical_cell_id.value = 0;
frame_parms[CC_id]->frame_type = FDD;
frame_parms[CC_id]->tdd_config = 3;
//frame_parms[CC_id]->tdd_config_S = 0;
frame_parms[CC_id]->N_RB_DL = 106;
frame_parms[CC_id]->N_RB_UL = 106;
frame_parms[CC_id]->Ncp = NORMAL;
//frame_parms[CC_id]->Ncp_UL = NORMAL;
frame_parms[CC_id]->Nid_cell = 0;
//frame_parms[CC_id]->num_MBSFN_config = 0;
frame_parms[CC_id]->nb_antenna_ports_eNB = 1;
frame_parms[CC_id]->nb_antennas_tx = 1;
frame_parms[CC_id]->nb_antennas_rx = 1;
//frame_parms[CC_id]->nushift = 0;
///frame_parms[CC_id]->phich_config_common.phich_resource = oneSixth;
//frame_parms[CC_id]->phich_config_common.phich_duration = normal;
// UL RS Config
/*frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.cyclicShift = 1;//n_DMRS1 set to 0
frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.groupHoppingEnabled = 1;
frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.sequenceHoppingEnabled = 0;
frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.groupAssignmentPUSCH = 0;
frame_parms[CC_id]->pusch_config_common.n_SB = 1;
frame_parms[CC_id]->pusch_config_common.hoppingMode = 0;
frame_parms[CC_id]->pusch_config_common.pusch_HoppingOffset = 0;
frame_parms[CC_id]->pusch_config_common.enable64QAM = 0;
frame_parms[CC_id]->prach_config_common.rootSequenceIndex=22;
frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig=1;
frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.prach_ConfigIndex=0;
frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.highSpeedFlag=0;
frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.prach_FreqOffset=0;*/
// NR: Init to legacy LTE 20Mhz params
frame_parms[CC_id]->numerology_index = 0;
frame_parms[CC_id]->ttis_per_subframe = 1;
frame_parms[CC_id]->slots_per_tti = 2;
}
}
void init_openair0(void);
void init_openair0() {
int card;
int i;
for (card=0; card<MAX_CARDS; card++) {
openair0_cfg[card].mmapped_dma=mmapped_dma;
openair0_cfg[card].configFilename = NULL;
if(frame_parms[0]->N_RB_DL == 106) {
if (numerology==0) {
if (frame_parms[0]->threequarter_fs) {
openair0_cfg[card].sample_rate=23.04e6;
openair0_cfg[card].samples_per_frame = 230400;
openair0_cfg[card].tx_bw = 10e6;
openair0_cfg[card].rx_bw = 10e6;
} else {
openair0_cfg[card].sample_rate=30.72e6;
openair0_cfg[card].samples_per_frame = 307200;
openair0_cfg[card].tx_bw = 10e6;
openair0_cfg[card].rx_bw = 10e6;
}
} else if (numerology==1) {
openair0_cfg[card].sample_rate=61.44e6;
openair0_cfg[card].samples_per_frame = 307200;
openair0_cfg[card].tx_bw = 20e6;
openair0_cfg[card].rx_bw = 20e6;
} else if (numerology==2) {
openair0_cfg[card].sample_rate=122.88e6;
openair0_cfg[card].samples_per_frame = 307200;
openair0_cfg[card].tx_bw = 40e6;
openair0_cfg[card].rx_bw = 40e6;
} else {
LOG_E(PHY,"Unsupported numerology!\n");
exit(-1);
}
} else if(frame_parms[0]->N_RB_DL == 50) {
openair0_cfg[card].sample_rate=15.36e6;
openair0_cfg[card].samples_per_frame = 153600;
openair0_cfg[card].tx_bw = 5e6;
openair0_cfg[card].rx_bw = 5e6;
} else if (frame_parms[0]->N_RB_DL == 25) {
openair0_cfg[card].sample_rate=7.68e6;
openair0_cfg[card].samples_per_frame = 76800;
openair0_cfg[card].tx_bw = 2.5e6;
openair0_cfg[card].rx_bw = 2.5e6;
} else if (frame_parms[0]->N_RB_DL == 6) {
openair0_cfg[card].sample_rate=1.92e6;
openair0_cfg[card].samples_per_frame = 19200;
openair0_cfg[card].tx_bw = 1.5e6;
openair0_cfg[card].rx_bw = 1.5e6;
}
if (frame_parms[0]->frame_type==TDD)
openair0_cfg[card].duplex_mode = duplex_mode_TDD;
else //FDD
openair0_cfg[card].duplex_mode = duplex_mode_FDD;
printf("HW: Configuring card %d, nb_antennas_tx/rx %d/%d\n",card,
PHY_vars_UE_g[0][0]->frame_parms.nb_antennas_tx,
PHY_vars_UE_g[0][0]->frame_parms.nb_antennas_rx);
openair0_cfg[card].Mod_id = 0;
openair0_cfg[card].num_rb_dl=frame_parms[0]->N_RB_DL;
openair0_cfg[card].clock_source = clock_source;
openair0_cfg[card].tx_num_channels=min(2,PHY_vars_UE_g[0][0]->frame_parms.nb_antennas_tx);
openair0_cfg[card].rx_num_channels=min(2,PHY_vars_UE_g[0][0]->frame_parms.nb_antennas_rx);
for (i=0; i<4; i++) {
if (i<openair0_cfg[card].tx_num_channels)
openair0_cfg[card].tx_freq[i] = downlink_frequency[0][i]+uplink_frequency_offset[0][i];
else
openair0_cfg[card].tx_freq[i]=0.0;
if (i<openair0_cfg[card].rx_num_channels)
openair0_cfg[card].rx_freq[i] = downlink_frequency[0][i];
else
openair0_cfg[card].rx_freq[i]=0.0;
openair0_cfg[card].autocal[i] = 1;
openair0_cfg[card].tx_gain[i] = tx_gain[0][i];
openair0_cfg[card].rx_gain[i] = PHY_vars_UE_g[0][0]->rx_total_gain_dB - rx_gain_off;
openair0_cfg[card].configFilename = rf_config_file;
printf("Card %d, channel %d, Setting tx_gain %f, rx_gain %f, tx_freq %f, rx_freq %f\n",
card,i, openair0_cfg[card].tx_gain[i],
openair0_cfg[card].rx_gain[i],
openair0_cfg[card].tx_freq[i],
openair0_cfg[card].rx_freq[i]);
}
#ifndef OAI_ADRV9371_ZC706
if (usrp_args) openair0_cfg[card].sdr_addrs = usrp_args;
#endif
if (usrp_clksrc) {
if (strcmp(usrp_clksrc, "internal") == 0) {
openair0_cfg[card].clock_source = internal;
LOG_D(PHY, "USRP clock source set as internal\n");
} else if (strcmp(usrp_clksrc, "external") == 0) {
openair0_cfg[card].clock_source = external;
LOG_D(PHY, "USRP clock source set as external\n");
} else if (strcmp(usrp_clksrc, "gpsdo") == 0) {
openair0_cfg[card].clock_source = gpsdo;
LOG_D(PHY, "USRP clock source set as gpsdo\n");
} else {
openair0_cfg[card].clock_source = internal;
LOG_I(PHY, "USRP clock source unknown ('%s'). defaulting to internal\n", usrp_clksrc);
}
} else {
openair0_cfg[card].clock_source = internal;
LOG_I(PHY, "USRP clock source not specified. defaulting to internal\n");
}
}
}
int main( int argc, char **argv ) {
int i;//j,k,aa,re;
#if defined (XFORMS)
void *status;
#endif
int CC_id;
uint8_t abstraction_flag=0;
//uint8_t beta_ACK=0,beta_RI=0,beta_CQI=2;
#if defined (XFORMS)
int ret;
#endif
PHY_VARS_NR_UE *UE[MAX_NUM_CCs];
start_background_system();
if ( load_configmodule(argc,argv) == NULL) {
exit_fun("[SOFTMODEM] Error, configuration module init failed\n");
}
CONFIG_SETRTFLAG(CONFIG_NOEXITONHELP);
#ifdef DEBUG_CONSOLE
setvbuf(stdout, NULL, _IONBF, 0);
setvbuf(stderr, NULL, _IONBF, 0);
#endif
set_default_frame_parms(frame_parms);
mode = normal_txrx;
memset(&openair0_cfg[0],0,sizeof(openair0_config_t)*MAX_CARDS);
memset(tx_max_power,0,sizeof(int)*MAX_NUM_CCs);
set_latency_target();
// initialize logging
logInit();
// get options and fill parameters from configuration file
get_options (); //Command-line options, enb_properties
#if T_TRACER
T_Config_Init();
#endif
// initialize the log (see log.h for details)
set_glog(OAILOG_DEBUG);
set_log(HW, OAILOG_DEBUG);
set_log(PHY, OAILOG_DEBUG);
set_log(MAC, OAILOG_INFO);
set_log(RLC, OAILOG_INFO);
set_log(PDCP, OAILOG_INFO);
set_log(OTG, OAILOG_INFO);
set_log(RRC, OAILOG_INFO);
#if defined(ENABLE_ITTI)
set_log(SIM, OAILOG_INFO);
# if defined(ENABLE_USE_MME)
set_log(NAS, OAILOG_INFO);
# endif
#endif
//randominit (0);
set_taus_seed (0);
printf("configuring for UE\n");
//if (ouput_vcd)
// VCD_SIGNAL_DUMPER_INIT("/tmp/openair_dump_UE.vcd");
//if (opp_enabled ==1) {
// reset_opp_meas();
//}
cpuf=get_cpu_freq_GHz();
#if defined(ENABLE_ITTI)
//log_set_instance_type (LOG_INSTANCE_UE);
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info);
// initialize mscgen log after ITTI
MSC_INIT(MSC_E_UTRAN, THREAD_MAX+TASK_MAX);
#endif
if (opt_type != OPT_NONE) {
if (init_opt(in_path, in_ip) == -1)
LOG_E(OPT,"failed to run OPT \n");
}
#ifdef PDCP_USE_NETLINK
netlink_init();
#if defined(PDCP_USE_NETLINK_QUEUES)
pdcp_netlink_init();
#endif
#endif
#if !defined(ENABLE_ITTI)
// to make a graceful exit when ctrl-c is pressed
signal(SIGSEGV, signal_handler);
signal(SIGINT, signal_handler);
#endif
check_clock();
#ifndef PACKAGE_VERSION
# define PACKAGE_VERSION "UNKNOWN-EXPERIMENTAL"
#endif
LOG_I(HW, "Version: %s\n", PACKAGE_VERSION);
// init the parameters
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
frame_parms[CC_id]->nb_antennas_tx = nb_antenna_tx;
frame_parms[CC_id]->nb_antennas_rx = nb_antenna_rx;
frame_parms[CC_id]->nb_antenna_ports_eNB = 1; //initial value overwritten by initial sync later
LOG_I(PHY,"Set nb_rx_antenna %d , nb_tx_antenna %d \n",frame_parms[CC_id]->nb_antennas_rx, frame_parms[CC_id]->nb_antennas_tx);
//init_ul_hopping(frame_parms[CC_id]);
//phy_init_nr_top(frame_parms[CC_id]);
}
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
//init prach for openair1 test
// prach_fmt = get_prach_fmt(frame_parms->prach_config_common.prach_ConfigInfo.prach_ConfigIndex, frame_parms->frame_type);
// N_ZC = (prach_fmt <4)?839:139;
}
NB_UE_INST=1;
NB_INST=1;
PHY_vars_UE_g = malloc(sizeof(PHY_VARS_NR_UE**));
PHY_vars_UE_g[0] = malloc(sizeof(PHY_VARS_NR_UE*)*MAX_NUM_CCs);
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
printf("PHY_vars_UE_g[0][%d] = %p\n",CC_id,UE[CC_id]);
printf("frame_parms %d\n",frame_parms[CC_id]->ofdm_symbol_size);
nr_init_frame_parms_ue(frame_parms[CC_id],numerology,NORMAL,frame_parms[CC_id]->N_RB_DL,(frame_parms[CC_id]->N_RB_DL-20)>>1,0);
PHY_vars_UE_g[0][CC_id] = init_nr_ue_vars(frame_parms[CC_id], 0,abstraction_flag);
UE[CC_id] = PHY_vars_UE_g[0][CC_id];
if (phy_test==1)
UE[CC_id]->mac_enabled = 0;
else
UE[CC_id]->mac_enabled = 1;
if (UE[CC_id]->mac_enabled == 0) { //set default UL parameters for testing mode
for (i=0; i<NUMBER_OF_CONNECTED_eNB_MAX; i++) {
//UE[CC_id]->pusch_config_dedicated[i] = malloc(sizeof(PUSCH_CONFIG_DEDICATED));
//UE[CC_id]->scheduling_request_config[i] = malloc(sizeof(SCHEDULING_REQUEST_CONFIG));
/*UE[CC_id]->pusch_config_dedicated[i].betaOffset_ACK_Index = beta_ACK;
UE[CC_id]->pusch_config_dedicated[i].betaOffset_RI_Index = beta_RI;
UE[CC_id]->pusch_config_dedicated[i].betaOffset_CQI_Index = beta_CQI;
UE[CC_id]->scheduling_request_config[i].sr_PUCCH_ResourceIndex = 0;
UE[CC_id]->scheduling_request_config[i].sr_ConfigIndex = 7+(0%3);
UE[CC_id]->scheduling_request_config[i].dsr_TransMax = sr_n4;*/
}
}
UE[CC_id]->UE_scan = UE_scan;
UE[CC_id]->UE_scan_carrier = UE_scan_carrier;
UE[CC_id]->mode = mode;
printf("UE[%d]->mode = %d\n",CC_id,mode);
for (uint8_t i=0; i<RX_NB_TH_MAX; i++) {
//UE[CC_id]->pdcch_vars[i][0]->agregationLevel = agregation_Level;
//UE[CC_id]->pdcch_vars[i][0]->dciFormat = dci_Format;
}
/*compute_prach_seq(&UE[CC_id]->frame_parms.prach_config_common,
UE[CC_id]->frame_parms.frame_type,
UE[CC_id]->X_u);*/
if (UE[CC_id]->mac_enabled == 1)
{
UE[CC_id]->pdcch_vars[0][0]->crnti = 0x1234;
UE[CC_id]->pdcch_vars[1][0]->crnti = 0x1234;
}
else
{
UE[CC_id]->pdcch_vars[0][0]->crnti = 0x1235;
UE[CC_id]->pdcch_vars[1][0]->crnti = 0x1235;
}
UE[CC_id]->rx_total_gain_dB = (int)rx_gain[CC_id][0] + rx_gain_off;
UE[CC_id]->tx_power_max_dBm = tx_max_power[CC_id];
if (frame_parms[CC_id]->frame_type==FDD) {
UE[CC_id]->N_TA_offset = 0;
} else {
if (frame_parms[CC_id]->N_RB_DL == 100)
UE[CC_id]->N_TA_offset = 624;
else if (frame_parms[CC_id]->N_RB_DL == 50)
UE[CC_id]->N_TA_offset = 624/2;
else if (frame_parms[CC_id]->N_RB_DL == 25)
UE[CC_id]->N_TA_offset = 624/4;
}
}
// printf("tx_max_power = %d -> amp %d\n",tx_max_power[0],get_tx_amp(tx_max_poHwer,tx_max_power));
fill_modeled_runtime_table(runtime_phy_rx,runtime_phy_tx);
cpuf=get_cpu_freq_GHz();
//dump_frame_parms(frame_parms[0]);
init_openair0();
#ifndef DEADLINE_SCHEDULER
/* Currently we set affinity for UHD to CPU 0 for eNB/UE and only if number of CPUS >2 */
cpu_set_t cpuset;
int s;
char cpu_affinity[1024];
CPU_ZERO(&cpuset);
#ifdef CPU_AFFINITY
if (get_nprocs() > 2) {
CPU_SET(0, &cpuset);
s = pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset);
if (s != 0) {
perror( "pthread_setaffinity_np");
exit_fun("Error setting processor affinity");
}
LOG_I(HW, "Setting the affinity of main function to CPU 0, for device library to use CPU 0 only!\n");
}
#endif
/* Check the actual affinity mask assigned to the thread */
s = pthread_getaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset);
if (s != 0) {
perror( "pthread_getaffinity_np");
exit_fun("Error getting processor affinity ");
}
memset(cpu_affinity, 0 , sizeof(cpu_affinity));
for (int j = 0; j < CPU_SETSIZE; j++) {
if (CPU_ISSET(j, &cpuset)) {
char temp[1024];
sprintf(temp, " CPU_%d ", j);
strcat(cpu_affinity, temp);
}
}
LOG_I(HW, "CPU Affinity of main() function is... %s\n", cpu_affinity);
#endif
//openair0_cfg[0].log_level = glog_level;
/*int eMBMS_active=0;
if (node_function[0] <= NGFI_RAU_IF4p5) { // don't initialize L2 for RRU
LOG_I(PHY,"Intializing L2\n");
mac_xface = malloc(sizeof(MAC_xface));
l2_init(frame_parms[0],eMBMS_active,(uecap_xer_in==1)?uecap_xer:NULL,
0,// cba_group_active
0); // HO flag
mac_xface->macphy_exit = &exit_fun;
} else if (node_function[0] == NGFI_RRU_IF4p5) { // Initialize PRACH in this case
}*/
#if defined(ENABLE_ITTI)
// don't create if node doesn't connect to RRC/S1/GTP
/*if (create_tasks(1) < 0) {
printf("cannot create ITTI tasks\n");
exit(-1); // need a softer mode
}*/
printf("ITTI tasks created\n");
#endif
/*if (phy_test==0) {
if (UE_flag==1) {
printf("Filling UE band info\n");
fill_ue_band_info();
mac_xface->dl_phy_sync_success (0, 0, 0, 1);
} else if (node_function[0]>NGFI_RRU_IF4p5)
mac_xface->mrbch_phy_sync_failure (0, 0, 0);
}*/
// init UE_PF_PO and mutex lock
pthread_mutex_init(&ue_pf_po_mutex, NULL);
memset (&UE_PF_PO[0][0], 0, sizeof(UE_PF_PO_t)*NUMBER_OF_UE_MAX*MAX_NUM_CCs);
mlockall(MCL_CURRENT | MCL_FUTURE);
pthread_cond_init(&sync_cond,NULL);
pthread_mutex_init(&sync_mutex, NULL);
#ifdef XFORMS
int UE_id;
int fl_argc=1;
if (do_forms==1) {
// fl_initialize messes with argv and argc, so pretend to not pass any options
fl_initialize (&fl_argc, argv, NULL, 0, 0);
// restore the original command line args
// argv = fl_get_cmdline_args( &argc );
form_stats = create_form_stats_form();
fl_show_form (form_stats->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "stats");
UE_id = 0;
form_ue[UE_id] = create_lte_phy_scope_ue();
sprintf (title, "NR DL SCOPE UE");
fl_show_form (form_ue[UE_id]->lte_phy_scope_ue, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
/*
if (openair_daq_vars.use_ia_receiver) {
fl_set_button(form_ue[UE_id]->button_0,1);
fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver ON");
} else {
fl_set_button(form_ue[UE_id]->button_0,0);
fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver OFF");
}*/
fl_set_button(form_ue[UE_id]->button_0,0);
fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver OFF");
ret = pthread_create(&forms_thread, NULL, scope_thread, NULL);
if (ret == 0)
pthread_setname_np( forms_thread, "xforms" );
printf("Scope thread created, ret=%d\n",ret);
}
#endif
rt_sleep_ns(10*100000000ULL);
init_UE(1);
number_of_cards = 1;
for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
PHY_vars_UE_g[0][CC_id]->rf_map.card=0;
PHY_vars_UE_g[0][CC_id]->rf_map.chain=CC_id+chain_offset;
}
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
#if defined(OAI_USRP) || defined(OAI_ADRV9371_ZC706)
UE[CC_id]->hw_timing_advance = timing_advance;
#else
UE[CC_id]->hw_timing_advance = 160;
#endif
}
if (input_fd) {
printf("Reading in from file to antenna buffer %d\n",0);
if (fread(UE[0]->common_vars.rxdata[0],
sizeof(int32_t),
frame_parms[0]->samples_per_subframe*10,
input_fd) != frame_parms[0]->samples_per_subframe*10)
printf("error reading from file\n");
}
sleep(3);
printf("Sending sync to all threads\n");
pthread_mutex_lock(&sync_mutex);
sync_var=0;
pthread_cond_broadcast(&sync_cond);
pthread_mutex_unlock(&sync_mutex);
// wait for end of program
printf("TYPE <CTRL-C> TO TERMINATE\n");
//getchar();
/*
#if defined(ENABLE_ITTI)
printf("Entering ITTI signals handler\n");
itti_wait_tasks_end();
oai_exit=1;
#else
*/
while (oai_exit==0)
rt_sleep_ns(100000000ULL);
//#endif
// stop threads
#ifdef XFORMS
printf("waiting for XFORMS thread\n");
if (do_forms==1) {
pthread_join(forms_thread,&status);
fl_hide_form(form_stats->stats_form);
fl_free_form(form_stats->stats_form);
fl_hide_form(form_ue[0]->lte_phy_scope_ue);
fl_free_form(form_ue[0]->lte_phy_scope_ue);
}
#endif
printf("stopping MODEM threads\n");
pthread_cond_destroy(&sync_cond);
pthread_mutex_destroy(&sync_mutex);
// *** Handle per CC_id openair0
if (PHY_vars_UE_g[0][0]->rfdevice.trx_end_func)
PHY_vars_UE_g[0][0]->rfdevice.trx_end_func(&PHY_vars_UE_g[0][0]->rfdevice);
//if (ouput_vcd)
//VCD_SIGNAL_DUMPER_CLOSE();
if (opt_enabled == 1)
terminate_opt();
logClean();
return 0;
}
Reference in New Issue View Git Blame Copy Permalink