maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
76b91cfefb3d755ab6d294f4ecb58d6bae0dda09
openairinterface5g/targets/SIMU/USER/Makefile
T
Navid Nikaein 76b91cfefb * add additional RLC buffer information for fine grain DL scheduling 
* protect ENABLE_DB flag with explicit user-defined flag



git-svn-id: http://svn.eurecom.fr/openair4G/trunk@4036 818b1a75-f10b-46b9-bf7c-635c3b92a50f
2013-07-18 11:53:58 +00:00

462 lines
15 KiB
Makefile
Raw Blame History

CC = gcc
MPICC = gcc #mpicc
CPUFLAGS = -mmmx -msse -msse2 -msse4.1 -march=native
# FORCE ssse3 for compilation of openair on User Mode Linux
CPUFLAGS += $(shell if grep --silent ssse3 /proc/cpuinfo ; then echo "-mssse3" ; else if grep --silent User\ Mode\ Linux /proc/cpuinfo ; then echo "-mssse3" ; else echo ""; fi; fi)
CPUFLAGS += $(shell if grep --silent sse4 /proc/cpuinfo ; then echo "-msse4" ; else echo ""; fi)
linux = $(shell if [ `uname` = "Linux" ] ; then echo "1" ; else echo "0" ; fi)
NUM_CORES=$(shell cat /proc/cpuinfo | grep processor | wc -l)
TOP_DIR = $(OPENAIR1_DIR)
OPENAIR1_TOP = $(OPENAIR1_DIR)
OPENAIR2_TOP = $(OPENAIR2_DIR)
OPENAIR3_TOP = $(OPENAIR3_DIR)
OPENAIR3 = $(OPENAIR3_DIR)
CFLAGS = -Wall -fno-strict-aliasing -DUSER_MODE -DNB_ANTENNAS_RX=2 -DNB_ANTENNAS_TXRX=2 -DNB_ANTENNAS_TX=2 -g -ggdb $(CPUFLAGS) -I/usr/include/X11 #-Wno-packed-bitfield-compat
# Check if GCC version is greater or equal to 4.4
GCCVERSIONGTEQ44 := $(shell expr `gcc -dumpversion | cut -f1,2 -d. --output-delimiter=""` \>= 44)
ifeq "$(GCCVERSIONGTEQ44)" "1"
CFLAGS += -Wno-packed-bitfield-compat
endif
ASN1_MSG_INC = $(OPENAIR2_DIR)/RRC/LITE/MESSAGES
CFLAGS += -DOPENAIR_LTE -DPUCCH #-DOFDMA_ULSCH -DIFFT_FPGA -DIFFT_FPGA_UE
CFLAGS += -DMAC_CONTEXT=1 -DPHY_CONTEXT=1 -DPHY_ABSTRACTION #-DPHY_ABSTRACTION_UL #-DRLC_UM_TEST_TRAFFIC=1
CFLAGS += -DNEW_FFT
#CFLAGS += -DLLR8
ifndef OPENAIR2
OPENAIR2=1
endif
ifndef OPENAIR_EMU
export OPENAIR_EMU=1
endif
ifdef EMOS
CFLAGS+=-DEMOS
endif
ifdef TRAFFIC_TM5
CFLAGS += -DRLC_UM_TEST_TRAFFIC=1 #-DFULL_BUFFER=1
endif
# activate OCG and libxml only under linux
ifeq ($(linux),1)
CFLAGS += -I/usr/include/libxml2 -L/usr/local/lib -I/usr/include/atlas -L/usr/X11R6/lib
OCG_FLAG = 1
cygwin=0
CFLAGS += -DLINUX
else
cygwin=1
OCG_FLAG = 0
endif
ifdef SMBV
CFLAGS += -DSMBV
endif
ifdef XFORMS
CFLAGS += -DXFORMS
endif
ifdef DB
# Check if libmysqlclient is installed and use it if found to store simulation data for postprocessing
ENABLE_DB = $(shell if [ `dpkg -l | grep libmysqlclient -c` = "0" ]; then echo "0" ; else echo "1" ; fi )
ifeq ($(ENABLE_DB), 1)
CFLAGS +=-I/usr/include/mysql -L/usr/lib/mysql -DENABLE_DB_STATS
DB_LDFLAGS = -lmysqlclient
endif
endif
ifdef PRINT_STATS
CFLAGS += -DPRINT_STATS
endif
ifndef rrc_cellular
rrc_cellular = 0
rrc_cellular_eNB = 0
rrc_cellular_UE = 0
else
ifeq ($(eNB_flag),1)
rrc_cellular_eNB=1
endif
ifeq ($(UE_flag),1)
rrc_cellular_UE=1
endif
endif
ifdef DEBUG_PHY
CFLAGS += -DDEBUG_PHY
endif
ifdef JF
CFLAGS += -DJUMBO_FRAME
endif
ifdef LS
CFLAGS += -DLARGE_SCALE
endif
# ln -sf EUTRA-RRC-Definitions-a20.asn EUTRA-RRC-Definitions.asn
# make cleanasn1
#make all Rel10=1
#export IS_REL10=$(shell if [ -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel10 ] ; then echo "1" ; else echo "0" ; fi)
#export IS_REL8=$(shell if [ -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel8 ] ; then echo "1" ; else echo "0" ; fi)
ifdef CBA
CFLAGS += -DRel10
CFLAGS += -DCBA
@echo "Rel10=1 CBA=1"
else ifdef Rel10
CFLAGS += -DRel10
@echo "Rel10=1"
#ifeq ($(IS_REL10), 0)
# $(/bin/bash cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/ ; rm EUTRA-RRC-Definitions.asn ln -s EUTRA-RRC-Definitions-a20.asn EUTRA-RRC-Definitions.asn ; cd $(OPENAIR_TARGETS)/SIMU/USER/ ; rm -f $(ASN1_MSG_OBJS1) ; rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc.generated ; rm -f $(L2_OBJS) ; rm -f *.o ; rm -f oaisim ; rm -f oaisim_pad; touch $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel10 ; rm $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel8 ; $(OPENAIR_TARGETS)/SCRIPTS/asn1_generate_rrc_messaging_c_code.bash )
#endif
else # default is rel 8
@echo "Rel8=1"
CFLAGS += -DRel8
#ifeq ($(IS_REL8), 0)
# $(/bin/bash cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/ ; rm EUTRA-RRC-Definitions.asn ln -s EUTRA-RRC-Definitions-86.asn EUTRA-RRC-Definitions.asn ; cd $(OPENAIR_TARGETS)/SIMU/USER/ ; rm -f $(ASN1_MSG_OBJS1) ; rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc.generated ; rm -f $(L2_OBJS); rm -f *.o ; rm -f oaisim ; touch $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel8 ; rm $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel10 ; $(OPENAIR_TARGETS)/SCRIPTS/asn1_generate_rrc_messaging_c_code.bash )
#endif
endif
ifeq ($(NAS), 1)
CFLAGS += -DNAS_NETLINK -DLINUX
NAS_FLAG=1
endif
ifdef TEST_OMG
CFLAGS += -DTEST_OMG
#CFLAGS += -DDEBUG_OMG
endif
# after the execution, a profiling output "gmon.out" will be created,
#then we need to run "gprof ./oaisim > gmon.txt" in the same directory as "gmon.out"
# you could also use the script "grpof2dot.py gmon.txt" for visual diagrams
ifdef GPROF
CFLAGS += -pg
endif
#require kernel patch for oai driver to enable address autoconfiguration (IPv6 only)
ifdef ADDCONF
CFLAGS+=-DADDRCONF
endif
ifdef OAI_NW_DRIVER_TYPE_ETHERNET
CFLAGS+=-DOAI_NW_DRIVER_TYPE_ETHERNET
endif
CFLAGS += $(shell if [ `uname -o` = "Cygwin" ] ; then echo "-DCYGWIN" ;fi)
CFLAGS += -DENABLE_FXP -DOAI_EMU -DENABLE_USE_CPU_EXECUTION_TIME -DXER_PRINT
ifneq ($(USE_MME), R8)
UPDATE_RELEASE_9=1
endif
include $(OPENAIR1_DIR)/PHY/Makefile.inc
include $(OPENAIR1_DIR)/SCHED/Makefile.inc
include $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc
include $(OPENAIR2_DIR)/LAYER2/Makefile.inc
include $(OPENAIR1_DIR)/SIMULATION/ETH_TRANSPORT/Makefile.inc
include $(OPENAIR2_DIR)/RRC/NAS/Makefile.inc
include $(OPENAIR2_DIR)/UTIL/Makefile.inc
include $(OPENAIR2_DIR)/S1AP/Makefile.inc
include $(OPENAIR2_DIR)/S1AP/MESSAGES/Makefile.inc
#LOG_OBJS += $(LOG_DIR)/vcd_signal_dumper.o
#LOG_OBJS += $(LOG_DIR)/log.o
CFLAGS += -DENB_MODE
S1AP_BUILT_OBJS=
ifdef USE_MME
CFLAGS += -DENABLE_USE_MME
CFLAGS_S1AP += -DENB_MODE -DENABLE_USE_MME -DEMIT_ASN_DEBUG=1 -DUSER_MODE
S1AP_BUILT_OBJS += $(S1AP_OBJS) $(addprefix $(OPENAIR2_DIR)/S1AP/MESSAGES/, $(S1AP_ASN_MODULE_SOURCES))
endif
SIMULATION_OBJS = $(TOP_DIR)/SIMULATION/TOOLS/gauss.o
SIMULATION_OBJS += $(TOP_DIR)/SIMULATION/TOOLS/random_channel.o
SIMULATION_OBJS += $(TOP_DIR)/SIMULATION/TOOLS/rangen_double.o
SIMULATION_OBJS += $(TOP_DIR)/SIMULATION/TOOLS/taus.o
SIMULATION_OBJS += $(TOP_DIR)/SIMULATION/TOOLS/multipath_channel.o
SIMULATION_OBJS += $(TOP_DIR)/SIMULATION/TOOLS/abstraction.o
SIMULATION_OBJS += $(TOP_DIR)/SIMULATION/RF/rf.o
SIMULATION_OBJS += $(TOP_DIR)/SIMULATION/RF/adc.o
SIMULATION_OBJS += $(TOP_DIR)/SIMULATION/RF/dac.o
ASN1_MSG_OBJS1=$(addprefix $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/, $(ASN1_MSG_OBJS))
#L2_OBJS =
#EXTRA_CFLAGS =
OAISIM_OBJS = channel_sim.o
OAISIM_OBJS += init_lte.o
OAISIM_OBJS += oaisim_config.o
OAISIM_OBJS += sinr_sim.o
OAISIM_OBJS += cor_SF_sim.o
#OAISIM_OBJS += phy_procedures_sim_form.o
OAISIM_OBJS += oaisim_functions.o
ifdef XFORMS
TOOLS_OBJS += $(OPENAIR1_DIR)/PHY/TOOLS/lte_phy_scope.o
endif
ifdef PAD
CFLAGS += -DPAD
endif
OAISIM_PAD_OBJS = discrete_event_generator.o
OAISIM_PAD_OBJS += threadpool.o
#deactivate the log offloading
ifndef LOG_THREAD
CFLAGS +=-DLOG_NO_THREAD
endif
ifdef PROC
INT_OBJS +=$(OPENAIR_TARGETS)/SIMU/PROC/channel_sim_proc.o
INT_OBJS +=$(OPENAIR_TARGETS)/SIMU/PROC/Process.o
CFLAGS +=-DPROC
endif
CFLAGS += -DENABLE_VCD_FIFO
CFLAGS += -DENABLE_NEW_MULTICAST
# CFLAGS += -DENABLE_LOG_FIFO
# Check if libpgm is installed and use it if found instead of the unreliable
# multicast
ENABLE_PGM = $(shell if pkg-config --exists openpgm-5.1; then echo "1" ; else echo "0"; fi)
ifeq ($(ENABLE_PGM), 1)
CFLAGS += `pkg-config --cflags openpgm-5.1` -DENABLE_PGM_TRANSPORT
PGM_LDFLAGS = `pkg-config --libs openpgm-5.1`
endif
OBJ = $(PHY_OBJS) $(SIMULATION_OBJS) $(ETHERNET_TRANSPORT_OBJS) $(TOOLS_OBJS) $(SCHED_OBJS) $(STATS_OBJS) $(OAISIM_OBJS) $(NAS_OBJS) $(INT_OBJS) $(UTIL_OBJ)
ifeq ($(OPENAIR2),1)
OBJ += $(L2_OBJS)
endif
all: oaisim
pad: oaisim_pad
userclean: cleanall oaisim
printvars:
@echo LINUX variable is $(linux)
@echo CYGWIN variable is $(cygwin)
@echo rrc_cellular variable is $(rrc_cellular)
@echo EXTRA_CFLAGS = $(EXTRA_CFLAGS)
@echo OAI Config generator is $(OCG_FLAG)
@echo OAI NETLINK FLAG is $(NAS_FLAG)
@echo SSE3 proc is $(SSE3PROC)
@echo L2 objs are $(L2_OBJS)
@echo eNB_flag is $(eNB_flag)
@echo UE_flag is $(UE_flag)
@echo S1AP objs: $(S1AP_BUILT_OBJS)
@echo CFLAGS: $(CFLAGS)
@echo Enable PGM: $(ENABLE_PGM)
ASN1RELDIR=R9.8
ifeq ($(USE_MME), R8)
ASN1RELDIR=R8.10
else
CFLAGS_S1AP += -DUPDATE_RELEASE_9
endif
S1AP_DIR=$(OPENAIR2_DIR)/S1AP
ASN1MESSAGESDIR=$(S1AP_DIR)/MESSAGES
ASN1DIR=$(ASN1MESSAGESDIR)/ASN1
-include $(OBJ:.o=.d)
-include $(ASN1_MSG_OBJS1:.o=.d)
$(OBJ) $(OAISIM_PAD_OBJS) $(ASN1_MSG_OBJS1) : %.o : %.c
@echo Compiling $<
@$(CC) -c $(CFLAGS) $(EXTRA_CFLAGS) -DPHY_CONTEXT=1 -I$(TOP_DIR) $(L2_incl) $(UTIL_incl) -I$(ASN1_MSG_INC) -o $@ $<
@$(CC) -MM $(CFLAGS) $(EXTRA_CFLAGS) -DPHY_CONTEXT=1 -I$(TOP_DIR) $(L2_incl) $(UTIL_incl) -I$(ASN1_MSG_INC) $*.c > $*.d
@mv -f $*.d $*.d.tmp
@sed -e 's|.*:|$*.o:|' < $*.d.tmp > $*.d
@sed -e 's/.*://' -e 's/\\$$//' < $*.d.tmp | fmt -1 | \
sed -e 's/^ *//' -e 's/$$/:/' >> $*.d
@rm -f $*.d.tmp
$(S1AP_BUILT_OBJS): %.o : %.c
@echo Compiling $<
@$(CC) -Wall -c $(CFLAGS_S1AP) $(S1AP_Incl) $(UTIL_incl) -o $@ $<
$(ASN1MESSAGESDIR)/s1ap_ieregen.stamp: $(ASN1DIR)/$(ASN1RELDIR)/S1AP-PDU-Contents.asn $(ASN1DIR)/asn1tostruct.py
echo Timestamp > $@
(cd $(ASN1DIR) && python $(ASN1DIR)/asn1tostruct.py -f$<)
$(ASN1MESSAGESDIR)/s1ap_asn1regen.stamp: $(ASN1DIR)/$(ASN1RELDIR)/S1AP-CommonDataTypes.asn $(ASN1DIR)/$(ASN1RELDIR)/S1AP-Constants.asn $(ASN1DIR)/$(ASN1RELDIR)/S1AP-IEs.asn $(ASN1DIR)/$(ASN1RELDIR)/S1AP-PDU.asn
echo Timestamp > $@
(cd $(ASN1MESSAGESDIR) && asn1c -gen-PER -fnative-types -fskeletons-copy $^)
$(S1AP_DIR)/libs1ap.a: $(ASN1MESSAGESDIR)/s1ap_ieregen.stamp $(ASN1MESSAGESDIR)/s1ap_asn1regen.stamp $(S1AP_BUILT_OBJS)
@echo Creating $@
$(AR) rcs $@ $^
$(LFDS_DIR)/bin/liblfds611.a:
$(MAKE) -C $(LFDS_DIR) -f makefile.linux
oaisim_pad : $(OBJ) $(OAISIM_PAD_OBJS) $(ASN1_MSG_OBJS1) oaisim_pad.c
@echo "Compiling oaisim_pad.c ..."
@$(MPICC) -I$(TOP_DIR) $(L2_incl) $(UTIL_incl) -I$(ASN1_MSG_INC) $(S1AP_Incl) -o oaisim_pad $(CFLAGS) $(EXTRA_CFLAGS) $^ \
-lm -lblas -lpthread -llapack_atlas -lforms -lxml2 -lX11 -lXpm -lrt
ifdef USE_MME
oaisim : $(ASN1_MSG_OBJS1) $(OBJ) $(S1AP_DIR)/libs1ap.a oaisim.c $(LFDS_DIR)/bin/liblfds611.a
else
oaisim : $(ASN1_MSG_OBJS1) $(OBJ) oaisim.c $(LFDS_DIR)/bin/liblfds611.a
endif
@echo "Compiling oaisim.c ..."
@$(CC) -I$(TOP_DIR) $(L2_incl) $(UTIL_incl) -I$(ASN1_MSG_INC) $(S1AP_Incl) -o oaisim $(CFLAGS) $(EXTRA_CFLAGS) $^ \
-lm -lblas -lpthread -llapack_atlas -lforms -lxml2 -lX11 -lXpm -lrt $(LFDS_DIR)/bin/liblfds611.a $(PGM_LDFLAGS) $(DB_LDFLAGS)
ifeq ($(rrc_cellular_eNB),1)
mv oaisim oaisim_eNB
endif
ifeq ($(rrc_cellular_UE),1)
mv oaisim oaisim_UE
endif
oaisimCROWN : $(OBJ) $(ASN1_MSG_OBJS1) oaisimCROWN.c
@echo "Compiling oaisimCROWN.c ..."
@$(CC) oaisimCROWN.c -I$(TOP_DIR) $(L2_incl) $(UTIL_incl) -I$(ASN1_MSG_INC) $(S1AP_Incl) -o oaisimCROWN $(CFLAGS) $(EXTRA_CFLAGS) $(OBJ) $(ASN1_MSG_OBJS1) -lm -lblas -lpthread -llapack_atlas -lforms -lxml2 -lX11 -lXpm -lrt
test_nasmesh_fix:
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH/RB_TOOL && $(MAKE))
(cd $(OPENAIR2_DIR) && $(MAKE) nasmesh_netlink_address_fix.ko)
(cp $(OPENAIR2_DIR)/NAS/DRIVER/MESH/nasmesh.ko . )
nasmesh_fix:
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH/RB_TOOL && $(MAKE))
(cd $(OPENAIR2_DIR) && $(MAKE) nasmesh_netlink_address_fix.ko)
(sudo insmod $(OPENAIR2_DIR)/NAS/DRIVER/MESH/nasmesh.ko)
nasmesh_nl:
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH/RB_TOOL && $(MAKE))
(cd $(OPENAIR2_DIR) && $(MAKE) nasmesh_netlink.ko)
(sudo insmod $(OPENAIR2_DIR)/NAS/DRIVER/MESH/nasmesh.ko)
rb_tool:
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH/RB_TOOL && $(MAKE))
nasmesh_install:
(sudo rmmod nasmesh)
(sudo insmod $(OPENAIR2_DIR)/NAS/DRIVER/MESH/nasmesh.ko)
nas_sim_mt_cellular:
( cd $(OPENAIR2_DIR)/NAS/SIMU_CELLULAR && make nasmt_sim CELLULAR=1 NO_RRM=1)
nas_sim_rg_cellular:
( cd $(OPENAIR2_DIR)/NAS/SIMU_CELLULAR && make nasrg_sim MASTER=1 CELLULAR=1 NO_RRM=1)
rrm_std_cellular:
( cd $(OPENAIR2_DIR)/NAS/SIMU_CELLULAR && make cell_rrm CELL_RRM=1 CELLULAR=1 NO_RRM=1)
cleanall: clean cleanasn1 cleanmmeasn1
clean:
$(MAKE) -C $(LFDS_DIR) -f makefile.linux clean
rm -f oaisim
rm -f oaisim_pad
rm -f $(OBJ)
rm -f $(S1AP_BUILT_OBJS)
rm -f $(ASN1MESSAGESDIR)/libs1ap.a
rm -f *.o
rm -f *.exe*
rm -f $(ASN1_MSG_INC)/asn1_msg.o
rm -f $(OBJ:.o=.d) $(ASN1_MSG_OBJS1:.o=.d)
cleanl1:
rm -f oaisim
rm -f $(PHY_OBJS) $(SCHED_OBJS)
rm -f *.o
rm -f *.exe
cleanl2:
rm -f $(L2_OBJS)
rm $(ASN1_MSG_INC)/asn1_msg.o
cleanasn1:
rm -f $(ASN1_MSG_OBJS1)
$(shell cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES ; rm -f $(ASN_MODULE_SOURCES) $(ASN_MODULE_HEADERS) *.o *.d )
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.am.sample
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc.generated
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel10
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel8
cleanmmeasn1:
rm -f $(S1AP_BUILT_OBJS)
rm -f $(S1AP_BUILT_OBJS:.o:.c)
rm -f $(ASN1MESSAGESDIR)/libs1ap.a
rm -f $(ASN1MESSAGESDIR)/s1ap_asn1regen.stamp
rm -f $(ASN1MESSAGESDIR)/s1ap_ieregen.stamp
cleancell:
rm -f $(OPENAIR2_DIR)/RRC/CELLULAR/*.o
rm -f $(OPENAIR2_DIR)/RRC/CELLULAR/*.d
rm -f $(OPENAIR2_DIR)/RRC/L2_INTERFACE/*.o
rm -f $(OPENAIR2_DIR)/RRC/L2_INTERFACE/*.d
rm -f $(OPENAIR2_DIR)/NAS/SIMU_CELLULAR/*.o
rm -f $(OPENAIR2_DIR)/NAS/SIMU_CELLULAR/*.d
print:
# @echo $(cygwin)
@echo $(OBJ)
@echo $(OCG_FLAG)
@echo "CFLAGS are " $(CFLAGS)
@echo "EXTRA_CFLAGS are" $(EXTRA_CFLAGS)
@echo "IS_REL8 is " $(IS_REL10)
@echo "IS_REL8 is " $(IS_REL8)
@echo "ENABLE_DB is " $(ENABLE_DB)
showcflags:
@echo $(CFLAGS)
otg_all : otg_latency otg_gp
# need to check if the file exists before calling otgplot
otg_latency:
export TITLE="Application OWD(ms)"
cp /tmp/otg_latency.dat /tmp/onewaydelay.dat
$(OPENAIR2_DIR)/UTIL/OTG/OTGplot "/tmp/otg_latency.dat" "[$(COL1):$(COL2)]"
otg_latency_bg:
export TITLE="Background OWD(ms)"
$(OPENAIR2_DIR)/UTIL/OTG/OTGplot "/tmp/otg_latency_bg.dat" "[$(COL1):$(COL2)]"
otg_gp:
export TITLE="Application Goodput(Kb/s)"
cp /tmp/otg_GP.dat /tmp/goodput.dat
$(OPENAIR2_DIR)/UTIL/OTG/OTGplot "/tmp/goodput.dat" "[$(COL1):$(COL2)]"
otg_gp_bg:
export TITLE="Background Goodput(Kb/s)"
$(OPENAIR2_DIR)/UTIL/OTG/OTGplot "/tmp/otg_GP_bg.dat" "[$(COL1):$(COL2)]"
otg_jitter:
export TITLE="Aplication Jitter(ms)"
$(OPENAIR2_DIR)/UTIL/OTG/OTGplot "/tmp/otg_jitter.dat" "[$(COL1):$(COL2)]"
pexpect = $(shell if [ `dpkg -l | grep pexpect -c` = "0" ]; then echo "0" ; else echo "1" ; fi )
pre-ci:
@echo "Pre-commit check"
ifeq ($(pexpect), 1)
ifndef PW
@echo "Usage: make pre-ci PW=mypassword"
@echo "Password is used to access the local host through ssh."
python $(OPENAIR_TARGETS)/TEST/OAI/test01.py
else
python $(OPENAIR_TARGETS)/TEST/OAI/test01.py -w $(PW)
endif
else
@echo "Python pexpect package is missing, please install"
endif
Reference in New Issue View Git Blame Copy Permalink