maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
7757b9e7e75f16449a6c72a5f16541c36474c1ea
openairinterface5g/cmake_targets/build_oai
T
Cedric Roux 7757b9e7e7 import NFAPI work from David Price from Cisco (non-working commit, do not use it) 
It has been chosen to not include the full history of commits
from David. He included a binary version of wireshark, probably
a modified one that understands NFAPI. Wireshark is released under
the GPL license, we cannot include it in the repository. We could
have done a next commit to remove this binary. But then it would
still be present in the history of commits, which may not be allowed.
And it would take space on disk. We could edit the history to remove
wireshark entirely. But this operation is too complicated.

There was also a pcap capture file, which has nothing to do in
the history of commits and would take space on disk. There again,
it's too difficult to edit the history to remove it.

There was a file .gitignore that was also removed.

The original history can be found on David's repository:
https://gitlab.eurecom.fr/daveprice/openairinterface5g/
The branch is: nfapi-ru-rau-split.

A copy of that branch has been included in the internal OAI
repository, for those who have access to it.
The branch is the same. The last commit ID is
9106438239e0bc626ff1fa1d97d911caadd0fbb9.

You can compare the current commit with the commit 9106...
to see what differs.

The current commit has to be considered non-working.
The commit following the current commit will fix problems with
the work in the current commit.

If you use git bisect, don't spend time analyzing the current
commit.
2018-01-15 11:32:30 +01:00

960 lines
33 KiB
Bash
Executable File
Raw Blame History

#!/bin/bash
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
# file build_oai
# brief OAI automated build tool that can be used to install, compile, run OAI.
# author Navid Nikaein, Lionel GAUTHIER, Laurent Thomas
set -e
################################
# include helper functions
################################
ORIGIN_PATH=$PWD
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
source $THIS_SCRIPT_PATH/tools/build_helper
# set environment variables (OPENAIR_HOME, ...)
set_openair_env
#variables for UE data generation
gen_nvram_path=$OPENAIR_DIR/targets/bin
conf_nvram_path=$OPENAIR_DIR/openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf
MSC_GEN="False"
XFORMS="True"
FLEXRAN_AGENT_SB_IF="True"
PRINT_STATS="False"
VCD_TIMING="False"
DEADLINE_SCHEDULER_FLAG_USER="False"
FORCE_DEADLINE_SCHEDULER_FLAG_USER=""
CPU_AFFINITY_FLAG_USER="False" #Only valid when lowlatecy flag is set to False
REL="Rel14"
HW="None"
TP="None"
NOS1=0
EPC=0
VERBOSE_COMPILE=0
CFLAGS_PROCESSOR_USER=""
RUN_GROUP=0
TEST_CASE_GROUP=""
BUILD_DOXYGEN=0
T_TRACER="False"
DISABLE_HARDWARE_DEPENDENCY="False"
CMAKE_BUILD_TYPE=""
CMAKE_CMD="$CMAKE"
UE_AUTOTEST_TRACE="False"
UE_DEBUG_TRACE="False"
UE_TIMING_TRACE="False"
DISABLE_LOG_X="False"
USRP_REC_PLAY="False"
BUILD_ECLIPSE=0
trap handle_ctrl_c INT
function print_help() {
echo_info "
This program installs OpenAirInterface Software
You should have ubuntu 14.xx, updated, and the Linux kernel >= 3.14
Options
-h
This help
-c | --clean
Erase all files to make a rebuild from start
-C | --clean-all
Erase all files made by previous compilations, installations
--clean-kernel
Erase previously installed features in kernel: iptables, drivers, ...
-I | --install-external-packages
Installs required packages such as LibXML, asn1.1 compiler, freediameter, ...
This option will require root password
--install-optional-packages
Install useful but not mandatory packages such as valgrind
-g | --run-with-gdb
Add debugging symbols to compilation directives. It also disables any compiler optimization. Only for debugging. Do not use in normal operation!
-h | --help
Print this help
--eNB
Makes the LTE softmodem
--UE
Makes the UE specific parts (ue_ip, usim, nvram) from the given configuration file
--UE-conf-nvram [configuration file]
Specify conf_nvram_path (default \"$conf_nvram_path\")
--UE-gen-nvram [output path]
Specify gen_nvram_path (default \"$gen_nvram_path\")
--RRH
Makes the RRH
-a | --agent
Enables agent for software-defined control of the eNB
-r | --3gpp-release
default is Rel14,
Rel8 limits the implementation to 3GPP Release 8 version
Rel10 limits the implementation to 3GPP Release 10 version
-w | --hardware
EXMIMO, USRP, BLADERF, ETHERNET, LMSSDR, None (Default)
Adds this RF board support (in external packages installation and in compilation)
-t | --transport protocol
ETHERNET , None
Adds this trasport protocol support in compilation
--oaisim
Makes the oaisim simulator. Hardware will be defaulted to \"None\".
--phy_simulators
Makes the unitary tests Layer 1 simulators
--core_simulators
Makes the core security features unitary simulators
-s | --check
runs a set of auto-tests based on simulators and several compilation tests
--run-group
runs only specified test cases specified here. This flag is only valid with -s
-V | --vcd
Adds a debgging facility to the binary files: GUI with major internal synchronization events
-x | --xforms
Adds a software oscilloscope feature to the produced binaries. If oaisim, then enable PRINT_STATS.
--install-system-files
Install OpenArInterface required files in Linux system
(will ask root password)
--noS1
Compiles oaisim or lte-softmodem without S1 interface, using direct link to IP instead
--verbose-compile
Shows detailed compilation instructions in makefile
--cflags_processor
Manually Add CFLAGS of processor if they are not detected correctly by script. Only add these flags if you know your processor supports them. Example flags: -msse3 -msse4.1 -msse4.2 -mavx2
--build-doxygen
Builds doxygen based documentation.
--disable-deadline
Disables deadline scheduler of Linux kernel (>=3.14.x).
--enable-deadline
Enable deadline scheduler of Linux kernel (>=3.14.x).
--disable-cpu-affinity
Disables CPU Affinity between UHD/TX/RX Threads (Valid only when deadline scheduler is disabled). By defaulT, CPU Affinity is enabled when not using deadline scheduler. It is enabled only with >2 CPUs. For eNB, CPU_0-> Device library (UHD), CPU_1->TX Threads, CPU_2...CPU_MAX->Rx Threads. For UE, CPU_0->Device Library(UHD), CPU_1..CPU_MAX -> All the UE threads
--T-tracer
Enables the T tracer.
--disable-hardware-dependency
Disable HW dependency during installation
--ue-autotest-trace
Enable specific traces for UE autotest framework
--ue-trace
Enable traces for UE debugging
--ue-timing
Enable traces for timing
--disable-log
Disable all LOG_* macros
--build-eclipse
Build eclipse project files. Paths are auto corrected by fixprj.sh
--usrp-recplay
Build for I/Q record-playback modes
Usage (first build):
oaisim (eNB + UE): ./build_oai -I --oaisim -x --install-system-files
Eurecom EXMIMO + COTS UE : ./build_oai -I --eNB -x --install-system-files
NI/ETTUS B201 + COTS UE : ./build_oai -I --eNB -x --install-system-files -w USRP
Usage (Regular):
oaisim : ./build_oai --oaisim -x
Eurecom EXMIMO + OAI ENB : ./build_oai --eNB -x
NI/ETTUS B201 + OAI ENB : ./build_oai --eNB -x -w USRP"
}
function main() {
until [ -z "$1" ]
do
case "$1" in
-c | --clean)
CLEAN=1
shift;;
-C | --clean-all)
CLEAN_ALL=1
shift;;
--clean-kernel)
clean_kernel
echo_info "Erased iptables config and removed modules from kernel"
shift;;
-I | --install-external-packages)
INSTALL_EXTERNAL=1
echo_info "Will install external packages"
shift;;
--install-optional-packages)
INSTALL_OPTIONAL=1
echo_info "Will install optional packages"
shift;;
-g | --run-with-gdb)
GDB=1
CMAKE_BUILD_TYPE="Debug"
echo_info "Will Compile with gdb symbols and disable compiler optimization"
CMAKE_CMD="$CMAKE_CMD -DCMAKE_BUILD_TYPE=Debug --trace-expand"
shift;;
--eNB)
eNB=1
echo_info "Will compile eNB"
shift;;
-a | --agent)
FLEXRAN_AGENT=1
echo_info "Will compile eNB with agent support"
shift;;
--UE)
UE=1
echo_info "Will compile UE"
shift;;
--UE-conf-nvram)
conf_nvram_path=$(readlink -f "$1")
shift 2;;
--UE-gen-nvram)
gen_nvram_path=$(readlink -f $2)
shift 2;;
--RRH)
RRH=1
echo_info "Will compile RRH"
shift;;
-r | --3gpp-release)
REL=$2
echo_info "Setting release to: $REL"
shift 2;;
-w | --hardware)
HW="$2" #"${i#*=}"
# Use OAI_USRP as the key word USRP is used inside UHD driver
if [ "$HW" != "BLADERF" -a "$HW" != "USRP" -a "$HW" != "LMSSDR" -a "$HW" != "None" -a "$HW" != "EXMIMO" ] ; then
echo_fatal "Unknown HW type $HW will exit..."
else
if [ "$HW" == "USRP" ] ; then
HW="OAI_USRP"
fi
if [ "$HW" == "BLADERF" ] ; then
HW="OAI_BLADERF"
fi
if [ "$HW" == "LMSSDR" ] ; then
HW="OAI_LMSSDR"
fi
echo_info "Setting hardware to: $HW"
fi
shift 2;;
-t | --transport_protocol)
TP="$2" #"${i#*=}"
if [ "$TP" != "ETHERNET" -a "$TP" != "None" ] ; then
echo_fatal "Unknown TP type $TP will exit..."
else
echo_info "Setting transport protocol to: $TP"
fi
shift 2;;
--oaisim)
oaisim=1
echo_info "Will compile oaisim and drivers nasmesh, ..."
shift;;
--phy_simulators)
SIMUS_PHY=1
echo_info "Will compile dlsim, ulsim, ..."
shift;;
--core_simulators)
SIMUS_CORE=1
echo_info "Will compile security unitary tests"
shift;;
-s | --check)
OAI_TEST=1
echo_info "Will run auto-tests"
shift;;
--run-group)
RUN_GROUP=1
TEST_CASE_GROUP=$2
echo_info "executing test cases only in group: $TEST_CASE_GROUP"
shift 2;;
-V | --vcd)
echo_info "Setting gtk-wave output"
VCD_TIMING=1
EXE_ARGUMENTS="$EXE_ARGUMENTS -V"
shift;;
-x | --xforms)
XFORMS="True"
EXE_ARGUMENTS="$EXE_ARGUMENTS -d"
echo_info "Will generate the software oscilloscope features"
shift;;
--install-system-files)
INSTALL_SYSTEM_FILES=1
echo_info "Will copy OpenAirInterface files in Linux directories"
shift;;
--noS1)
NOS1=1
echo_info "Will compile without S1 interface"
shift;;
--verbose-compile)
VERBOSE_COMPILE=1
echo_info "Will compile with verbose instructions"
shift;;
--cflags_processor)
CFLAGS_PROCESSOR_USER=$2
echo_info "Setting CPU FLAGS from USER to: $CFLAGS_PROCESSOR_USER"
shift 2;;
--build-doxygen)
BUILD_DOXYGEN=1
echo_info "Will build doxygen support"
shift;;
--disable-deadline)
FORCE_DEADLINE_SCHEDULER_FLAG_USER="False"
echo_info "Disabling the usage of deadline scheduler"
shift 1;;
--enable-deadline)
FORCE_DEADLINE_SCHEDULER_FLAG_USER="True"
echo_info "Enabling the usage of deadline scheduler"
shift 1;;
--disable-cpu-affinity)
CPU_AFFINITY_FLAG_USER="False"
echo_info "Disabling CPU Affinity (only valid when not using deadline scheduler)"
shift 1;;
--T-tracer)
T_TRACER="True"
echo_info "Enabling the T tracer"
shift 1;;
--disable-hardware-dependency)
echo_info "Disabling hardware dependency for compiling software"
DISABLE_HARDWARE_DEPENDENCY="True"
shift 1;;
--ue-autotest-trace)
UE_AUTOTEST_TRACE="True"
echo_info "Enabling autotest specific trace for UE"
shift 1;;
--ue-trace)
UE_DEBUG_TRACE="True"
echo_info "Enabling UE trace for debug"
shift 1;;
--ue-timing)
UE_TIMING_TRACE="True"
echo_info "Enabling UE timing trace"
shift 1;;
--disable-log)
DISABLE_LOG_X="True"
echo_info "Disabling all LOG_* traces"
shift 1;;
--uhd-images-dir)
UHD_IMAGES_DIR=$2
echo_info "Downloading UHD images in the indicated location"
shift 2;;
--build-eclipse)
BUILD_ECLIPSE=1
CMAKE_CMD="$CMAKE_CMD"' -DCMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT=TRUE -G"Eclipse CDT4 - Unix Makefiles"'
echo_info "Enabling build eclipse project support"
shift 1;;
--build-telnetsrv)
BUILD_TELNETSRV=1
echo_info "Build embedded telnet server"
shift ;;
--usrp-recplay)
USRP_REC_PLAY="True"
echo_info "Enabling USRP record playback mode"
shift 1;;
-h | --help)
print_help
exit 1;;
*)
print_help
echo_fatal "Unknown option $1"
break;;
esac
done
CMAKE_CMD="$CMAKE_CMD .."
echo_info "CMAKE_CMD=$CMAKE_CMD"
#########################################################
# check validity of HW and TP parameters for RRH and eNB
#########################################################
# to be discussed
if [ "$eNB" = "1" ] ; then
if [ "$HW" = "None" -a "$TP" = "None" ] ; then
echo_fatal "Define a local radio head (e.g. -w EXMIMO) or a transport protocol (e.g. -t ETHERNET) to communicate with a remote radio head!"
fi
if [ "$HW" = "None" ] ; then
echo_info "No radio head has been selected (HW set to $HW)"
fi
if [ "$TP" = "None" ] ; then
echo_info "No transport protocol has been selected (TP set to $TP)"
fi
fi
if [ "$RRH" = "1" ] ; then
if [ "$TP" = "None" ] ; then
echo_fatal "A transport protocol (e.g. -t ETHERNET) must be defined!"
fi
if [ "$HW" = "None" ] ; then
echo_info "No radio head has been selected (HW set to $HW)"
fi
fi
echo_info "RF HW set to $HW"
#Now we set flags to enable deadline scheduler settings
#By default: USRP: disable,
#By default: BLADERF: enable,
#By default: EXMIMO: enable
if [ "$FORCE_DEADLINE_SCHEDULER_FLAG_USER" = "" ]; then
if [ "$HW" = "EXMIMO" ] ; then
DEADLINE_SCHEDULER_FLAG_USER="True"
elif [ "$HW" = "ETHERNET" ] ; then
DEADLINE_SCHEDULER_FLAG_USER="False"
elif [ "$HW" = "OAI_USRP" ] ; then
DEADLINE_SCHEDULER_FLAG_USER="False"
elif [ "$HW" = "OAI_BLADERF" ] ; then
DEADLINE_SCHEDULER_FLAG_USER="False"
elif [ "$HW" = "OAI_LMSSDR" ] ; then
DEADLINE_SCHEDULER_FLAG_USER="False"
elif [ "$HW" = "None" ] ; then
DEADLINE_SCHEDULER_FLAG_USER="False"
else
echo_error "Unknown HW type $HW. Exiting now..."
exit
fi
else
DEADLINE_SCHEDULER_FLAG_USER=$FORCE_DEADLINE_SCHEDULER_FLAG_USER
fi
#Disable CPU Affinity for deadline scheduler
if [ "$DEADLINE_SCHEDULER_FLAG_USER" = "True" ] ; then
CPU_AFFINITY_FLAG_USER="False"
fi
echo_info "Flags for Deadline scheduler: $DEADLINE_SCHEDULER_FLAG_USER"
echo_info "Flags for CPU Affinity: $CPU_AFFINITY_FLAG_USER"
if [ -n "$UHD_IMAGES_DIR" ] && [ -z "$INSTALL_EXTERNAL" ]; then
echo_error "UHD images download settings will not be applied without -I present"
exit
fi
############################################
# setting and printing OAI envs, we should check here
############################################
echo_info "2. Setting the OAI PATHS ..."
cecho "OPENAIR_DIR = $OPENAIR_DIR" $green
# for conf files copy in this bash script
if [ -d /usr/lib/freeDiameter ]; then
export FREEDIAMETER_PREFIX=/usr
else
if [ -d /usr/local/lib/freeDiameter ]; then
export FREEDIAMETER_PREFIX=/usr/local
else
echo_warning "FreeDiameter prefix not found, install freeDiameter if EPC, HSS"
fi
fi
if [ "$CLEAN_ALL" = "1" ] ; then
clean_all_files
echo_info "Erased all previously producted files"
fi
dbin=$OPENAIR_DIR/targets/bin
dlog=$OPENAIR_DIR/cmake_targets/log
mkdir -p $dbin $dlog
if [ "$INSTALL_EXTERNAL" = "1" ] ; then
echo_info "Installing packages"
check_install_oai_software
if [ "$HW" == "OAI_USRP" ] ; then
echo_info "installing packages for USRP support"
check_install_usrp_uhd_driver
if [ ! "$DISABLE_HARDWARE_DEPENDENCY" == "True" ]; then
install_usrp_uhd_driver $UHD_IMAGES_DIR
fi
fi
if [ "$HW" == "OAI_BLADERF" ] ; then
echo_info "installing packages for BLADERF support"
check_install_bladerf_driver
if [ ! "$DISABLE_HARDWARE_DEPENDENCY" == "True" ]; then
flash_firmware_bladerf
fi
fi
if [ "$FLEXRAN_AGENT" == "1" ] ; then
echo_info "installing protobuf/protobuf-c for flexran agent support"
install_protobuf_from_source
install_protobuf_c_from_source
fi
fi
if [ "$INSTALL_OPTIONAL" = "1" ] ; then
echo_info "Installing optional packages"
check_install_additional_tools
fi
if [ "$oaisim" = "1" ] ; then
#to be discussed
# there is no RF device transport protocol
HW="None"
TP="ETHERNET"
if [ "$XFORMS" == "True" ] ; then
PRINT_STATS="True"
fi
fi
echo_info "3. building the compilation directives ..."
DIR=$OPENAIR_DIR/cmake_targets
if [ "$NOS1" = "1" ] ; then
lte_build_dir=lte_noS1_build_oai
lte_exec=lte-softmodem-nos1
else
lte_build_dir=lte_build_oai
lte_exec=lte-softmodem
fi
# configuration module libraries, one currently available, using libconfig
config_libconfig_shlib=params_libconfig
# first generate the CMakefile in the right directory
if [ "$eNB" = "1" -o "$UE" = "1" -o "$HW" = "EXMIMO" ] ; then
# LTE softmodem compilation
[ "$CLEAN" = "1" ] && rm -rf $DIR/$lte_build_dir/build
mkdir -p $DIR/$lte_build_dir/build
cmake_file=$DIR/$lte_build_dir/CMakeLists.txt
echo "cmake_minimum_required(VERSION 2.8)" > $cmake_file
if [ "$NOS1" = "1" ] ; then
cat $DIR/$lte_build_dir/CMakeLists.template >> $cmake_file
fi
echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )" >> $cmake_file
echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )" >> $cmake_file
echo "set ( XFORMS $XFORMS )" >> $cmake_file
if [ "$FLEXRAN_AGENT" = "1" ] ; then
echo "set ( FLEXRAN_AGENT_SB_IF $FLEXRAN_AGENT_SB_IF )" >> $cmake_file
fi
echo "set ( RRC_ASN1_VERSION \"${REL}\")" >> $cmake_file
echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )" >> $cmake_file
echo "set ( RF_BOARD \"${HW}\")" >> $cmake_file
echo "set ( TRANSP_PRO \"${TP}\")" >> $cmake_file
echo "set(PACKAGE_NAME \"${lte_exec}\")" >> $cmake_file
echo "set (DEADLINE_SCHEDULER \"${DEADLINE_SCHEDULER_FLAG_USER}\" )" >>$cmake_file
echo "set (CPU_AFFINITY \"${CPU_AFFINITY_FLAG_USER}\" )" >>$cmake_file
echo "set ( T_TRACER $T_TRACER )" >> $cmake_file
echo "set (UE_AUTOTEST_TRACE $UE_AUTOTEST_TRACE)" >> $cmake_file
echo "set (UE_DEBUG_TRACE $UE_DEBUG_TRACE)" >> $cmake_file
echo "set (UE_TIMING_TRACE $UE_TIMING_TRACE)" >> $cmake_file
echo "set (DISABLE_LOG_X $DISABLE_LOG_X)" >> $cmake_file
echo "set (USRP_REC_PLAY $USRP_REC_PLAY)" >> $cmake_file
if [ "$UE" = 1 -a "$NOS1" = "0" ] ; then
echo_info "Compiling UE S1 build : enabling Linux and NETLINK"
echo "set (LINUX True )" >> $cmake_file
echo "set (PDCP_USE_NETLINK True )" >> $cmake_file
fi
echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
cd $DIR/$lte_build_dir/build
eval $CMAKE_CMD
fi
if [ "$eNB" = "1" -o "$UE" = "1" ] ; then
echo_info "Compiling $lte_exec"
compilations \
$lte_build_dir $lte_exec \
$lte_exec $dbin/$lte_exec.$REL
# mandatory shared lib
compilations \
$lte_build_dir $config_libconfig_shlib \
lib$config_libconfig_shlib.so $dbin/lib$config_libconfig_shlib.so
if [ "$NOS1" = "1" ] ; then
compilations \
$lte_build_dir nasmesh \
CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
compilations \
$lte_build_dir rb_tool \
rb_tool $dbin/rb_tool
cp $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $dbin
fi
fi
if [ "$UE" = 1 -a "$NOS1" = "0" ] ; then
# ue_ip driver compilation
echo_info "Compiling UE specific part"
compilations \
$lte_build_dir ue_ip \
CMakeFiles/ue_ip/ue_ip.ko $dbin/ue_ip.ko
# mkdir -p $DIR/at_commands/build
# cd $DIR/at_commands/build
# eval $CMAKE_CMD
# compilations \
# at_commands at_nas_ue \
# at_nas_ue $dbin/at_nas_ue
[ "$CLEAN" = "1" ] && rm -rf $DIR/nas_sim_tools/build
mkdir -p $DIR/nas_sim_tools/build
cd $DIR/nas_sim_tools/build
eval $CMAKE_CMD
compilations \
nas_sim_tools usim \
usim $dbin/usim
compilations \
nas_sim_tools nvram \
nvram $dbin/nvram
compilations \
nas_sim_tools conf2uedata \
conf2uedata $dbin/conf2uedata
# generate USIM data
if [ -f $dbin/conf2uedata ]; then
install_nas_tools $conf_nvram_path $gen_nvram_path
echo_info "Copying UE specific part to $DIR/$lte_build_dir/build"
cp -Rvf $dbin/.ue_emm.nvram0 $DIR/$lte_build_dir/build
cp -Rvf $dbin/.ue.nvram0 $DIR/$lte_build_dir/build
cp -Rvf $dbin/.usim.nvram0 $DIR/$lte_build_dir/build
else
echo_warning "not generated UE NAS files: binaries not found"
fi
fi
if [ "$SIMUS_PHY" = "1" -o "$SIMUS_CORE" = "1" ] ; then
cd $OPENAIR_DIR/cmake_targets/lte-simulators
[ "$CLEAN" = "1" ] && rm -rf build
mkdir -p build
cd build
rm -f *sim
eval $CMAKE_CMD
fi
if [ "$SIMUS_PHY" = "1" ] ; then
# lte unitary simulators compilation
echo_info "Compiling unitary tests simulators"
simlist="dlsim_tm4 dlsim ulsim pucchsim prachsim pdcchsim pbchsim mbmssim"
for f in $simlist ; do
compilations \
lte-simulators $f \
$f $dbin/$f.$REL
done
fi
# Core simulators
#############
if [ "$SIMUS_CORE" = "1" ] ; then
# lte unitary simulators compilation
echo_info "Compiling unitary tests simulators"
simlist="secu_knas_encrypt_eia1 secu_kenb aes128_ctr_encrypt aes128_ctr_decrypt secu_knas_encrypt_eea2 secu_knas secu_knas_encrypt_eea1 kdf aes128_cmac_encrypt secu_knas_encrypt_eia2"
for f in $simlist ; do
compilations \
lte-simulators test_$f \
test_$f $dbin/test_$f.$REL
done
fi
# EXMIMO drivers & firmware loader
###############
if [ "$HW" = "EXMIMO" ] ; then
echo_info "Compiling Express MIMO 2 board drivers"
compilations \
$lte_build_dir openair_rf \
CMakeFiles/openair_rf/openair_rf.ko $dbin/openair_rf.ko
compilations \
$lte_build_dir updatefw \
updatefw $dbin/updatefw
echo_info "Compiling oarf tools. The logfile for compilation is here: $dlog/oarf.txt"
make -C $OPENAIR_DIR/cmake_targets/$lte_build_dir/build oarf > $dlog/oarf.txt 2>&1
cp $OPENAIR_DIR/cmake_targets/$lte_build_dir/build/*.oct $dbin
if [ -s $dbin/oarf_config_exmimo.oct ] ; then
echo_success "oarf tools compiled"
else
echo_error "oarf tools compilation failed"
fi
cp $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 $dbin
fi
# oaisim compilation
###############
if [ "$oaisim" = "1" ] ; then
dconf=$OPENAIR_DIR/targets/bin
if [ "$NOS1" = "1" ] ; then
oaisim_build_dir=oaisim_noS1_build_oai
oaisim_exec=oaisim_nos1
else
oaisim_build_dir=oaisim_build_oai
oaisim_exec=oaisim
fi
echo_info "Compiling $oaisim_exec ($oaisim_build_dir)"
cmake_file=$DIR/$oaisim_build_dir/CMakeLists.txt
cp $DIR/$oaisim_build_dir/CMakeLists.template $cmake_file
echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )" >> $cmake_file
echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )" >> $cmake_file
echo "set ( XFORMS $XFORMS )" >> $cmake_file
if [ "$FLEXRAN_AGENT" = "1" ] ; then
echo "set ( FLEXRAN_AGENT_SB_IF $FLEXRAN_AGENT_SB_IF )" >> $cmake_file
fi
echo "set ( PRINT_STATS $PRINT_STATS )" >> $cmake_file
echo "set ( RRC_ASN1_VERSION \"${REL}\")" >> $cmake_file
echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )" >> $cmake_file
echo "set ( T_TRACER $T_TRACER )" >> $cmake_file
echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
[ "$CLEAN" = "1" ] && rm -rf $DIR/$oaisim_build_dir/build
mkdir -p $DIR/$oaisim_build_dir/build
cd $DIR/$oaisim_build_dir/build
eval $CMAKE_CMD
compilations \
$oaisim_build_dir $oaisim_exec \
$oaisim_exec $dbin/$oaisim_exec.$REL
if [ "$NOS1" != "1" ] ; then
[ "$CLEAN" = "1" ] && rm -rf $DIR/at_commands/build
echo_info "Compiling at_nas_ue"
mkdir -p $DIR/at_commands/build
cd $DIR/at_commands/build
eval $CMAKE_CMD
compilations \
at_commands at_nas_ue \
at_nas_ue $dbin/at_nas_ue
# ue_ip driver compilation
echo_info "Compiling UE specific part (ue_ip driver and usim tools)"
compilations \
oaisim_build_oai ue_ip \
CMakeFiles/ue_ip/ue_ip.ko $dbin/ue_ip.ko
[ "$CLEAN" = "1" ] && rm -rf $DIR/nas_sim_tools/build
mkdir -p $DIR/nas_sim_tools/build
cd $DIR/nas_sim_tools/build
eval $CMAKE_CMD
compilations \
nas_sim_tools usim \
usim $dbin/usim
compilations \
nas_sim_tools nvram \
nvram $dbin/nvram
compilations \
nas_sim_tools conf2uedata \
conf2uedata $dbin/conf2uedata
# generate USIM data
if [ -f $dbin/conf2uedata ]; then
install_nas_tools $conf_nvram_path $gen_nvram_path
else
echo_warning "not generated UE NAS files: binaries not found"
fi
else
compilations \
$oaisim_build_dir rb_tool \
rb_tool $dbin/rb_tool
# nasmesh driver compilation
compilations \
$oaisim_build_dir nasmesh \
CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
#oai_nw_drv
#compilations \
# $oaisim_build_dir oai_nw_drv \
# CMakeFiles/oai_nw_drv/oai_nw_drv.ko $dbin/oai_nw_drv.ko
fi
if [ "$TP" == "ETHERNET" ] ; then
compilations \
$oaisim_build_dir oai_eth_transpro \
liboai_eth_transpro.so $dbin/liboai_eth_transpro.so.$REL
ln -sf liboai_eth_transpro.so liboai_transpro.so
ln -sf $dbin/liboai_eth_transpro.so.$REL $dbin/liboai_transpro.so
echo_info "liboai_transpro.so is linked with ETHERNET library"
fi
cmake_file=$DIR/oaisim_mme_build_oai/CMakeLists.txt
cp $DIR/oaisim_mme_build_oai/CMakeLists.template $cmake_file
echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )" >> $cmake_file
echo "set ( XFORMS $XFORMS )" >> $cmake_file
if [ "$FLEXRAN_AGENT" = "1" ] ; then
echo "set ( FLEXRAN_AGENT_SB_IF $FLEXRAN_AGENT_SB_IF )" >> $cmake_file
fi
echo "set ( RRC_ASN1_VERSION \"${REL}\")" >> $cmake_file
echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )" >> $cmake_file
echo "set ( T_TRACER $T_TRACER )" >> $cmake_file
echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
#[ "$CLEAN" = "1" ] && rm -rf $DIR/oaisim_mme_build_oai/build
#mkdir -p $DIR/oaisim_mme_build_oai/build
#cd $DIR/oaisim_mme_build_oai/build
#eval $CMAKE_CMD
#compilations \
# oaisim_mme_build_oai oaisim_mme \
# oaisim_mme $dbin/oaisim_mme.$REL
fi
# RRH compilation
#####################
if [ "$RRH" = "1" ] ; then
rrh_exec=rrh_gw
rrh_build_dir=rrh_gw
echo_info "Compiling $rrh_exec ..."
[ "$CLEAN" = "1" ] && rm -rf $DIR/rrh_gw/build
mkdir -p $DIR/$rrh_build_dir/build
cmake_file=$DIR/$rrh_build_dir/CMakeLists.txt
echo "cmake_minimum_required(VERSION 2.8)" > $cmake_file
echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )" >> $cmake_file
echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )" >> $cmake_file
echo "set ( ENABLE_ITTI False )" >> $cmake_file
echo "set ( RF_BOARD \"${HW}\")" >> $cmake_file
echo "set ( TRANSP_PRO \"${TP}\")" >> $cmake_file
echo 'set ( PACKAGE_NAME "\"rrh_gw\"")' >> $cmake_file
echo "set ( DEADLINE_SCHEDULER \"${DEADLINE_SCHEDULER_FLAG_USER}\" )" >>$cmake_file
echo "set ( CPU_AFFINITY \"${CPU_AFFINITY_FLAG_USER}\" )" >>$cmake_file
echo "set ( T_TRACER $T_TRACER )" >> $cmake_file
echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
cd $DIR/$rrh_build_dir/build
eval $CMAKE_CMD
compilations \
rrh_gw rrh_gw \
rrh_gw $dbin/rrh_gw
fi
# Telnet server compilation
#####################
if [ "$BUILD_TELNETSRV" = "1" ] ; then
telnetsrv_build_dir=telnetsrv
mkdir -p $DIR/$telnetsrv_build_dir/build
cd $DIR/$telnetsrv_build_dir/build
echo_info "Compiling telnet server library ..."
[ "$CLEAN" = "1" ] && rm -rf $DIR/$telnetsrv_build_dir
cmake_file=$OPENAIR_DIR/common/utils/$telnetsrv_build_dir/CMakeLists.txt
cd $DIR/$telnetsrv_build_dir/build
eval "$CMAKE_CMD $OPENAIR_DIR/common/utils/$telnetsrv_build_dir/"
make
fi
# build RF device and transport protocol libraries
#####################################
if [ "$eNB" = "1" -o "$UE" = "1" -o "$RRH" = "1" ] ; then
if [ "$eNB" = "1" -o "$UE" = "1" ] ; then
build_dir=$lte_build_dir
else
build_dir=$rrh_build_dir
fi
# build RF device libraries
if [ "$HW" != "None" ] ; then
rm -f liboai_device.so
rm -f $dbin/liboai_device.so
# link liboai_device.so with the selected RF device library
if [ "$HW" == "EXMIMO" ] ; then
compilations \
$build_dir oai_exmimodevif \
liboai_exmimodevif.so $dbin/liboai_exmimodevif.so.$REL
ln -sf liboai_exmimodevif.so liboai_device.so
ln -sf $dbin/liboai_exmimodevif.so.$REL $dbin/liboai_device.so
echo_info "liboai_device.so is linked to EXMIMO device library"
elif [ "$HW" == "OAI_USRP" ] ; then
compilations \
$build_dir oai_usrpdevif \
liboai_usrpdevif.so $dbin/liboai_usrpdevif.so.$REL
ln -sf liboai_usrpdevif.so liboai_device.so
ln -sf $dbin/liboai_usrpdevif.so.$REL $dbin/liboai_device.so
echo_info "liboai_device.so is linked to USRP device library"
elif [ "$HW" == "OAI_BLADERF" ] ; then
if [ -f "/usr/include/libbladeRF.h" ] ; then
compilations \
$build_dir oai_bladerfdevif \
liboai_bladerfdevif.so $dbin/liboai_bladerfdevif.so.$REL
fi
ln -sf liboai_bladerfdevif.so liboai_device.so
ln -sf $dbin/liboai_bladerfdevif.so.$REL $dbin/liboai_device.so
echo_info "liboai_device.so is linked to BLADERF device library"
elif [ "$HW" == "OAI_LMSSDR" ] ; then
# if [ -f "/usr/include/libbladeRF.h" ] ; then
compilations \
$build_dir oai_lmssdrdevif \
liboai_lmssdrdevif.so $dbin/liboai_lmssdrdevif.so.$REL
# fi
ln -sf liboai_lmssdrdevif.so liboai_device.so
ln -sf $dbin/liboai_lmssdrdevif.so.$REL $dbin/liboai_device.so
echo_info "liboai_device.so is linked to LMSSDR device library"
else
echo_info "liboai_device.so is not linked to any device library"
fi
fi
# build trasport protocol libraries (currently only ETHERNET is available)
if [ "$TP" != "None" ] ; then
rm -f liboai_transpro.so
rm -f $dbin/liboai_transpro.so
if [ "$TP" == "ETHERNET" ] ; then
compilations \
$build_dir oai_eth_transpro \
liboai_eth_transpro.so $dbin/liboai_eth_transpro.so.$REL
ln -sf liboai_eth_transpro.so liboai_transpro.so
ln -sf $dbin/liboai_eth_transpro.so.$REL $dbin/liboai_transpro.so
echo_info "liboai_transpro.so is linked with ETHERNET library"
fi
fi
fi
# Doxygen Support
#####################
if [ "$BUILD_DOXYGEN" = "1" ] ;then
doxygen_log=$OPENAIR_DIR/cmake_targets/log/doxygen.log
echo_info "Building doxygen based documentation. The documentation file is located here: $OPENAIR_DIR/targets/DOCS/html/index.html"
echo_info "Doxygen Generation log is located here: $doxygen_log"
echo_info "Generating doxygen files....please wait"
(
[ "$CLEAN" = "1" ] && rm -rf $OPENAIR_DIR/cmake_targets/doxygen/build
mkdir -p $OPENAIR_DIR/cmake_targets/doxygen/build
cd $OPENAIR_DIR/cmake_targets/doxygen/build
eval $CMAKE_CMD
make doc
) >& $doxygen_log
fi
# Auto-tests
#####################
if [ "$OAI_TEST" = "1" ]; then
echo_info "10. Running OAI pre commit tests (pre-ci) ..."
echo_error "These scripts ASSUME that user is in /etc/sudoers and can execute commands without PASSWORD prompt"
echo_error "Add the following lines in /etc/sudoers file to make your __user_name__ sudo without password prompt"
echo_error " __your_user_name__ ALL = (ALL:ALL) NOPASSWD: ALL"
echo_error " __your_user_name__ ALL = (ALL) NOPASSWD: ALL "
echo_info "The log file for the autotest script for debugging is located here: $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log "
echo_info "The results of autotests results is located here: $OPENAIR_DIR/cmake_targets/autotests/log/results_autotests.xml "
echo_info "You can hit CTRL-C any time to terminate the autotests..."
echo "Current User Name: $USER"
read -s -p "Enter Password: " mypassword
echo -e "\n"
rm -fr $OPENAIR_DIR/cmake_targets/autotests/log
mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log
if [ "$RUN_GROUP" -eq "1" ]; then
$OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" -p $mypassword >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
else
$OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -p $mypassword >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
fi
wait
else
echo_info "10. Bypassing the Tests ..."
fi
}
main "$@"
Reference in New Issue View Git Blame Copy Permalink