maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
7c146154f5e7eed5be34a2bc3d47f92f1db9baae
openairinterface5g/executables/nr-softmodem-common.h
T
Sakthivel Velumani ca93e68410 Use command line option for sell search 
There is already a command line option called 'ue-scan-carrier' which
seemed to blindly look for SSB by changing the center frequency by
+/-100Hz if the previous attempt failed. This is probably copied from
LTE and is not suitable for NR. This commit uses this option to either
1. Perform initial sync on one GSCN if the SSB position if known
2. Or scan the all GSCN (if the SSB postion is unknown)

Also, the following is done for re-synchronization
1. Scan all GSCN when UE comes back from IDLE state
2. Scan one GSCN when UE does re-estabishment

Removed dependency of lte-softmodem.h in nr-softmodem.c.
CONFIG_HLP_UESCAN is declared also in lte-softmodem.h.
2024-05-30 10:20:55 -04:00

156 lines
8.4 KiB
C
Raw Blame History

#ifndef NR_SOFTMODEM_COMMON_H
#define NR_SOFTMODEM_COMMON_H
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <execinfo.h>
#include <fcntl.h>
#include <getopt.h>
#include <linux/sched.h>
#include <sched.h>
#include <signal.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <syscall.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/sysinfo.h>
#include <sys/types.h>
#include <unistd.h>
#include <sys/sysinfo.h>
#include "radio/COMMON/common_lib.h"
#undef MALLOC
#include "assertions.h"
#include "PHY/types.h"
#include <threadPool/thread-pool.h>
#include "s1ap_eNB.h"
#include "SIMULATION/ETH_TRANSPORT/proto.h"
/* help strings definition for command line options, used in CMDLINE_XXX_DESC macros and printed when -h option is used */
#define CONFIG_HLP_RFCFGF "Configuration file for front-end (e.g. LMS7002M)\n"
#define CONFIG_HLP_ULMAXE "set the eNodeB max ULSCH erros\n"
#define CONFIG_HLP_CALUER "set UE RX calibration\n"
#define CONFIG_HLP_CALUERM ""
#define CONFIG_HLP_CALUERB ""
#define CONFIG_HLP_DBGUEPR "UE run normal prach power ramping, but don't continue random-access\n"
#define CONFIG_HLP_CALPRACH "UE run normal prach with maximum power, but don't continue random-access\n"
#define CONFIG_HLP_NOL2CN "bypass L2 and upper layers\n"
#define CONFIG_HLP_UERXG "set UE RX gain\n"
#define CONFIG_HLP_UERXGOFF "external UE amplifier offset\n"
#define CONFIG_HLP_UETXG "set UE TX gain\n"
#define CONFIG_HLP_UENANTR "set UE number of rx antennas\n"
#define CONFIG_HLP_UENANTT "set UE number of tx antennas\n"
#define CONFIG_HLP_UESCAN "set UE to scan all possible GSCN in current bandwidth\n"
#define CONFIG_HLP_UEFO "set UE to enable estimation and compensation of frequency offset\n"
#define CONFIG_HLP_DUMPFRAME "dump UE received frame to rxsig_frame0.dat and exit\n"
#define CONFIG_HLP_DLSHIFT "dynamic shift for LLR compuation for TM3/4 (default 0)\n"
#define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n"
#define CONFIG_HLP_DORA "test gNB and UE with RA procedures\n"
#define CONFIG_HLP_DMAMAP "use DMA memory mapping\n"
#define CONFIG_HLP_EXCCLK "tells hardware to use a clock reference (0:internal(default), 1:external, 2:gpsdo)\n"
#define CONFIG_HLP_USIM "use XOR autentication algo in case of test usim mode\n"
#define CONFIG_HLP_NOSNGLT "Disables single-thread mode in lte-softmodem\n"
#define CONFIG_HLP_DLF "Set the downlink frequency for all component carriers\n"
#define CONFIG_HLP_ULOFF "Set the uplink frequnecy offset for all component carriers\n"
#define CONFIG_HLP_CHOFF "Channel id offset\n"
#define CONFIG_HLP_SOFTS "Enable soft scope and L1 and L2 stats (Xforms)\n"
#define CONFIG_HLP_ITTIL "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n"
#define CONFIG_HLP_DLMCS_PHYTEST "Set the downlink MCS for PHYTEST mode\n"
#define CONFIG_HLP_DLNL_PHYTEST "Set the downlink nrOfLayers for PHYTEST mode\n"
#define CONFIG_HLP_ULNL_PHYTEST "Set the uplink nrOfLayers for PHYTEST mode\n"
#define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n"
#define CONFIG_HLP_MSLOTS "Skip the missed slots/subframes \n"
#define CONFIG_HLP_ULMCS_PHYTEST "Set the uplink MCS for PHYTEST mode\n"
#define CONFIG_HLP_DLBW_PHYTEST "Set the number of PRBs used for DLSCH in PHYTEST mode\n"
#define CONFIG_HLP_ULBW_PHYTEST "Set the number of PRBs used for ULSCH in PHYTEST mode\n"
#define CONFIG_HLP_PRB_SA "Set the number of PRBs for SA\n"
#define CONFIG_HLP_DLBM_PHYTEST "Bitmap for DLSCH slots (slot 0 starts at LSB)\n"
#define CONFIG_HLP_ULBM_PHYTEST "Bitmap for ULSCH slots (slot 0 starts at LSB)\n"
#define CONFIG_HLP_SSC "Set the start subcarrier \n"
#define CONFIG_HLP_TDD "Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n"
#define CONFIG_HLP_UE "Set the lte softmodem as a UE\n"
#define CONFIG_HLP_L2MONW "Enable L2 wireshark messages on localhost \n"
#define CONFIG_HLP_L2MONP "Enable L2 pcap messages on localhost \n"
#define CONFIG_HLP_MAC "Disable the MAC procedures at UE side (default is enabled)\n"
#define CONFIG_HLP_VCD "Enable VCD (generated file will is named openair_dump_eNB.vcd, read it with target/RT/USER/eNB.gtkw\n"
#define CONFIG_HLP_TPORT "tracer port\n"
#define CONFIG_HLP_NOTWAIT "don't wait for tracer, start immediately\n"
#define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_DISABLETIMECORR "disable UE timing correction\n"
#define CONFIG_HLP_RRC_CFG_PATH "path for RRC configuration\n"
#define CONFIG_HLP_RE_CFG_FILE "filename for reconfig.raw in phy-test mode\n"
#define CONFIG_HLP_RB_CFG_FILE "filename for rbconfig.raw in phy-test mode\n"
#define CONFIG_HLP_UECAP_FILE "path for UE Capabilities file\n"
#define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n"
#define CONFIG_HLP_EMULATE_RF "Emulated RF enabled(disable by defult)\n"
#define CONFIG_HLP_PARALLEL_CMD "three config for level of parallelism 'PARALLEL_SINGLE_THREAD', 'PARALLEL_RU_L1_SPLIT', or 'PARALLEL_RU_L1_TRX_SPLIT'\n"
#define CONFIG_HLP_WORKER_CMD "two option for worker 'WORKER_DISABLE' or 'WORKER_ENABLE'\n"
#define CONFIG_HLP_USRP_THREAD "having extra thead for usrp tx\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_USRP_ARGS "set the arguments to identify USRP (same syntax as in UHD)\n"
#define CONFIG_HLP_TX_SUBDEV "set the arguments to select tx_subdev (same syntax as in UHD)\n"
#define CONFIG_HLP_RX_SUBDEV "set the arguments to select rx_subdev (same syntax as in UHD)\n"
#define CONFIG_HLP_FLOG "Enable online log \n"
#define CONFIG_HLP_LOGL "Set the global log level, valid options: (4:trace, 3:debug, 2:info, 1:warn, (0:error))\n"
#define CONFIG_HLP_LOGV "Set the global log verbosity \n"
#define CONFIG_HLP_TELN "Start embedded telnet server \n"
#define CONFIG_HLP_SNR "Set average SNR in dB (for --siml1 option)\n"
#define CONFIG_HLP_NOS1 "Disable s1 interface\n"
#define CONFIG_HLP_NOKRNMOD "(noS1 only): Use tun instead of namesh module \n"
/*--------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters for LOG utility */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*--------------------------------------------------------------------------------------------------------------------------------*/
#define CMDLINE_LOGPARAMS_DESC_NR { \
{"R" , CONFIG_HLP_FLOG, 0, uptr:&online_log_messages, defintval:1, TYPE_INT, 0}, \
{"g" , CONFIG_HLP_LOGL, 0, uptr:&glog_level, defintval:0, TYPE_UINT, 0}, \
{"G" , CONFIG_HLP_LOGV, 0, uptr:&glog_verbosity, defintval:0, TYPE_UINT16, 0}, \
{"telnetsrv", CONFIG_HLP_TELN, PARAMFLAG_BOOL, uptr:&start_telnetsrv, defintval:0, TYPE_UINT, 0}, \
}
#define CMDLINE_ONLINELOG_IDX 0
#define CMDLINE_GLOGLEVEL_IDX 1
#define CMDLINE_GLOGVERBO_IDX 2
#define CMDLINE_STARTTELN_IDX 3
/***************************************************************************************************************************************/
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern uint64_t downlink_frequency[MAX_NUM_CCs][4];
extern int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
extern int rx_input_level_dBm;
extern uint64_t num_missed_slots; // counter for the number of missed slots
extern int oaisim_flag;
extern int oai_exit;
extern openair0_config_t openair0_cfg[MAX_CARDS];
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern int transmission_mode;
extern double cpuf;
extern int emulate_rf;
extern int numerology;
extern int usrp_tx_thread;
void wait_gNBs(void);
#endif
Reference in New Issue View Git Blame Copy Permalink