Robert Schmidt
9a44d4b88f
The original UL max MCS of 9 was chosen for performance reasons. In the meantime, machines became faster, and the ULSCH decoding faster. Improve UL max MCS to be 28 by default to use the complete range of possible MCS.
264 lines
9.0 KiB
Plaintext
264 lines
9.0 KiB
Plaintext
Active_gNBs = ( "gNB-OAI");
|
|
# Asn1_verbosity, choice in: none, info, annoying
|
|
Asn1_verbosity = "none";
|
|
|
|
sa = 1;
|
|
|
|
gNBs =
|
|
(
|
|
{
|
|
////////// Identification parameters:
|
|
gNB_ID = 0xe00;
|
|
gNB_name = "gNB-OAI";
|
|
|
|
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
|
tracking_area_code = 1;
|
|
plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1; }) });
|
|
|
|
nr_cellid = 12345678L;
|
|
|
|
////////// Physical parameters:
|
|
|
|
do_CSIRS = 1;
|
|
do_SRS = 1;
|
|
|
|
servingCellConfigCommon = (
|
|
{
|
|
#spCellConfigCommon
|
|
|
|
physCellId = 0;
|
|
|
|
# downlinkConfigCommon
|
|
#frequencyInfoDL
|
|
# this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
|
|
absoluteFrequencySSB = 423130;
|
|
dl_frequencyBand = 1;
|
|
# this is 3600 MHz
|
|
dl_absoluteFrequencyPointA = 422194;
|
|
#scs-SpecificCarrierList
|
|
dl_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
dl_subcarrierSpacing = 0;
|
|
dl_carrierBandwidth = 52;
|
|
#initialDownlinkBWP
|
|
#genericParameters
|
|
# this is RBstart=27,L=48 (275*(L-1))+RBstart
|
|
initialDLBWPlocationAndBandwidth = 14025;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialDLBWPsubcarrierSpacing = 0;
|
|
#pdcch-ConfigCommon
|
|
initialDLBWPcontrolResourceSetZero = 7;
|
|
initialDLBWPsearchSpaceZero = 0;
|
|
|
|
#uplinkConfigCommon
|
|
#frequencyInfoUL
|
|
ul_frequencyBand = 1;
|
|
ul_absoluteFrequencyPointA = 384194;
|
|
#scs-SpecificCarrierList
|
|
ul_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
ul_subcarrierSpacing = 0;
|
|
ul_carrierBandwidth = 52;
|
|
pMax = 20;
|
|
#initialUplinkBWP
|
|
#genericParameters
|
|
initialULBWPlocationAndBandwidth = 14025;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialULBWPsubcarrierSpacing = 0;
|
|
#rach-ConfigCommon
|
|
#rach-ConfigGeneric
|
|
prach_ConfigurationIndex = 98;
|
|
#prach_msg1_FDM
|
|
#0 = one, 1=two, 2=four, 3=eight
|
|
prach_msg1_FDM = 0;
|
|
prach_msg1_FrequencyStart = 0;
|
|
zeroCorrelationZoneConfig = 12;
|
|
preambleReceivedTargetPower = -90;
|
|
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
|
|
preambleTransMax = 6;
|
|
#powerRampingStep
|
|
# 0=dB0,1=dB2,2=dB4,3=dB6
|
|
powerRampingStep = 1;
|
|
#ra_ReponseWindow
|
|
#1,2,4,8,10,20,40,80
|
|
ra_ResponseWindow = 4;
|
|
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
|
|
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
|
|
#oneHalf (0..15) 4,8,12,16,...60,64
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
|
|
#ra_ContentionResolutionTimer
|
|
#(0..7) 8,16,24,32,40,48,56,64
|
|
ra_ContentionResolutionTimer = 7;
|
|
rsrp_ThresholdSSB = 19;
|
|
#prach-RootSequenceIndex_PR
|
|
#1 = 839, 2 = 139
|
|
prach_RootSequenceIndex_PR = 2;
|
|
prach_RootSequenceIndex = 1;
|
|
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
|
|
#
|
|
msg1_SubcarrierSpacing = 0;
|
|
# restrictedSetConfig
|
|
# 0=unrestricted, 1=restricted type A, 2=restricted type B
|
|
restrictedSetConfig = 0;
|
|
|
|
msg3_DeltaPreamble = 1;
|
|
p0_NominalWithGrant =-90;
|
|
|
|
# pucch-ConfigCommon setup :
|
|
# pucchGroupHopping
|
|
# 0 = neither, 1= group hopping, 2=sequence hopping
|
|
pucchGroupHopping = 0;
|
|
hoppingId = 40;
|
|
p0_nominal = -70;
|
|
n_TimingAdvanceOffset = 0;
|
|
|
|
# ssb_PositionsInBurs_BitmapPR
|
|
# 1=short, 2=medium, 3=long
|
|
ssb_PositionsInBurst_PR = 2;
|
|
ssb_PositionsInBurst_Bitmap = 1;
|
|
|
|
# ssb_periodicityServingCell
|
|
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
|
|
ssb_periodicityServingCell = 2;
|
|
|
|
# dmrs_TypeA_position
|
|
# 0 = pos2, 1 = pos3
|
|
dmrs_TypeA_Position = 0;
|
|
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
subcarrierSpacing = 0;
|
|
|
|
|
|
#tdd-UL-DL-ConfigurationCommon
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
referenceSubcarrierSpacing = 0;
|
|
# pattern1
|
|
|
|
ssPBCH_BlockPower = -25;
|
|
}
|
|
|
|
);
|
|
|
|
|
|
# ------- SCTP definitions
|
|
SCTP :
|
|
{
|
|
# Number of streams to use in input/output
|
|
SCTP_INSTREAMS = 2;
|
|
SCTP_OUTSTREAMS = 2;
|
|
};
|
|
|
|
|
|
////////// AMF parameters:
|
|
amf_ip_address = ( { ipv4 = "192.168.70.132";
|
|
ipv6 = "192:168:30::17";
|
|
active = "yes";
|
|
preference = "ipv4";
|
|
}
|
|
);
|
|
|
|
|
|
NETWORK_INTERFACES :
|
|
{
|
|
GNB_INTERFACE_NAME_FOR_NG_AMF = "demo-oai";
|
|
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.70.129/24";
|
|
GNB_INTERFACE_NAME_FOR_NGU = "demo-oai";
|
|
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.70.129/24";
|
|
GNB_PORT_FOR_S1U = 2152; # Spec 2152
|
|
};
|
|
|
|
}
|
|
);
|
|
|
|
MACRLCs = (
|
|
{
|
|
num_cc = 1;
|
|
tr_s_preference = "local_L1";
|
|
tr_n_preference = "local_RRC";
|
|
pusch_TargetSNRx10 = 200;
|
|
pucch_TargetSNRx10 = 200;
|
|
}
|
|
);
|
|
|
|
L1s = (
|
|
{
|
|
num_cc = 1;
|
|
tr_n_preference = "local_mac";
|
|
prach_dtx_threshold = 120;
|
|
pucch0_dtx_threshold = 100;
|
|
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
|
|
}
|
|
);
|
|
|
|
RUs = (
|
|
{
|
|
local_rf = "yes"
|
|
nb_tx = 1
|
|
nb_rx = 1
|
|
att_tx = 10;
|
|
att_rx = 10;
|
|
bands = [1];
|
|
max_pdschReferenceSignalPower = -27;
|
|
max_rxgain = 114;
|
|
eNB_instances = [0];
|
|
#beamforming 1x4 matrix:
|
|
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
|
|
clock_src = "internal";
|
|
}
|
|
);
|
|
|
|
THREAD_STRUCT = (
|
|
{
|
|
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
|
|
parallel_config = "PARALLEL_SINGLE_THREAD";
|
|
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
|
|
worker_config = "WORKER_ENABLE";
|
|
}
|
|
);
|
|
|
|
rfsimulator :
|
|
{
|
|
serveraddr = "server";
|
|
serverport = 4043;
|
|
options = (); #("saviq"); or/and "chanmod"
|
|
modelname = "AWGN";
|
|
IQfile = "/tmp/rfsimulator.iqs";
|
|
};
|
|
|
|
security = {
|
|
# preferred ciphering algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nea0, nea1, nea2, nea3
|
|
ciphering_algorithms = ( "nea0" );
|
|
|
|
# preferred integrity algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nia0, nia1, nia2, nia3
|
|
integrity_algorithms = ( "nia2", "nia0" );
|
|
|
|
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
|
|
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
|
|
drb_ciphering = "yes";
|
|
drb_integrity = "no";
|
|
};
|
|
|
|
log_config :
|
|
{
|
|
global_log_level ="info";
|
|
hw_log_level ="info";
|
|
phy_log_level ="info";
|
|
mac_log_level ="info";
|
|
rlc_log_level ="info";
|
|
pdcp_log_level ="info";
|
|
rrc_log_level ="info";
|
|
ngap_log_level ="debug";
|
|
f1ap_log_level ="debug";
|
|
};
|