Robert Schmidt
9a44d4b88f
The original UL max MCS of 9 was chosen for performance reasons. In the meantime, machines became faster, and the ULSCH decoding faster. Improve UL max MCS to be 28 by default to use the complete range of possible MCS.
300 lines
10 KiB
Plaintext
300 lines
10 KiB
Plaintext
Active_gNBs = ( "gNB-OAI");
|
|
# Asn1_verbosity, choice in: none, info, annoying
|
|
Asn1_verbosity = "none";
|
|
|
|
gNBs =
|
|
(
|
|
{
|
|
////////// Identification parameters:
|
|
gNB_ID = 0xe00;
|
|
gNB_name = "gNB-OAI";
|
|
|
|
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
|
tracking_area_code = 1;
|
|
plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ( { sst = 1; }); });
|
|
|
|
nr_cellid = 1;
|
|
|
|
////////// Physical parameters:
|
|
|
|
pdsch_AntennaPorts_XP = 2;
|
|
pusch_AntennaPorts = 2;
|
|
do_CSIRS = 1;
|
|
do_SRS = 0 ;
|
|
sib1_tda = 15;
|
|
|
|
pdcch_ConfigSIB1 = (
|
|
{
|
|
controlResourceSetZero = 11;
|
|
searchSpaceZero = 0;
|
|
}
|
|
);
|
|
|
|
servingCellConfigCommon = (
|
|
{
|
|
#spCellConfigCommon
|
|
|
|
physCellId = 0;
|
|
# n_TimingAdvanceOffset = 0;
|
|
# downlinkConfigCommon
|
|
#frequencyInfoDL
|
|
# this is 3450.72 MHz (center frequency)
|
|
absoluteFrequencySSB = 630048;
|
|
dl_frequencyBand = 78;
|
|
# this is 3401.58 MHz
|
|
dl_absoluteFrequencyPointA = 626772;
|
|
#scs-SpecificCarrierList
|
|
dl_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
dl_subcarrierSpacing = 1;
|
|
dl_carrierBandwidth = 273;
|
|
#initialDownlinkBWP
|
|
#genericParameters
|
|
initialDLBWPlocationAndBandwidth = 1099; #38.101-1 Table 5.3.2-1
|
|
#
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialDLBWPsubcarrierSpacing = 1;
|
|
#pdcch-ConfigCommon
|
|
initialDLBWPcontrolResourceSetZero = 11;
|
|
initialDLBWPsearchSpaceZero = 0;
|
|
|
|
#uplinkConfigCommon
|
|
#frequencyInfoUL
|
|
ul_frequencyBand = 78;
|
|
#scs-SpecificCarrierList
|
|
ul_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
ul_subcarrierSpacing = 1;
|
|
ul_carrierBandwidth = 273;
|
|
pMax = 23;
|
|
#initialUplinkBWP
|
|
#genericParameters
|
|
initialULBWPlocationAndBandwidth = 1099;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialULBWPsubcarrierSpacing = 1;
|
|
#rach-ConfigCommon
|
|
#rach-ConfigGeneric
|
|
prach_ConfigurationIndex = 151;
|
|
#prach_msg1_FDM
|
|
#0 = one, 1=two, 2=four, 3=eight
|
|
prach_msg1_FDM = 0;
|
|
prach_msg1_FrequencyStart = 0;
|
|
zeroCorrelationZoneConfig = 0;
|
|
preambleReceivedTargetPower = -100;
|
|
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
|
|
preambleTransMax = 7;
|
|
#powerRampingStep
|
|
# 0=dB0,1=dB2,2=dB4,3=dB6
|
|
powerRampingStep = 3;
|
|
#ra_ReponseWindow
|
|
#1,2,4,8,10,20,40,80
|
|
ra_ResponseWindow = 5;
|
|
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
|
|
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
|
|
#oneHalf (0..15) 4,8,12,16,...60,64
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
|
|
#ra_ContentionResolutionTimer
|
|
#(0..7) 8,16,24,32,40,48,56,64
|
|
ra_ContentionResolutionTimer = 7;
|
|
rsrp_ThresholdSSB = 19;
|
|
#prach-RootSequenceIndex_PR
|
|
#1 = 839, 2 = 139
|
|
prach_RootSequenceIndex_PR = 2;
|
|
prach_RootSequenceIndex = 1;
|
|
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
|
|
#
|
|
msg1_SubcarrierSpacing = 1,
|
|
# restrictedSetConfig
|
|
# 0=unrestricted, 1=restricted type A, 2=restricted type B
|
|
restrictedSetConfig = 0,
|
|
|
|
# this is the offset between the last PRACH preamble power and the Msg3 PUSCH, 2 times the field value in dB
|
|
msg3_DeltaPreamble = 2;
|
|
p0_NominalWithGrant = -96;
|
|
|
|
# pucch-ConfigCommon setup :
|
|
# pucchGroupHopping
|
|
# 0 = neither, 1= group hopping, 2=sequence hopping
|
|
pucchGroupHopping = 0;
|
|
hoppingId = 0;
|
|
p0_nominal = -96;
|
|
# ssb_PositionsInBurs_BitmapPR
|
|
# 1=short, 2=medium, 3=long
|
|
ssb_PositionsInBurst_PR = 2;
|
|
ssb_PositionsInBurst_Bitmap = 0x1;
|
|
|
|
# ssb_periodicityServingCell
|
|
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
|
|
ssb_periodicityServingCell = 2;
|
|
|
|
# dmrs_TypeA_position
|
|
# 0 = pos2, 1 = pos3
|
|
dmrs_TypeA_Position = 0;
|
|
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
subcarrierSpacing = 1;
|
|
|
|
|
|
#tdd-UL-DL-ConfigurationCommon
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
referenceSubcarrierSpacing = 1;
|
|
# pattern1
|
|
# dl_UL_TransmissionPeriodicity
|
|
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
|
|
dl_UL_TransmissionPeriodicity = 6;
|
|
nrofDownlinkSlots = 7;
|
|
nrofDownlinkSymbols = 6;
|
|
nrofUplinkSlots = 2;
|
|
nrofUplinkSymbols = 4;
|
|
|
|
ssPBCH_BlockPower = 10;
|
|
}
|
|
|
|
);
|
|
|
|
|
|
# ------- SCTP definitions
|
|
SCTP :
|
|
{
|
|
# Number of streams to use in input/output
|
|
SCTP_INSTREAMS = 2;
|
|
SCTP_OUTSTREAMS = 2;
|
|
};
|
|
|
|
|
|
////////// AMF parameters:
|
|
amf_ip_address = ( { ipv4 = "172.21.6.5";
|
|
ipv6 = "192:168:30::17";
|
|
active = "yes";
|
|
preference = "ipv4";
|
|
}
|
|
);
|
|
|
|
NETWORK_INTERFACES :
|
|
{
|
|
GNB_INTERFACE_NAME_FOR_NG_AMF = "eno8303";
|
|
GNB_IPV4_ADDRESS_FOR_NG_AMF = "172.21.16.108/22";
|
|
GNB_INTERFACE_NAME_FOR_NGU = "eno8303";
|
|
GNB_IPV4_ADDRESS_FOR_NGU = "172.21.16.108/22";
|
|
GNB_PORT_FOR_S1U = 2152; # Spec 2152
|
|
};
|
|
}
|
|
);
|
|
|
|
MACRLCs = (
|
|
{
|
|
num_cc = 1;
|
|
tr_s_preference = "local_L1";
|
|
tr_n_preference = "local_RRC";
|
|
pusch_TargetSNRx10 = 300;
|
|
pucch_TargetSNRx10 = 230;
|
|
dl_bler_target_upper=.35;
|
|
dl_bler_target_lower=.15;
|
|
ul_bler_target_upper=.35;
|
|
ul_bler_target_lower=.15;
|
|
pusch_FailureThres = 100;
|
|
}
|
|
);
|
|
|
|
L1s = (
|
|
{
|
|
num_cc = 1;
|
|
tr_n_preference = "local_mac";
|
|
prach_dtx_threshold = 100;
|
|
pucch0_dtx_threshold = 80;
|
|
pusch_dtx_threshold = 10;
|
|
tx_amp_backoff_dB = 20; # needs to match O-RU configuration
|
|
L1_rx_thread_core = 8;
|
|
L1_tx_thread_core = 10;
|
|
phase_compensation = 0; # needs to match O-RU configuration
|
|
}
|
|
);
|
|
|
|
RUs = (
|
|
{
|
|
local_rf = "no";
|
|
nb_tx = 4;
|
|
nb_rx = 2;
|
|
att_tx = 0
|
|
att_rx = 0;
|
|
bands = [78];
|
|
max_pdschReferenceSignalPower = -27;
|
|
max_rxgain = 75;
|
|
sf_extension = 0;
|
|
eNB_instances = [0];
|
|
ru_thread_core = 6;
|
|
sl_ahead = 10;
|
|
##beamforming 1x2 matrix: 1 layer x 2 antennas
|
|
bf_weights = [0x00007fff, 0x0000,0x00007fff, 0x0000];
|
|
tr_preference = "raw_if4p5"; # important: activate FHI7.2
|
|
do_precoding = 0; # needs to match O-RU configuration
|
|
}
|
|
);
|
|
|
|
security = {
|
|
# preferred ciphering algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nea0, nea1, nea2, nea3
|
|
ciphering_algorithms = ( "nea0" );
|
|
|
|
# preferred integrity algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nia0, nia1, nia2, nia3
|
|
integrity_algorithms = ( "nia2", "nia0" );
|
|
|
|
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
|
|
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
|
|
drb_ciphering = "yes";
|
|
drb_integrity = "no";
|
|
};
|
|
|
|
log_config :
|
|
{
|
|
global_log_level ="info";
|
|
hw_log_level ="info";
|
|
phy_log_level ="info";
|
|
mac_log_level ="info";
|
|
rlc_log_level ="info";
|
|
pdcp_log_level ="info";
|
|
rrc_log_level ="info";
|
|
ngap_log_level ="info";
|
|
f1ap_log_level ="info";
|
|
};
|
|
|
|
fhi_72 = {
|
|
dpdk_devices = ("0000:31:06.0", "0000:31:06.1");
|
|
system_core = 0;
|
|
io_core = 4;
|
|
worker_cores = (2);
|
|
du_addr = ("00:11:22:33:44:66", "00:11:22:33:44:67");
|
|
ru_addr = ("70:b3:d5:e1:5b:ff", "70:b3:d5:e1:5b:ff");
|
|
mtu = 9216;
|
|
file_prefix = "fhi_72";
|
|
fh_config = ({
|
|
Tadv_cp_dl = 25;
|
|
T2a_cp_dl = (285, 429);
|
|
T2a_cp_ul = (285, 429);
|
|
T2a_up = (134, 1087);
|
|
Ta3 = (152, 160);
|
|
T1a_cp_dl = (258, 392);
|
|
T1a_cp_ul = (285, 300);
|
|
T1a_up = (155, 300);
|
|
Ta4 = (0, 200);
|
|
ru_config = {
|
|
iq_width = 9;
|
|
iq_width_prach = 9;
|
|
fft_size = 12;
|
|
};
|
|
prach_config = {
|
|
eAxC_offset = 4;
|
|
};
|
|
});
|
|
};
|