Javier Morgade
3fbaf01eb3
ACKNOWLEDGEMENT: 1. This commit was developed at Vicomtech (https://www.vicomtech.org) under UE project CDN-X-ALL: "CDN edge-cloud computing for efficient cache and reliable streaming aCROSS Aggregated unicast-multicast LinkS" 2. Project funded by Fed4FIRE+ OC5 (https://www.fed4fire.eu) Signed-off-by: Javier Morgade <javier.morgade@ieee.org>
187 lines
7.4 KiB
C
187 lines
7.4 KiB
C
/*
|
|
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
* this work for additional information regarding copyright ownership.
|
|
* The OpenAirInterface Software Alliance licenses this file to You under
|
|
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
|
|
* except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.openairinterface.org/?page_id=698
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*-------------------------------------------------------------------------------
|
|
* For more information about the OpenAirInterface (OAI) Software Alliance:
|
|
* contact@openairinterface.org
|
|
*/
|
|
|
|
/*! \file nas_config.h
|
|
* \brief Configures the nasmesh interface
|
|
* \author Daniel Camara and navid nikaein
|
|
* \date 2006-2011
|
|
* \version 0.1
|
|
* \company Eurecom
|
|
*/
|
|
#ifndef NAS_CONFIG_H_
|
|
#define NAS_CONFIG_H_
|
|
|
|
#include <netinet/in.h>
|
|
|
|
/*! \fn void void nas_getparams(void)(void)
|
|
* \brief This function get parameters used to configure network interface when running in noS1 mode
|
|
* \note
|
|
* @ingroup ?????
|
|
*/
|
|
void nas_getparams(void);
|
|
|
|
/*! \fn int NAS_config(char*, char*, char*, char*)
|
|
* \brief This function initializes the nasmesh interface
|
|
* \param[in] interfaceName, the name of the interface, e.g. nasmesh0 or nasmesh1
|
|
* \param[in] ipAddress, the address of the interface, e.g. 10.0.1.1
|
|
* \param[in] networkMask, the network mask to be used, e.g. 255.255.255.0
|
|
* \param[in] broadcastAddress, the broadcast address for the subnet, e.g. 10.0.1.255
|
|
* \return 0 on success, otherwise 1, if couldn't open a socket and 2 if the ioctl fails
|
|
* \note
|
|
* @ingroup ?????
|
|
*/
|
|
int NAS_config(char *interfaceName, char *ipAddress, char *networkMask, char *broadcastAddress);
|
|
|
|
/*! \fn int nas_config(char*, int, int)
|
|
* \brief This function initializes the nasmesh interface using the basic values,
|
|
* basic address, network mask and broadcast address, as the default configured
|
|
* ones
|
|
* \param[in] interfaceName, the name of the interface, e.g. nasmesh0 or nasmesh1
|
|
* \param[in] third octet of the ip address e.g. for the 10.1.2.3 address would be 2
|
|
* \param[in] fourth octet of the ip address e.g. for the 10.1.2.3 address would be 3
|
|
* \return 0 on success, otherwise 1, if couldn't open a socket and 2 if the ioctl fails
|
|
* \note
|
|
* @ingroup ?????
|
|
*/
|
|
int nas_config(int interface_id, int thirdOctet, int fourthOctet, char *ifsuffix);
|
|
|
|
/*! \fn int nas_config_mbms(char*, int, int)
|
|
* \brief This function initializes the nasmesh interface using the basic values,
|
|
* basic address, network mask and broadcast address, as the default configured
|
|
* ones
|
|
* \param[in] interfaceName, the name of the interface, e.g. nasmesh0 or nasmesh1
|
|
* \param[in] third octet of the ip address e.g. for the 10.1.2.3 address would be 2
|
|
* \param[in] fourth octet of the ip address e.g. for the 10.1.2.3 address would be 3
|
|
* \return 0 on success, otherwise 1, if couldn't open a socket and 2 if the ioctl fails
|
|
* \note
|
|
* @ingroup ?????
|
|
*/
|
|
int nas_config_mbms(int interface_id, int thirdOctet, int fourthOctet, char *ifsuffix);
|
|
|
|
/*! \fn int nas_config_mbms_s1(char*, int, int)
|
|
* \brief This function initializes the nasmesh interface using the basic values,
|
|
* basic address, network mask and broadcast address, as the default configured
|
|
* ones
|
|
* \param[in] interfaceName, the name of the interface, e.g. nasmesh0 or nasmesh1
|
|
* \param[in] third octet of the ip address e.g. for the 10.1.2.3 address would be 2
|
|
* \param[in] fourth octet of the ip address e.g. for the 10.1.2.3 address would be 3
|
|
* \return 0 on success, otherwise 1, if couldn't open a socket and 2 if the ioctl fails
|
|
* \note
|
|
* @ingroup ?????
|
|
*/
|
|
int nas_config_mbms_s1(int interface_id, int thirdOctet, int fourthOctet, char *ifsuffix);
|
|
|
|
|
|
|
|
/*! \fn int blocking_NAS_config(char*, char*, char*, char*)
|
|
* \brief This function initializes the nasmesh interface, in a blocking way,
|
|
* the system calls are interrupted
|
|
* \param[in] interfaceName, the name of the interface, e.g. nasmesh0 or nasmesh1
|
|
* \param[in] ipAddress, the address of the interface, e.g. 10.0.1.1
|
|
* \param[in] networkMask, the network mask to be used, e.g. 255.255.255.0
|
|
* \param[in] broadcastAddress, the broadcast address for the subnet, e.g. 10.0.1.255
|
|
* \return 0 on success, otherwise 1
|
|
* \note
|
|
* @ingroup ?????
|
|
*/
|
|
int blocking_NAS_config(char *interfaceName, char *ipAddress, char *networkMask, char *broadcastAddress);
|
|
|
|
/*! \fn int setInterfaceParameter(char*, char*, int)
|
|
* \brief This function sets an genneric interface parameter (SIOCSIFADDR,
|
|
* SIOCSIFNETMASK, SIOCSIFBRDADDR, SIOCSIFFLAGS)
|
|
* \param[in] interfaceName, the name of the interface, e.g. nasmesh0 or nasmesh1
|
|
* \param[in] address, the value of the parameter to set, e.g. 10.0.1.255
|
|
* \param[in] operation, the operation to perform, (SIOCSIFADDR, SIOCSIFNETMASK,
|
|
* SIOCSIFBRDADDR, SIOCSIFFLAGS), e.g. SIOCSIFBRDADDR
|
|
* \return 0 on success, otherwise 1, if couldn't open a socket and 2 if the ioctl fails
|
|
* \note
|
|
* @ingroup ?????
|
|
*/
|
|
int setInterfaceParameter(char *interfaceName, char *settingAddress, int operation);
|
|
|
|
/*! \fn int set_gateway(char*, char*)
|
|
* \brief This function sets the interface gateway
|
|
* \param[in] interfaceName, the name of the interface, e.g. nasmesh0 or nasmesh1
|
|
* \param[in] address, the address of the gateway, e.g. 10.0.1.2
|
|
* \return 0 on success, otherwise 1, if couldn't open a socket and 2 if the ioctl fails
|
|
* \note
|
|
* @ingroup ?????
|
|
*/
|
|
int set_gateway(char *interfaceName, char *gateway);
|
|
|
|
/*! \fn void setBaseNetAddress(char*)
|
|
* \brief This function sets the basic network address used
|
|
* \param[in] baseAddr, the new basic address e.g.for 10.0.1.2, would be 10.0
|
|
* \note
|
|
* @ingroup ?????
|
|
*/
|
|
void setBaseNetAddress(char *baseAddr);
|
|
|
|
/*! \fn char* getBaseNetAddress()
|
|
* \brief This function returns the basic network address used
|
|
* \return the basic network address in use
|
|
* \note
|
|
* @ingroup ?????
|
|
*/
|
|
char *getBaseNetAddress(void);
|
|
|
|
/*! \fn void setNetMask(char*)
|
|
* \brief This function sets the new default network mask used
|
|
* \param[in] newNetworkMask, the new network mask e.g.for 255.255.0.0
|
|
* \note
|
|
* @ingroup ?????
|
|
*/
|
|
void setNetMask(char *baseAddr);
|
|
|
|
/*! \fn char* getNetMask()
|
|
* \brief This function returns the network mask address in use
|
|
* \return the network mask in use
|
|
* \note
|
|
* @ingroup ?????
|
|
*/
|
|
char *getNetMask(void);
|
|
|
|
/*! \fn coid setBroadcastAddress(char*)
|
|
* \brief This function sets the new broadcast address used
|
|
* \param[in] newNetworkMask, the new broadcast address e.g.for 10.0.255.255
|
|
* \note
|
|
* @ingroup ?????
|
|
*/
|
|
void setBroadcastAddress(char *baseAddr);
|
|
|
|
/*! \fn char* getBroadcastAddress()
|
|
* \brief This function returns the broadcast address in use
|
|
* \return the broadcast address in use
|
|
* \note
|
|
* @ingroup ?????
|
|
*/
|
|
char *getBroadcastAddress(void);
|
|
|
|
int bringInterfaceUp(char *interfaceName, int up);
|
|
|
|
int rb_validate_config_ipv4(int cx, int inst, int rb);
|
|
int rb_conf_ipv4(int action, int cx, int inst, int rb, int dscp, in_addr_t saddr_ipv4, in_addr_t daddr_ipv4);
|
|
void rb_ioctl_init(int inst);
|
|
int rb_stats_req(int inst);
|
|
void init_socket(void);
|
|
in_addr_t ipv4_address(int thirdOctet, int fourthOctet);
|
|
#endif /*NAS_CONFIG_H_*/
|