kaltenbe
85ad49ef73
git-svn-id: http://svn.eurecom.fr/openair4G/trunk@7837 818b1a75-f10b-46b9-bf7c-635c3b92a50f
70 lines
2.5 KiB
Bash
70 lines
2.5 KiB
Bash
#!/bin/bash
|
|
|
|
PCI=`lspci -m | grep Xilinx`
|
|
if [ -z "$PCI" ]; then
|
|
echo "No card found. Stopping!"
|
|
return
|
|
fi
|
|
|
|
## This part corrects the wrong configuration of the endpoint done by the bios in some machines
|
|
echo "$PCI" | while read config_reg; do
|
|
SLOT_NUMBER=`echo $config_reg | awk -F\" '{print $1}'`
|
|
sudo setpci -s $SLOT_NUMBER 60.b=10
|
|
done
|
|
|
|
load_module() {
|
|
mod_name=${1##*/}
|
|
mod_name=${mod_name%.*}
|
|
if awk "/$mod_name/ {found=1 ;exit} END {if (found!=1) exit 1}" /proc/modules
|
|
then
|
|
echo "module $mod_name already loaded: I remove it first"
|
|
sudo rmmod $mod_name
|
|
fi
|
|
echo loading $mod_name
|
|
sudo insmod $1
|
|
}
|
|
|
|
load_module $OPENAIR_TARGETS/ARCH/EXMIMO/DRIVER/eurecom/openair_rf.ko
|
|
sleep 1
|
|
|
|
if [ ! -e /dev/openair0 ]; then
|
|
sudo mknod /dev/openair0 c 127 0
|
|
sudo chmod a+rw /dev/openair0
|
|
fi
|
|
|
|
DEVICE=`echo $PCI | awk -F\" '{print $(NF-1)}' | awk '{print $2}'`
|
|
DEVICE_SWID=${DEVICE:2:2}
|
|
if [ $DEVICE_SWID == '08' ]; then
|
|
echo "Using firmware version 8"
|
|
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2
|
|
else
|
|
if [ $DEVICE_SWID == '09' ]; then
|
|
echo "Using firmware version 9"
|
|
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v9
|
|
else
|
|
if [ $DEVICE_SWID == '0a' ]; then
|
|
echo "Using firware version 10"
|
|
#$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR0_DIR/express-mimo/software/sdr/exmimo2/sdr_expressmimo2
|
|
#$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10_spectra
|
|
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10
|
|
else
|
|
echo 'No corresponding firmware found'
|
|
return
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
#load_module $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
|
|
|
|
#if [ "$1" = "eNB" ]; then
|
|
# echo "bring up oai0 interface for enb"
|
|
# sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
|
|
# $OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.9 -r 1
|
|
#else
|
|
# if [ "$1" = "UE" ]; then
|
|
# echo "bring up oai0 interface for UE"
|
|
# sudo ifconfig oai0 10.0.1.9 netmask 255.255.255.0 broadcast 10.0.1.255
|
|
# $OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.9 -t 10.0.1.1 -r 1
|
|
# fi
|
|
#fi
|