1. Adding a "SL" frequency for Sidelink mode. The importance of this variable is to ensure that when we are in mode 1 (UE+UE+gNB), that the slot configuration and frequencies do not overlap. This SL frequency is important for rotation and allows us to utilize the OFDM modulation and demodulation functions that already exist in OAI. 2. Adding sl_mode to the command line for proper UE deployment when in SL mode. sl_mode can be set to 0, 1, or 2. sl_mode 0 indicates no-Sidelink at all, mode 1 is gNB, UE, and UE (3GPP defines mode numbers). sl_mode 2 indicated UE to UE communications with no gNB at all. 3. New functions for calculating the carrier frequency for SL mode.
642 lines
21 KiB
C
642 lines
21 KiB
C
/*
|
|
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
* this work for additional information regarding copyright ownership.
|
|
* The OpenAirInterface Software Alliance licenses this file to You under
|
|
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
|
|
* except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.openairinterface.org/?page_id=698
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*-------------------------------------------------------------------------------
|
|
* For more information about the OpenAirInterface (OAI) Software Alliance:
|
|
* contact@openairinterface.org
|
|
*/
|
|
|
|
|
|
#define _GNU_SOURCE /* See feature_test_macros(7) */
|
|
#include <sched.h>
|
|
#include <stdbool.h>
|
|
#include <signal.h>
|
|
|
|
#include "T.h"
|
|
#include "assertions.h"
|
|
#include "PHY/types.h"
|
|
#include "PHY/defs_nr_UE.h"
|
|
#include "SCHED_NR_UE/defs.h"
|
|
#include "common/ran_context.h"
|
|
#include "common/config/config_userapi.h"
|
|
//#include "common/utils/threadPool/thread-pool.h"
|
|
#include "common/utils/load_module_shlib.h"
|
|
//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
|
|
#include "common/utils/nr/nr_common.h"
|
|
|
|
#include "radio/COMMON/common_lib.h"
|
|
#include "radio/ETHERNET/USERSPACE/LIB/if_defs.h"
|
|
|
|
//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
|
|
#include "openair1/PHY/MODULATION/nr_modulation.h"
|
|
#include "PHY/phy_vars_nr_ue.h"
|
|
#include "PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h"
|
|
#include "PHY/NR_TRANSPORT/nr_dlsch.h"
|
|
//#include "../../SIMU/USER/init_lte.h"
|
|
|
|
#include "RRC/LTE/rrc_vars.h"
|
|
#include "PHY_INTERFACE/phy_interface_vars.h"
|
|
#include "NR_IF_Module.h"
|
|
#include "openair1/SIMULATION/TOOLS/sim.h"
|
|
|
|
#ifdef SMBV
|
|
#include "PHY/TOOLS/smbv.h"
|
|
unsigned short config_frames[4] = {2,9,11,13};
|
|
#endif
|
|
#include "common/utils/LOG/log.h"
|
|
#include "common/utils/LOG/vcd_signal_dumper.h"
|
|
|
|
#include "UTIL/OPT/opt.h"
|
|
#include "enb_config.h"
|
|
#include "LAYER2/nr_pdcp/nr_pdcp_oai_api.h"
|
|
|
|
#include "intertask_interface.h"
|
|
|
|
#include "PHY/INIT/nr_phy_init.h"
|
|
#include "system.h"
|
|
#include <openair2/RRC/NR_UE/rrc_proto.h>
|
|
#include <openair2/LAYER2/NR_MAC_UE/mac_defs.h>
|
|
#include <openair2/LAYER2/NR_MAC_UE/mac_proto.h>
|
|
#include <openair2/NR_UE_PHY_INTERFACE/NR_IF_Module.h>
|
|
#include <openair1/SCHED_NR_UE/fapi_nr_ue_l1.h>
|
|
|
|
/* Callbacks, globals and object handlers */
|
|
|
|
//#include "stats.h"
|
|
// current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
|
|
#include "PHY/TOOLS/phy_scope_interface.h"
|
|
#include "PHY/TOOLS/nr_phy_scope.h"
|
|
#include <executables/nr-uesoftmodem.h>
|
|
#include "executables/softmodem-common.h"
|
|
#include "executables/thread-common.h"
|
|
|
|
#include "nr_nas_msg_sim.h"
|
|
#include <openair1/PHY/MODULATION/nr_modulation.h>
|
|
#include "openair2/GNB_APP/gnb_paramdef.h"
|
|
|
|
extern const char *duplex_mode[];
|
|
THREAD_STRUCT thread_struct;
|
|
nrUE_params_t nrUE_params;
|
|
|
|
// Thread variables
|
|
pthread_cond_t nfapi_sync_cond;
|
|
pthread_mutex_t nfapi_sync_mutex;
|
|
int nfapi_sync_var=-1; //!< protected by mutex \ref nfapi_sync_mutex
|
|
uint16_t sf_ahead=6; //??? value ???
|
|
pthread_cond_t sync_cond;
|
|
pthread_mutex_t sync_mutex;
|
|
int sync_var=-1; //!< protected by mutex \ref sync_mutex.
|
|
int config_sync_var=-1;
|
|
|
|
// not used in UE
|
|
instance_t CUuniqInstance=0;
|
|
instance_t DUuniqInstance=0;
|
|
|
|
int get_node_type() {return -1;}
|
|
|
|
RAN_CONTEXT_t RC;
|
|
int oai_exit = 0;
|
|
|
|
|
|
extern int16_t nr_dlsch_demod_shift;
|
|
static int tx_max_power[MAX_NUM_CCs] = {0};
|
|
|
|
int single_thread_flag = 1;
|
|
int tddflag = 0;
|
|
int vcdflag = 0;
|
|
|
|
double rx_gain_off = 0.0;
|
|
char *usrp_args = NULL;
|
|
char *tx_subdev = NULL;
|
|
char *rx_subdev = NULL;
|
|
char *rrc_config_path = NULL;
|
|
char *uecap_file = NULL;
|
|
int dumpframe = 0;
|
|
|
|
uint64_t downlink_frequency[MAX_NUM_CCs][4];
|
|
int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
|
|
uint64_t sidelink_frequency[MAX_NUM_CCs][4];
|
|
int rx_input_level_dBm;
|
|
|
|
#if MAX_NUM_CCs == 1
|
|
rx_gain_t rx_gain_mode[MAX_NUM_CCs][4] = {{max_gain,max_gain,max_gain,max_gain}};
|
|
double tx_gain[MAX_NUM_CCs][4] = {{20,0,0,0}};
|
|
double rx_gain[MAX_NUM_CCs][4] = {{110,0,0,0}};
|
|
#else
|
|
rx_gain_t rx_gain_mode[MAX_NUM_CCs][4] = {{max_gain,max_gain,max_gain,max_gain},{max_gain,max_gain,max_gain,max_gain}};
|
|
double tx_gain[MAX_NUM_CCs][4] = {{20,0,0,0},{20,0,0,0}};
|
|
double rx_gain[MAX_NUM_CCs][4] = {{110,0,0,0},{20,0,0,0}};
|
|
#endif
|
|
|
|
// UE and OAI config variables
|
|
|
|
openair0_config_t openair0_cfg[MAX_CARDS];
|
|
int16_t node_synch_ref[MAX_NUM_CCs];
|
|
int otg_enabled;
|
|
double cpuf;
|
|
|
|
|
|
int chain_offset = 0;
|
|
int card_offset = 0;
|
|
uint64_t num_missed_slots = 0; // counter for the number of missed slots
|
|
int transmission_mode = 1;
|
|
int numerology = 0;
|
|
int oaisim_flag = 0;
|
|
int emulate_rf = 0;
|
|
uint32_t N_RB_DL = 106;
|
|
|
|
/* see file openair2/LAYER2/MAC/main.c for why abstraction_flag is needed
|
|
* this is very hackish - find a proper solution
|
|
*/
|
|
uint8_t abstraction_flag=0;
|
|
|
|
nr_bler_struct nr_bler_data[NR_NUM_MCS];
|
|
|
|
static void init_bler_table(char*);
|
|
|
|
/*---------------------BMC: timespec helpers -----------------------------*/
|
|
|
|
struct timespec min_diff_time = { .tv_sec = 0, .tv_nsec = 0 };
|
|
struct timespec max_diff_time = { .tv_sec = 0, .tv_nsec = 0 };
|
|
|
|
struct timespec clock_difftime(struct timespec start, struct timespec end) {
|
|
struct timespec temp;
|
|
|
|
if ((end.tv_nsec-start.tv_nsec)<0) {
|
|
temp.tv_sec = end.tv_sec-start.tv_sec-1;
|
|
temp.tv_nsec = 1000000000+end.tv_nsec-start.tv_nsec;
|
|
} else {
|
|
temp.tv_sec = end.tv_sec-start.tv_sec;
|
|
temp.tv_nsec = end.tv_nsec-start.tv_nsec;
|
|
}
|
|
|
|
return temp;
|
|
}
|
|
|
|
void print_difftimes(void) {
|
|
LOG_I(HW,"difftimes min = %lu ns ; max = %lu ns\n", min_diff_time.tv_nsec, max_diff_time.tv_nsec);
|
|
}
|
|
|
|
int create_tasks_nrue(uint32_t ue_nb) {
|
|
LOG_D(NR_RRC, "%s(ue_nb:%d)\n", __FUNCTION__, ue_nb);
|
|
itti_wait_ready(1);
|
|
|
|
if (ue_nb > 0) {
|
|
LOG_I(NR_RRC,"create TASK_RRC_NRUE \n");
|
|
if (itti_create_task (TASK_RRC_NRUE, rrc_nrue_task, NULL) < 0) {
|
|
LOG_E(NR_RRC, "Create task for RRC UE failed\n");
|
|
return -1;
|
|
}
|
|
if (get_softmodem_params()->nsa) {
|
|
init_connections_with_lte_ue();
|
|
if (itti_create_task (TASK_RRC_NSA_NRUE, recv_msgs_from_lte_ue, NULL) < 0) {
|
|
LOG_E(NR_RRC, "Create task for RRC NSA nr-UE failed\n");
|
|
return -1;
|
|
}
|
|
}
|
|
if (itti_create_task (TASK_NAS_NRUE, nas_nrue_task, NULL) < 0) {
|
|
LOG_E(NR_RRC, "Create task for NAS UE failed\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
itti_wait_ready(0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void exit_function(const char *file, const char *function, const int line, const char *s, const int assert)
|
|
{
|
|
int CC_id;
|
|
|
|
if (s != NULL) {
|
|
printf("%s:%d %s() Exiting OAI softmodem: %s\n",file,line, function, s);
|
|
}
|
|
|
|
oai_exit = 1;
|
|
|
|
if (PHY_vars_UE_g && PHY_vars_UE_g[0]) {
|
|
for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
|
|
if (PHY_vars_UE_g[0][CC_id] && PHY_vars_UE_g[0][CC_id]->rfdevice.trx_end_func)
|
|
PHY_vars_UE_g[0][CC_id]->rfdevice.trx_end_func(&PHY_vars_UE_g[0][CC_id]->rfdevice);
|
|
}
|
|
}
|
|
|
|
if (assert) {
|
|
abort();
|
|
} else {
|
|
sleep(1); // allow lte-softmodem threads to exit first
|
|
exit(EXIT_SUCCESS);
|
|
}
|
|
}
|
|
|
|
uint64_t get_nrUE_optmask(void) {
|
|
return nrUE_params.optmask;
|
|
}
|
|
|
|
uint64_t set_nrUE_optmask(uint64_t bitmask) {
|
|
nrUE_params.optmask = nrUE_params.optmask | bitmask;
|
|
return nrUE_params.optmask;
|
|
}
|
|
|
|
nrUE_params_t *get_nrUE_params(void) {
|
|
return &nrUE_params;
|
|
}
|
|
|
|
static void get_options(void) {
|
|
|
|
paramdef_t cmdline_params[] =CMDLINE_NRUEPARAMS_DESC ;
|
|
int numparams = sizeof(cmdline_params)/sizeof(paramdef_t);
|
|
config_get(cmdline_params,numparams,NULL);
|
|
|
|
if (vcdflag > 0)
|
|
ouput_vcd = 1;
|
|
}
|
|
|
|
// set PHY vars from command line
|
|
void set_options(int CC_id, PHY_VARS_NR_UE *UE){
|
|
NR_DL_FRAME_PARMS *fp = &UE->frame_parms;
|
|
|
|
// Init power variables
|
|
tx_max_power[CC_id] = tx_max_power[0];
|
|
rx_gain[0][CC_id] = rx_gain[0][0];
|
|
tx_gain[0][CC_id] = tx_gain[0][0];
|
|
|
|
// Set UE variables
|
|
UE->rx_total_gain_dB = (int)rx_gain[CC_id][0] + rx_gain_off;
|
|
UE->tx_total_gain_dB = (int)tx_gain[CC_id][0];
|
|
UE->tx_power_max_dBm = tx_max_power[CC_id];
|
|
UE->rf_map.card = card_offset;
|
|
UE->rf_map.chain = CC_id + chain_offset;
|
|
UE->max_ldpc_iterations = nrUE_params.max_ldpc_iterations;
|
|
UE->UE_scan_carrier = nrUE_params.UE_scan_carrier;
|
|
UE->UE_fo_compensation = nrUE_params.UE_fo_compensation;
|
|
UE->if_freq = nrUE_params.if_freq;
|
|
UE->if_freq_off = nrUE_params.if_freq_off;
|
|
UE->chest_freq = nrUE_params.chest_freq;
|
|
UE->chest_time = nrUE_params.chest_time;
|
|
UE->no_timing_correction = nrUE_params.no_timing_correction;
|
|
UE->timing_advance = nrUE_params.timing_advance;
|
|
|
|
LOG_I(PHY,"Set UE_fo_compensation %d, UE_scan_carrier %d, UE_no_timing_correction %d \n, chest-freq %d, chest-time %d\n",
|
|
UE->UE_fo_compensation, UE->UE_scan_carrier, UE->no_timing_correction, UE->chest_freq, UE->chest_time);
|
|
|
|
// Set FP variables
|
|
|
|
if (tddflag){
|
|
fp->frame_type = TDD;
|
|
LOG_I(PHY, "Set UE frame_type %d\n", fp->frame_type);
|
|
}
|
|
|
|
fp->nb_antennas_rx = nrUE_params.nb_antennas_rx;
|
|
fp->nb_antennas_tx = nrUE_params.nb_antennas_tx;
|
|
fp->threequarter_fs = nrUE_params.threequarter_fs;
|
|
fp->N_RB_DL = nrUE_params.N_RB_DL;
|
|
fp->ssb_start_subcarrier = nrUE_params.ssb_start_subcarrier;
|
|
fp->ofdm_offset_divisor = nrUE_params.ofdm_offset_divisor;
|
|
|
|
LOG_I(PHY, "Set UE nb_rx_antenna %d, nb_tx_antenna %d, threequarter_fs %d, ssb_start_subcarrier %d\n", fp->nb_antennas_rx, fp->nb_antennas_tx, fp->threequarter_fs, fp->ssb_start_subcarrier);
|
|
|
|
}
|
|
|
|
void init_openair0(void) {
|
|
int card;
|
|
int freq_off = 0;
|
|
NR_DL_FRAME_PARMS *frame_parms = &PHY_vars_UE_g[0][0]->frame_parms;
|
|
|
|
for (card=0; card<MAX_CARDS; card++) {
|
|
uint64_t dl_carrier, ul_carrier, sl_carrier;
|
|
openair0_cfg[card].configFilename = NULL;
|
|
openair0_cfg[card].threequarter_fs = frame_parms->threequarter_fs;
|
|
openair0_cfg[card].sample_rate = frame_parms->samples_per_subframe * 1e3;
|
|
openair0_cfg[card].samples_per_frame = frame_parms->samples_per_frame;
|
|
|
|
if (frame_parms->frame_type==TDD)
|
|
openair0_cfg[card].duplex_mode = duplex_mode_TDD;
|
|
else
|
|
openair0_cfg[card].duplex_mode = duplex_mode_FDD;
|
|
|
|
openair0_cfg[card].Mod_id = 0;
|
|
openair0_cfg[card].num_rb_dl = frame_parms->N_RB_DL;
|
|
openair0_cfg[card].clock_source = get_softmodem_params()->clock_source;
|
|
openair0_cfg[card].time_source = get_softmodem_params()->timing_source;
|
|
openair0_cfg[card].tune_offset = get_softmodem_params()->tune_offset;
|
|
openair0_cfg[card].tx_num_channels = min(4, frame_parms->nb_antennas_tx);
|
|
openair0_cfg[card].rx_num_channels = min(4, frame_parms->nb_antennas_rx);
|
|
|
|
LOG_I(PHY, "HW: Configuring card %d, sample_rate %f, tx/rx num_channels %d/%d, duplex_mode %s\n",
|
|
card,
|
|
openair0_cfg[card].sample_rate,
|
|
openair0_cfg[card].tx_num_channels,
|
|
openair0_cfg[card].rx_num_channels,
|
|
duplex_mode[openair0_cfg[card].duplex_mode]);
|
|
|
|
nr_get_carrier_frequencies(PHY_vars_UE_g[0][0], &dl_carrier, &ul_carrier);
|
|
|
|
nr_rf_card_config_freq(&openair0_cfg[card], ul_carrier, dl_carrier, freq_off);
|
|
|
|
if (get_softmodem_params()->sl_mode == 2) {
|
|
nr_get_carrier_frequencies_sl(PHY_vars_UE_g[0][0], &sl_carrier);
|
|
nr_rf_card_config_freq(&openair0_cfg[card], sl_carrier, sl_carrier, freq_off);
|
|
}
|
|
|
|
nr_rf_card_config_gain(&openair0_cfg[card], rx_gain_off);
|
|
|
|
openair0_cfg[card].configFilename = get_softmodem_params()->rf_config_file;
|
|
|
|
if (usrp_args) openair0_cfg[card].sdr_addrs = usrp_args;
|
|
if (tx_subdev) openair0_cfg[card].tx_subdev = tx_subdev;
|
|
if (rx_subdev) openair0_cfg[card].rx_subdev = rx_subdev;
|
|
|
|
}
|
|
}
|
|
|
|
static void init_pdcp(int ue_id) {
|
|
uint32_t pdcp_initmask = (!IS_SOFTMODEM_NOS1) ? LINK_ENB_PDCP_TO_GTPV1U_BIT : (LINK_ENB_PDCP_TO_GTPV1U_BIT | PDCP_USE_NETLINK_BIT | LINK_ENB_PDCP_TO_IP_DRIVER_BIT);
|
|
|
|
/*if (IS_SOFTMODEM_RFSIM || (nfapi_getmode()==NFAPI_UE_STUB_PNF)) {
|
|
pdcp_initmask = pdcp_initmask | UE_NAS_USE_TUN_BIT;
|
|
}*/
|
|
|
|
if (IS_SOFTMODEM_NOKRNMOD) {
|
|
pdcp_initmask = pdcp_initmask | UE_NAS_USE_TUN_BIT;
|
|
}
|
|
if (get_softmodem_params()->nsa && rlc_module_init(0) != 0) {
|
|
LOG_I(RLC, "Problem at RLC initiation \n");
|
|
}
|
|
nr_pdcp_layer_init();
|
|
nr_pdcp_module_init(pdcp_initmask, ue_id);
|
|
pdcp_set_rlc_data_req_func((send_rlc_data_req_func_t) rlc_data_req);
|
|
pdcp_set_pdcp_data_ind_func((pdcp_data_ind_func_t) pdcp_data_ind);
|
|
}
|
|
|
|
// Stupid function addition because UE itti messages queues definition is common with eNB
|
|
void *rrc_enb_process_msg(void *notUsed) {
|
|
return NULL;
|
|
}
|
|
|
|
static bool stop_immediately = false;
|
|
static void trigger_stop(int sig)
|
|
{
|
|
if (!oai_exit)
|
|
itti_wait_tasks_unblock();
|
|
}
|
|
static void trigger_deregistration(int sig)
|
|
{
|
|
if (!stop_immediately) {
|
|
MessageDef *msg = itti_alloc_new_message(TASK_RRC_UE_SIM, 0, NAS_DEREGISTRATION_REQ);
|
|
itti_send_msg_to_task(TASK_NAS_NRUE, 0, msg);
|
|
stop_immediately = true;
|
|
static const char m[] = "Press ^C again to trigger immediate shutdown\n";
|
|
__attribute__((unused)) int unused = write(STDOUT_FILENO, m, sizeof(m) - 1);
|
|
signal(SIGALRM, trigger_stop);
|
|
alarm(5);
|
|
} else {
|
|
itti_wait_tasks_unblock();
|
|
}
|
|
}
|
|
|
|
static void get_channel_model_mode() {
|
|
paramdef_t GNBParams[] = GNBPARAMS_DESC;
|
|
config_get(GNBParams, sizeof(GNBParams)/sizeof(paramdef_t), NULL);
|
|
int num_xp_antennas = *GNBParams[GNB_PDSCH_ANTENNAPORTS_XP_IDX].iptr;
|
|
|
|
if (num_xp_antennas == 2)
|
|
init_bler_table("NR_MIMO2x2_AWGN_RESULTS_DIR");
|
|
else
|
|
init_bler_table("NR_AWGN_RESULTS_DIR");
|
|
}
|
|
|
|
int NB_UE_INST = 1;
|
|
|
|
int main( int argc, char **argv ) {
|
|
int set_exe_prio = 1;
|
|
if (checkIfFedoraDistribution())
|
|
if (checkIfGenericKernelOnFedora())
|
|
if (checkIfInsideContainer())
|
|
set_exe_prio = 0;
|
|
if (set_exe_prio)
|
|
set_priority(79);
|
|
|
|
//uint8_t beta_ACK=0,beta_RI=0,beta_CQI=2;
|
|
PHY_VARS_NR_UE *UE[MAX_NUM_CCs];
|
|
start_background_system();
|
|
|
|
if ( load_configmodule(argc,argv,CONFIG_ENABLECMDLINEONLY) == NULL) {
|
|
exit_fun("[SOFTMODEM] Error, configuration module init failed\n");
|
|
}
|
|
//set_softmodem_sighandler();
|
|
CONFIG_SETRTFLAG(CONFIG_NOEXITONHELP);
|
|
memset(openair0_cfg,0,sizeof(openair0_config_t)*MAX_CARDS);
|
|
memset(tx_max_power,0,sizeof(int)*MAX_NUM_CCs);
|
|
// initialize logging
|
|
logInit();
|
|
// get options and fill parameters from configuration file
|
|
|
|
get_options (); //Command-line options specific for NRUE
|
|
|
|
get_common_options(SOFTMODEM_5GUE_BIT);
|
|
CONFIG_CLEARRTFLAG(CONFIG_NOEXITONHELP);
|
|
#if T_TRACER
|
|
T_Config_Init();
|
|
#endif
|
|
initTpool(get_softmodem_params()->threadPoolConfig, &(nrUE_params.Tpool), cpumeas(CPUMEAS_GETSTATE));
|
|
//randominit (0);
|
|
set_taus_seed (0);
|
|
|
|
cpuf=get_cpu_freq_GHz();
|
|
itti_init(TASK_MAX, tasks_info);
|
|
|
|
init_opt() ;
|
|
load_nrLDPClib(NULL);
|
|
|
|
if (ouput_vcd) {
|
|
vcd_signal_dumper_init("/tmp/openair_dump_nrUE.vcd");
|
|
}
|
|
|
|
#ifndef PACKAGE_VERSION
|
|
# define PACKAGE_VERSION "UNKNOWN-EXPERIMENTAL"
|
|
#endif
|
|
LOG_I(HW, "Version: %s\n", PACKAGE_VERSION);
|
|
|
|
init_NR_UE(1,uecap_file,rrc_config_path);
|
|
|
|
int mode_offset = get_softmodem_params()->nsa ? NUMBER_OF_UE_MAX : 1;
|
|
uint16_t node_number = get_softmodem_params()->node_number;
|
|
ue_id_g = (node_number == 0) ? 0 : node_number - 2;
|
|
AssertFatal(ue_id_g >= 0, "UE id is expected to be nonnegative.\n");
|
|
if(IS_SOFTMODEM_NOS1 || get_softmodem_params()->sa || get_softmodem_params()->nsa) {
|
|
if(node_number == 0) {
|
|
init_pdcp(0);
|
|
}
|
|
else {
|
|
init_pdcp(mode_offset + ue_id_g);
|
|
}
|
|
}
|
|
|
|
PHY_vars_UE_g = malloc(sizeof(PHY_VARS_NR_UE **));
|
|
PHY_vars_UE_g[0] = malloc(sizeof(PHY_VARS_NR_UE *)*MAX_NUM_CCs);
|
|
if (get_softmodem_params()->emulate_l1) {
|
|
RCconfig_nr_ue_macrlc();
|
|
get_channel_model_mode();
|
|
}
|
|
|
|
if (get_softmodem_params()->do_ra)
|
|
AssertFatal(get_softmodem_params()->phy_test == 0,"RA and phy_test are mutually exclusive\n");
|
|
|
|
if (get_softmodem_params()->sa)
|
|
AssertFatal(get_softmodem_params()->phy_test == 0,"Standalone mode and phy_test are mutually exclusive\n");
|
|
|
|
if (!get_softmodem_params()->nsa && get_softmodem_params()->emulate_l1)
|
|
start_oai_nrue_threads();
|
|
|
|
if (!get_softmodem_params()->emulate_l1) {
|
|
for (int CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
|
|
PHY_vars_UE_g[0][CC_id] = (PHY_VARS_NR_UE *)malloc(sizeof(PHY_VARS_NR_UE));
|
|
UE[CC_id] = PHY_vars_UE_g[0][CC_id];
|
|
memset(UE[CC_id],0,sizeof(PHY_VARS_NR_UE));
|
|
|
|
set_options(CC_id, UE[CC_id]);
|
|
NR_UE_MAC_INST_t *mac = get_mac_inst(0);
|
|
|
|
if (get_softmodem_params()->sa) { // set frame config to initial values from command line and assume that the SSB is centered on the grid
|
|
uint16_t nr_band = get_band(downlink_frequency[CC_id][0],uplink_frequency_offset[CC_id][0]);
|
|
mac->nr_band = nr_band;
|
|
nr_init_frame_parms_ue_sa(&UE[CC_id]->frame_parms,
|
|
downlink_frequency[CC_id][0],
|
|
uplink_frequency_offset[CC_id][0],
|
|
get_softmodem_params()->numerology,
|
|
nr_band);
|
|
}
|
|
else{
|
|
DevAssert(mac->if_module != NULL && mac->if_module->phy_config_request != NULL);
|
|
mac->if_module->phy_config_request(&mac->phy_config);
|
|
mac->phy_config_request_sent = true;
|
|
fapi_nr_config_request_t *nrUE_config = &UE[CC_id]->nrUE_config;
|
|
|
|
nr_init_frame_parms_ue(&UE[CC_id]->frame_parms, nrUE_config,
|
|
*mac->scc->downlinkConfigCommon->frequencyInfoDL->frequencyBandList.list.array[0]);
|
|
}
|
|
|
|
init_nr_ue_vars(UE[CC_id], 0, abstraction_flag);
|
|
}
|
|
|
|
init_openair0();
|
|
// init UE_PF_PO and mutex lock
|
|
pthread_mutex_init(&ue_pf_po_mutex, NULL);
|
|
memset (&UE_PF_PO[0][0], 0, sizeof(UE_PF_PO_t)*NUMBER_OF_UE_MAX*MAX_NUM_CCs);
|
|
set_latency_target();
|
|
|
|
if(IS_SOFTMODEM_DOSCOPE_QT) {
|
|
load_softscope("nrqt",PHY_vars_UE_g[0][0]);
|
|
}
|
|
|
|
if(IS_SOFTMODEM_DOSCOPE) {
|
|
load_softscope("nr",PHY_vars_UE_g[0][0]);
|
|
}
|
|
|
|
init_NR_UE_threads(1);
|
|
printf("UE threads created by %ld\n", gettid());
|
|
}
|
|
|
|
// wait for end of program
|
|
printf("TYPE <CTRL-C> TO TERMINATE\n");
|
|
|
|
if (create_tasks_nrue(1) < 0) {
|
|
printf("cannot create ITTI tasks\n");
|
|
exit(-1); // need a softer mode
|
|
}
|
|
|
|
// Sleep a while before checking all parameters have been used
|
|
// Some are used directly in external threads, asynchronously
|
|
sleep(2);
|
|
config_check_unknown_cmdlineopt(CONFIG_CHECKALLSECTIONS);
|
|
|
|
// wait for end of program
|
|
printf("Entering ITTI signals handler\n");
|
|
printf("TYPE <CTRL-C> TO TERMINATE\n");
|
|
itti_wait_tasks_end(trigger_deregistration);
|
|
printf("Returned from ITTI signal handler\n");
|
|
oai_exit=1;
|
|
printf("oai_exit=%d\n",oai_exit);
|
|
|
|
if (ouput_vcd)
|
|
vcd_signal_dumper_close();
|
|
|
|
if (PHY_vars_UE_g && PHY_vars_UE_g[0]) {
|
|
for (int CC_id = 0; CC_id < MAX_NUM_CCs; CC_id++) {
|
|
PHY_VARS_NR_UE *phy_vars = PHY_vars_UE_g[0][CC_id];
|
|
if (phy_vars && phy_vars->rfdevice.trx_end_func)
|
|
phy_vars->rfdevice.trx_end_func(&phy_vars->rfdevice);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
// Read in each MCS file and build BLER-SINR-TB table
|
|
static void init_bler_table(char *env_string) {
|
|
memset(nr_bler_data, 0, sizeof(nr_bler_data));
|
|
|
|
const char *awgn_results_dir = getenv(env_string);
|
|
if (!awgn_results_dir) {
|
|
LOG_W(NR_MAC, "No %s\n", env_string);
|
|
return;
|
|
}
|
|
|
|
for (unsigned int i = 0; i < NR_NUM_MCS; i++) {
|
|
char fName[1024];
|
|
snprintf(fName, sizeof(fName), "%s/mcs%u_awgn_5G.csv", awgn_results_dir, i);
|
|
FILE *pFile = fopen(fName, "r");
|
|
if (!pFile) {
|
|
LOG_E(NR_MAC, "%s: open %s: %s\n", __func__, fName, strerror(errno));
|
|
continue;
|
|
}
|
|
size_t bufSize = 1024;
|
|
char * line = NULL;
|
|
char * token;
|
|
char * temp = NULL;
|
|
int nlines = 0;
|
|
while (getline(&line, &bufSize, pFile) > 0) {
|
|
if (!strncmp(line, "SNR", 3)) {
|
|
continue;
|
|
}
|
|
|
|
if (nlines > NR_NUM_SINR) {
|
|
LOG_E(NR_MAC, "BLER FILE ERROR - num lines greater than expected - file: %s\n", fName);
|
|
abort();
|
|
}
|
|
|
|
token = strtok_r(line, ";", &temp);
|
|
int ncols = 0;
|
|
while (token != NULL) {
|
|
if (ncols > NUM_BLER_COL) {
|
|
LOG_E(NR_MAC, "BLER FILE ERROR - num of cols greater than expected\n");
|
|
abort();
|
|
}
|
|
|
|
nr_bler_data[i].bler_table[nlines][ncols] = strtof(token, NULL);
|
|
ncols++;
|
|
|
|
token = strtok_r(NULL, ";", &temp);
|
|
}
|
|
nlines++;
|
|
}
|
|
nr_bler_data[i].length = nlines;
|
|
fclose(pFile);
|
|
}
|
|
}
|