Rohit Gupta
9162c069d1
The throughput for the bandrich dongle was limited to 13Mb/s in downlink UDP with iperf, with lots of packets lost (we sent 15Mb/s). TCP was working fine. Replacing /dev/ttyUSB2 by /dev/ttyUSB0 for wvdial solves the issue. We also had to have separate data/control links. (See bandrich.txt in cmake_targets/autotests/v2/actions for full details.)
56 lines
1.5 KiB
Python
56 lines
1.5 KiB
Python
import time
|
|
|
|
from modem import quit, Modem
|
|
|
|
try:
|
|
modem = Modem("/dev/bandrich.control")
|
|
|
|
#test that modem is there
|
|
print "INFO: check modem's presence"
|
|
modem.send('AT')
|
|
if modem.wait().ret != True:
|
|
print "ERROR: no modem?"
|
|
quit(1)
|
|
|
|
#activate the modem, be brutal and reset it too!
|
|
print "INFO: reset and activate the modem"
|
|
modem.send('AT+CFUN=1,1')
|
|
if modem.wait().ret != True:
|
|
print "ERROR: failed asking modem for activation"
|
|
quit(1)
|
|
|
|
#modem has gone! wait for it to pop up again
|
|
modem.modem_reset_cycle()
|
|
|
|
#wait for modem to be connected
|
|
#timeout after one minute
|
|
print "INFO: wait for modem to be connected (timeout: one minute)"
|
|
start_time = time.time()
|
|
while True:
|
|
modem.send('AT+CGATT?')
|
|
r = modem.wait()
|
|
if r.ret != True:
|
|
print "ERROR: failed checking attachment status of modem"
|
|
quit(1)
|
|
if "+CGATT: 1" in r.data:
|
|
break
|
|
if not "CGATT: 0" in r.data:
|
|
print "ERROR: bad data when checking attachment status of modem"
|
|
quit(1)
|
|
time.sleep(0.1)
|
|
if time.time() > start_time + 60:
|
|
print "ERROR: modem not connected after one minute, close modem"
|
|
modem.send('AT+CFUN=4')
|
|
r = modem.wait()
|
|
if r.ret != True:
|
|
print "ERROR: closing modem failed"
|
|
quit(1)
|
|
|
|
print "INFO: modem is connected"
|
|
|
|
except BaseException, e:
|
|
print "ERROR: " + str(e)
|
|
quit(1)
|
|
|
|
quit(0)
|