Cedric Roux
4236ff2b3e
This commit introduces several enhancements in X2AP and RRC to deal
with ENDC. The main goal is to deal with UE's on/off and with various
errors.
The following work is included:
- DC prep and DC overall X2 timers
- X2 messages for UE release and DC timers' timeout
Open problems:
- what to do when the UE sends an scg Failure? This commit removes
the UE. And this removal may not be correctly done
- UE removal in the gNB's PHY layer (a next commit is coming,
but it is hackish and will need a rework)
63 lines
1.9 KiB
Plaintext
63 lines
1.9 KiB
Plaintext
Active_eNBs = ( "eNB_Eurecom_LTEBox");
|
|
# Asn1_verbosity, choice in: none, info, annoying
|
|
Asn1_verbosity = "none";
|
|
|
|
eNBs =
|
|
(
|
|
{
|
|
# real_time choice in {hard, rt-preempt, no}
|
|
real_time = "hard";
|
|
////////// Identification parameters:
|
|
eNB_ID = 0xe00;
|
|
|
|
cell_type = "CELL_MACRO_ENB";
|
|
|
|
eNB_name = "eNB_Eurecom_LTEBox";
|
|
|
|
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
|
tracking_area_code = 15;
|
|
plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
|
|
|
|
////////// Channel parameters:
|
|
// Default Paging DRX of the eNB as defined in TS 36.304
|
|
default_paging_drx = "PAGING_DRX_256";
|
|
|
|
////////// Physical parameters:
|
|
frame_type = "FDD";
|
|
prefix_type = "NORMAL";
|
|
eutra_band = 7;
|
|
downlink_frequency = 2680000000L;
|
|
uplink_frequency_offset = -120000000;
|
|
|
|
////////// MME parameters:
|
|
mme_ip_address = ( { ipv4 = "192.168.13.11";
|
|
ipv6 = "192:168:30::17";
|
|
active = "yes";
|
|
preference = "ipv4";
|
|
}
|
|
);
|
|
|
|
enable_measurement_reports = "no";
|
|
|
|
///X2
|
|
enable_x2 = "no";
|
|
t_reloc_prep = 1000; /* unit: millisecond */
|
|
tx2_reloc_overall = 2000; /* unit: millisecond */
|
|
t_dc_prep = 1000; /* unit: millisecond */
|
|
t_dc_overall = 2000; /* unit: millisecond */
|
|
|
|
NETWORK_INTERFACES :
|
|
{
|
|
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
|
|
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24";
|
|
|
|
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
|
|
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24";
|
|
|
|
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.13.10/24";
|
|
ENB_PORT_FOR_X2C = 36422; # Spec 36422
|
|
};
|
|
|
|
}
|
|
);
|