Robert Schmidt
d2f332e18e
With PMI reporting working (see HEAD^^), it seems that four layers put two much processing strain on the machine (cacofonix), which asserts immediately. In tests, it was found that the same test throughput (600Mbps) can be achieved with two layers, while not crashing the machine.
269 lines
9.0 KiB
Plaintext
269 lines
9.0 KiB
Plaintext
Active_gNBs = ( "gNB-OAI");
|
|
# Asn1_verbosity, choice in: none, info, annoying
|
|
Asn1_verbosity = "none";
|
|
|
|
gNBs =
|
|
(
|
|
{
|
|
////////// Identification parameters:
|
|
gNB_ID = 0xe00;
|
|
gNB_name = "gNB-OAI";
|
|
|
|
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
|
tracking_area_code = 1;
|
|
plmn_list = ({ mcc = 208; mnc = 97; mnc_length = 2; snssaiList = ( { sst = 1; }); });
|
|
|
|
nr_cellid = 1;
|
|
|
|
////////// Physical parameters:
|
|
|
|
pdsch_AntennaPorts_XP = 2;
|
|
pdsch_AntennaPorts_N1 = 2;
|
|
maxMIMO_layers = 2;
|
|
pusch_AntennaPorts = 4;
|
|
do_CSIRS = 1;
|
|
do_SRS = 0;
|
|
force_UL256qam_off = 1;
|
|
|
|
servingCellConfigCommon = (
|
|
{
|
|
#spCellConfigCommon
|
|
physCellId = 0;
|
|
# downlinkConfigCommon
|
|
#frequencyInfoDL
|
|
# center frequency = 4049.76 MHz
|
|
# selected SSB frequency = 4049.76 MHz
|
|
absoluteFrequencySSB = 669984;
|
|
dl_frequencyBand = 77;
|
|
# frequency point A = 4000.62 MHz
|
|
dl_absoluteFrequencyPointA = 666708;
|
|
#scs-SpecificCarrierList
|
|
dl_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
dl_subcarrierSpacing = 1;
|
|
dl_carrierBandwidth = 273;
|
|
#initialDownlinkBWP
|
|
#genericParameters
|
|
initialDLBWPlocationAndBandwidth = 1099; #38.101-1 Table 5.3.2-1
|
|
#
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialDLBWPsubcarrierSpacing = 1;
|
|
#pdcch-ConfigCommon
|
|
initialDLBWPcontrolResourceSetZero = 11;
|
|
initialDLBWPsearchSpaceZero = 0;
|
|
|
|
#uplinkConfigCommon
|
|
#frequencyInfoUL
|
|
ul_frequencyBand = 77;
|
|
#scs-SpecificCarrierList
|
|
ul_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
ul_subcarrierSpacing = 1;
|
|
ul_carrierBandwidth = 273;
|
|
pMax = 23;
|
|
#initialUplinkBWP
|
|
#genericParameters
|
|
initialULBWPlocationAndBandwidth = 1099;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialULBWPsubcarrierSpacing = 1;
|
|
#rach-ConfigCommon
|
|
#rach-ConfigGeneric
|
|
prach_ConfigurationIndex = 159;
|
|
#prach_msg1_FDM
|
|
#0 = one, 1=two, 2=four, 3=eight
|
|
prach_msg1_FDM = 0;
|
|
prach_msg1_FrequencyStart = 0;
|
|
zeroCorrelationZoneConfig = 0;
|
|
preambleReceivedTargetPower = -100;
|
|
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
|
|
preambleTransMax = 7;
|
|
#powerRampingStep
|
|
# 0=dB0,1=dB2,2=dB4,3=dB6
|
|
powerRampingStep = 2;
|
|
#ra_ReponseWindow
|
|
#1,2,4,8,10,20,40,80
|
|
ra_ResponseWindow = 5;
|
|
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
|
|
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
|
|
#one (0..15) 4,8,12,16,...60,64
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
|
|
#ra_ContentionResolutionTimer
|
|
#(0..7) 8,16,24,32,40,48,56,64
|
|
ra_ContentionResolutionTimer = 7;
|
|
rsrp_ThresholdSSB = 19;
|
|
#prach-RootSequenceIndex_PR
|
|
#1 = 839, 2 = 139
|
|
prach_RootSequenceIndex_PR = 2;
|
|
prach_RootSequenceIndex = 1;
|
|
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
|
|
#
|
|
msg1_SubcarrierSpacing = 1,
|
|
# restrictedSetConfig
|
|
# 0=unrestricted, 1=restricted type A, 2=restricted type B
|
|
restrictedSetConfig = 0,
|
|
|
|
# this is the offset between the last PRACH preamble power and the Msg3 PUSCH, 2 times the field value in dB
|
|
msg3_DeltaPreamble = 2;
|
|
p0_NominalWithGrant = -100;
|
|
|
|
# pucch-ConfigCommon setup :
|
|
# pucchGroupHopping
|
|
# 0 = neither, 1= group hopping, 2=sequence hopping
|
|
pucchGroupHopping = 0;
|
|
hoppingId = 0;
|
|
p0_nominal = -96;
|
|
|
|
ssb_PositionsInBurst_Bitmap = 0x1;
|
|
|
|
# ssb_periodicityServingCell
|
|
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
|
|
ssb_periodicityServingCell = 2;
|
|
|
|
# dmrs_TypeA_position
|
|
# 0 = pos2, 1 = pos3
|
|
dmrs_TypeA_Position = 0;
|
|
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
subcarrierSpacing = 1;
|
|
|
|
|
|
#tdd-UL-DL-ConfigurationCommon
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
referenceSubcarrierSpacing = 1;
|
|
# pattern1
|
|
# dl_UL_TransmissionPeriodicity
|
|
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
|
|
dl_UL_TransmissionPeriodicity = 5;
|
|
nrofDownlinkSlots = 3;
|
|
nrofDownlinkSymbols = 6;
|
|
nrofUplinkSlots = 1;
|
|
nrofUplinkSymbols = 4;
|
|
|
|
ssPBCH_BlockPower = -10;
|
|
}
|
|
|
|
);
|
|
|
|
|
|
# ------- SCTP definitions
|
|
SCTP :
|
|
{
|
|
# Number of streams to use in input/output
|
|
SCTP_INSTREAMS = 2;
|
|
SCTP_OUTSTREAMS = 2;
|
|
};
|
|
|
|
|
|
////////// AMF parameters:
|
|
amf_ip_address = ({ ipv4 = "172.21.6.103"; });
|
|
|
|
NETWORK_INTERFACES :
|
|
{
|
|
GNB_IPV4_ADDRESS_FOR_NG_AMF = "172.21.18.20";
|
|
GNB_IPV4_ADDRESS_FOR_NGU = "172.21.18.20";
|
|
GNB_PORT_FOR_S1U = 2152; # Spec 2152
|
|
};
|
|
}
|
|
);
|
|
|
|
MACRLCs = (
|
|
{
|
|
num_cc = 1;
|
|
tr_s_preference = "local_L1";
|
|
tr_n_preference = "local_RRC";
|
|
pusch_TargetSNRx10 = 200;
|
|
pucch_TargetSNRx10 = 250;
|
|
pusch_FailureThres = 100;
|
|
}
|
|
);
|
|
|
|
L1s = (
|
|
{
|
|
num_cc = 1;
|
|
tr_n_preference = "local_mac";
|
|
prach_dtx_threshold = 130
|
|
pucch0_dtx_threshold = 80;
|
|
pusch_dtx_threshold = -100;
|
|
tx_amp_backoff_dB = 3;
|
|
L1_rx_thread_core = 3;
|
|
L1_tx_thread_core = 4;
|
|
phase_compensation = 0; # needs to match O-RU configuration
|
|
}
|
|
);
|
|
|
|
RUs = (
|
|
{
|
|
local_rf = "no";
|
|
nb_tx = 4;
|
|
nb_rx = 4;
|
|
att_tx = 0;
|
|
att_rx = 0;
|
|
bands = [77];
|
|
max_pdschReferenceSignalPower = -27;
|
|
max_rxgain = 75;
|
|
sf_extension = 0;
|
|
eNB_instances = [0];
|
|
ru_thread_core = 5;
|
|
sl_ahead = 10;
|
|
tr_preference = "raw_if4p5"; # important: activate FHI7.2
|
|
do_precoding = 0; # needs to match O-RU configuration
|
|
}
|
|
);
|
|
|
|
security = {
|
|
# preferred ciphering algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nea0, nea1, nea2, nea3
|
|
ciphering_algorithms = ( "nea0" );
|
|
|
|
# preferred integrity algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nia0, nia1, nia2, nia3
|
|
integrity_algorithms = ( "nia2", "nia0" );
|
|
|
|
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
|
|
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
|
|
drb_ciphering = "yes";
|
|
drb_integrity = "no";
|
|
};
|
|
|
|
log_config :
|
|
{
|
|
global_log_level = "info";
|
|
hw_log_level = "info";
|
|
phy_log_level = "info";
|
|
mac_log_level = "info";
|
|
rlc_log_level = "info";
|
|
pdcp_log_level = "info";
|
|
rrc_log_level = "info";
|
|
ngap_log_level = "info";
|
|
f1ap_log_level = "info";
|
|
};
|
|
|
|
fhi_72 = {
|
|
dpdk_devices = ("0000:c3:11.0", "0000:c3:11.1");
|
|
dpdk_iova_mode = "VA";
|
|
system_core = 0;
|
|
io_core = 1;
|
|
worker_cores = (2);
|
|
ru_addr = ("98:ae:71:04:83:e3", "98:ae:71:04:83:e3");
|
|
mtu = 9600;
|
|
fh_config = ({
|
|
T1a_cp_dl = (285, 470);
|
|
T1a_cp_ul = (285, 429);
|
|
T1a_up = (125, 350);
|
|
Ta4 = (110, 180);
|
|
ru_config = {
|
|
iq_width = 9;
|
|
iq_width_prach = 9;
|
|
};
|
|
});
|
|
};
|