While testing the gNB with two hypotetical neighbors, some issues were found
with A3 event configuration.
The configuration of neighbors is:
neighbour_list = (
{
nr_cellid = 12345679L;
neighbour_cell_configuration = (
{
gNB_ID = 0xba0;
nr_cellid = 720898;
physical_cellId = 1;
absoluteFrequencySSB= 621312;
subcarrierSpacing = 1;
band = 78;
plmn = { mcc = 505; mnc = 01; mnc_length = 2 };
tracking_area_code = 1;
},
{
gNB_ID = 0xea0;
nr_cellid = 1345678L;
physical_cellId = 2;
absoluteFrequencySSB= 640000;
subcarrierSpacing = 1;
band = 78;
plmn = { mcc = 505; mnc = 01; mnc_length = 2 };
tracking_area_code = 1;
}
);
}
);
There were two problems.
The first problem is:
- when only default A3 event is configured, it is duplicated in the
RRC Reconfiguration Report Config To AddMod list with IDs 4 and 5
To test this case, the event configuration is:
nr_measurement_configuration = {
Periodical = {
enable = 1;
includeBeamMeasurements = 1;
maxNrofRS_IndexesToReport = 4;
};
A2 = {
enable = 1;
threshold = 60;
time_to_trigger = 1;
};
A3 = (
{
physCellId = -1;
offset = 15;
hysteresis = 2;
time_to_trigger = 3
}
);
};
The second problem is:
- when configuring an A3 event with an unknown physCellId, the gNB
does not include any A3 event in the RRC Reconfiguration Report
Config To AddMod list (which is correct), but configures some
meas ID with nonexistant Report Config IDs
To test this case, the event configuration is:
nr_measurement_configuration = {
Periodical = {
enable = 1;
includeBeamMeasurements = 1;
maxNrofRS_IndexesToReport = 4;
};
A2 = {
enable = 1;
threshold = 60;
time_to_trigger = 1;
};
A3 = (
{
physCellId = 10;
offset = 15;
hysteresis = 2;
time_to_trigger = 3
}
);
};
Reworking A3 event configuration as done in this commit solves both
issues.
Cedric Roux
ac535b6338