Cedric Roux
9456fe584a
This commit introduces X2AP timers (t_reloc_prep, tx2_reloc_overall). You need to set the values in the configuration file. X2AP can be enabled or disabled in the configuration file too (disabled by default). Some deadcode was removed.
58 lines
1.7 KiB
Plaintext
58 lines
1.7 KiB
Plaintext
Active_eNBs = ( "eNB_Eurecom_LTEBox");
|
|
# Asn1_verbosity, choice in: none, info, annoying
|
|
Asn1_verbosity = "none";
|
|
|
|
eNBs =
|
|
(
|
|
{
|
|
////////// Identification parameters:
|
|
hard_real_time = "yes";
|
|
eNB_ID = 0xe00;
|
|
|
|
cell_type = "CELL_MACRO_ENB";
|
|
|
|
eNB_name = "eNB_Eurecom_LTEBox";
|
|
|
|
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
|
tracking_area_code = 15;
|
|
plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
|
|
|
|
////////// Channel parameters:
|
|
// Default Paging DRX of the eNB as defined in TS 36.304
|
|
default_paging_drx = "PAGING_DRX_256";
|
|
|
|
////////// Physical parameters:
|
|
frame_type = "FDD";
|
|
prefix_type = "NORMAL";
|
|
eutra_band = 7;
|
|
downlink_frequency = 2680000000L;
|
|
uplink_frequency_offset = -120000000;
|
|
|
|
////////// MME parameters:
|
|
mme_ip_address = ( { ipv4 = "192.168.13.11";
|
|
ipv6 = "192:168:30::17";
|
|
active = "yes";
|
|
preference = "ipv4";
|
|
}
|
|
);
|
|
|
|
///X2
|
|
enable_x2 = "no";
|
|
t_reloc_prep = 1000; /* unit: millisecond */
|
|
tx2_reloc_overall = 2000; /* unit: millisecond */
|
|
|
|
NETWORK_INTERFACES :
|
|
{
|
|
ENB_INTERFACE_NAME_FOR_S1_MME = "eth1";
|
|
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24";
|
|
|
|
ENB_INTERFACE_NAME_FOR_S1U = "eth1";
|
|
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24";
|
|
|
|
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.13.10/24";
|
|
ENB_PORT_FOR_X2C = 36422; # Spec 36422
|
|
};
|
|
|
|
}
|
|
);
|