Teodora
3a1fc2ef65
1. Closes #884 - increase the XRAN_MAX_FRAGMENT from 4 to 6 (sufficient for MTU 1500 with compression 8b) 2. Add new firmware version that supports jumbo frames 3. Update the config file to align with the new Liteon unit in our lab - center frequency, jumbo frames, compression and RU MAC address, as well as the max DL MIMO layers.
276 lines
9.3 KiB
Plaintext
276 lines
9.3 KiB
Plaintext
Active_gNBs = ( "gNB-OAI");
|
|
# Asn1_verbosity, choice in: none, info, annoying
|
|
Asn1_verbosity = "none";
|
|
|
|
gNBs =
|
|
(
|
|
{
|
|
////////// Identification parameters:
|
|
gNB_ID = 0xe00;
|
|
gNB_name = "gNB-OAI";
|
|
|
|
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
|
tracking_area_code = 1;
|
|
plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ( { sst = 1; }); });
|
|
|
|
nr_cellid = 1;
|
|
|
|
////////// Physical parameters:
|
|
|
|
pdsch_AntennaPorts_XP = 2;
|
|
pdsch_AntennaPorts_N1 = 2;
|
|
maxMIMO_layers = 4;
|
|
pusch_AntennaPorts = 4;
|
|
do_CSIRS = 1;
|
|
do_SRS = 0;
|
|
sib1_tda = 15;
|
|
|
|
servingCellConfigCommon = (
|
|
{
|
|
#spCellConfigCommon
|
|
|
|
physCellId = 0;
|
|
# n_TimingAdvanceOffset = 0;
|
|
# downlinkConfigCommon
|
|
#frequencyInfoDL
|
|
# center frequency = 3350.01 MHz
|
|
# selected SSB frequency = 3349.92 MHz
|
|
absoluteFrequencySSB = 623328;
|
|
dl_frequencyBand = 78;
|
|
# frequency point A = 3300.87 MHz
|
|
dl_absoluteFrequencyPointA = 620058;
|
|
#scs-SpecificCarrierList
|
|
dl_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
dl_subcarrierSpacing = 1;
|
|
dl_carrierBandwidth = 273;
|
|
#initialDownlinkBWP
|
|
#genericParameters
|
|
initialDLBWPlocationAndBandwidth = 1099; #38.101-1 Table 5.3.2-1
|
|
#
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialDLBWPsubcarrierSpacing = 1;
|
|
#pdcch-ConfigCommon
|
|
initialDLBWPcontrolResourceSetZero = 11;
|
|
initialDLBWPsearchSpaceZero = 0;
|
|
|
|
#uplinkConfigCommon
|
|
#frequencyInfoUL
|
|
ul_frequencyBand = 78;
|
|
#scs-SpecificCarrierList
|
|
ul_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
ul_subcarrierSpacing = 1;
|
|
ul_carrierBandwidth = 273;
|
|
pMax = 23;
|
|
#initialUplinkBWP
|
|
#genericParameters
|
|
initialULBWPlocationAndBandwidth = 1099;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialULBWPsubcarrierSpacing = 1;
|
|
#rach-ConfigCommon
|
|
#rach-ConfigGeneric
|
|
prach_ConfigurationIndex = 159;
|
|
#prach_msg1_FDM
|
|
#0 = one, 1=two, 2=four, 3=eight
|
|
prach_msg1_FDM = 0;
|
|
prach_msg1_FrequencyStart = 22;
|
|
zeroCorrelationZoneConfig = 15;
|
|
preambleReceivedTargetPower = -104;
|
|
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
|
|
preambleTransMax = 7;
|
|
#powerRampingStep
|
|
# 0=dB0,1=dB2,2=dB4,3=dB6
|
|
powerRampingStep = 2;
|
|
#ra_ReponseWindow
|
|
#1,2,4,8,10,20,40,80
|
|
ra_ResponseWindow = 5;
|
|
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
|
|
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
|
|
#one (0..15) 4,8,12,16,...60,64
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
|
|
#ra_ContentionResolutionTimer
|
|
#(0..7) 8,16,24,32,40,48,56,64
|
|
ra_ContentionResolutionTimer = 7;
|
|
rsrp_ThresholdSSB = 19;
|
|
#prach-RootSequenceIndex_PR
|
|
#1 = 839, 2 = 139
|
|
prach_RootSequenceIndex_PR = 2;
|
|
prach_RootSequenceIndex = 1;
|
|
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
|
|
#
|
|
msg1_SubcarrierSpacing = 1,
|
|
# restrictedSetConfig
|
|
# 0=unrestricted, 1=restricted type A, 2=restricted type B
|
|
restrictedSetConfig = 0,
|
|
|
|
# this is the offset between the last PRACH preamble power and the Msg3 PUSCH, 2 times the field value in dB
|
|
msg3_DeltaPreamble = 2;
|
|
p0_NominalWithGrant = -96;
|
|
|
|
# pucch-ConfigCommon setup :
|
|
# pucchGroupHopping
|
|
# 0 = neither, 1= group hopping, 2=sequence hopping
|
|
pucchGroupHopping = 0;
|
|
hoppingId = 0;
|
|
p0_nominal = -96;
|
|
|
|
ssb_PositionsInBurst_Bitmap = 0x1;
|
|
|
|
# ssb_periodicityServingCell
|
|
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
|
|
ssb_periodicityServingCell = 2;
|
|
|
|
# dmrs_TypeA_position
|
|
# 0 = pos2, 1 = pos3
|
|
dmrs_TypeA_Position = 0;
|
|
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
subcarrierSpacing = 1;
|
|
|
|
|
|
#tdd-UL-DL-ConfigurationCommon
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
referenceSubcarrierSpacing = 1;
|
|
# pattern1
|
|
# dl_UL_TransmissionPeriodicity
|
|
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
|
|
dl_UL_TransmissionPeriodicity = 5;
|
|
nrofDownlinkSlots = 3;
|
|
nrofDownlinkSymbols = 6;
|
|
nrofUplinkSlots = 1;
|
|
nrofUplinkSymbols = 4;
|
|
|
|
ssPBCH_BlockPower = 0;
|
|
}
|
|
);
|
|
|
|
|
|
# ------- SCTP definitions
|
|
SCTP :
|
|
{
|
|
# Number of streams to use in input/output
|
|
SCTP_INSTREAMS = 2;
|
|
SCTP_OUTSTREAMS = 2;
|
|
};
|
|
|
|
|
|
////////// AMF parameters:
|
|
amf_ip_address = ({ ipv4 = "172.21.6.5"; });
|
|
|
|
NETWORK_INTERFACES :
|
|
{
|
|
GNB_IPV4_ADDRESS_FOR_NG_AMF = "172.21.16.51";
|
|
GNB_IPV4_ADDRESS_FOR_NGU = "172.21.16.51";
|
|
GNB_PORT_FOR_S1U = 2152; # Spec 2152
|
|
};
|
|
}
|
|
);
|
|
|
|
MACRLCs = (
|
|
{
|
|
num_cc = 1;
|
|
tr_s_preference = "local_L1";
|
|
tr_n_preference = "local_RRC";
|
|
pusch_TargetSNRx10 = 200;
|
|
pucch_TargetSNRx10 = 200;
|
|
# dl_bler_target_upper = .35;
|
|
# dl_bler_target_lower = .15;
|
|
ul_bler_target_upper = .35;
|
|
ul_bler_target_lower = .15;
|
|
pusch_FailureThres = 100;
|
|
}
|
|
);
|
|
|
|
L1s = (
|
|
{
|
|
num_cc = 1;
|
|
tr_n_preference = "local_mac";
|
|
prach_dtx_threshold = 130
|
|
pucch0_dtx_threshold = 80;
|
|
pusch_dtx_threshold = 10;
|
|
tx_amp_backoff_dB = 20; # needs to match O-RU configuration
|
|
L1_rx_thread_core = 8;
|
|
L1_tx_thread_core = 10;
|
|
phase_compensation = 1; # needs to match O-RU configuration
|
|
}
|
|
);
|
|
|
|
RUs = (
|
|
{
|
|
local_rf = "no";
|
|
nb_tx = 4;
|
|
nb_rx = 4;
|
|
att_tx = 0;
|
|
att_rx = 0;
|
|
bands = [78];
|
|
max_pdschReferenceSignalPower = -27;
|
|
max_rxgain = 75;
|
|
sf_extension = 0;
|
|
eNB_instances = [0];
|
|
ru_thread_core = 9;
|
|
sl_ahead = 5;
|
|
tr_preference = "raw_if4p5"; # important: activate FHI7.2
|
|
do_precoding = 0; # needs to match O-RU configuration
|
|
}
|
|
);
|
|
|
|
security = {
|
|
# preferred ciphering algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nea0, nea1, nea2, nea3
|
|
ciphering_algorithms = ( "nea0" );
|
|
|
|
# preferred integrity algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nia0, nia1, nia2, nia3
|
|
integrity_algorithms = ( "nia2", "nia0" );
|
|
|
|
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
|
|
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
|
|
drb_ciphering = "yes";
|
|
drb_integrity = "no";
|
|
};
|
|
|
|
log_config :
|
|
{
|
|
global_log_level = "info";
|
|
hw_log_level = "info";
|
|
phy_log_level = "info";
|
|
mac_log_level = "info";
|
|
rlc_log_level = "info";
|
|
pdcp_log_level = "info";
|
|
rrc_log_level = "info";
|
|
ngap_log_level = "info";
|
|
f1ap_log_level = "info";
|
|
};
|
|
|
|
fhi_72 = {
|
|
dpdk_devices = ("0000:c1:11.0", "0000:c1:11.1"); # one VF can be used as well
|
|
system_core = 0;
|
|
io_core = 1;
|
|
worker_cores = (2);
|
|
ru_addr = ("e8:c7:4f:25:81:b3", "e8:c7:4f:25:81:b3");
|
|
mtu = 9600; # note: 1500 works as well, with both E and F releases
|
|
fh_config = ({
|
|
T1a_cp_dl = (285, 429);
|
|
T1a_cp_ul = (285, 429);
|
|
T1a_up = (96, 196);
|
|
Ta4 = (110, 180);
|
|
ru_config = {
|
|
iq_width = 9;
|
|
iq_width_prach = 9;
|
|
};
|
|
prach_config = {
|
|
kbar = 0;
|
|
};
|
|
});
|
|
};
|