Robert Schmidt
41d14b571c
Since the parent commit, the ra_ResponseWindow will be chosen automatically. Correspondingly, remove most ra_ResponseWindow options from configuration files in the repository. One problem in some mu=1 configs is that the ra_ResponseWindow=4 (10 slots), which might be overly restrictive if the L1 slot ahead is somewhat close to 10 (e.g., 6), in which case we might not be always able to allocate Msg2 in time. A notable exception here is gnb-vnf.sa.band66.u0.25prb.nfapi.conf, in which we still provide it (1) since it uses a non-standard configuration of a ra_ResponseWindow longer than 10ms (see also issue #916 for more information) and (2) as an example.
231 lines
8.2 KiB
Plaintext
231 lines
8.2 KiB
Plaintext
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
|
|
# Asn1_verbosity, choice in: none, info, annoying
|
|
Asn1_verbosity = "none";
|
|
|
|
gNBs =
|
|
(
|
|
{
|
|
////////// Identification parameters:
|
|
gNB_ID = 0xe00;
|
|
|
|
cell_type = "CELL_MACRO_GNB";
|
|
|
|
gNB_name = "gNB-Eurecom-5GNRBox";
|
|
|
|
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
|
tracking_area_code = 1;
|
|
|
|
plmn_list = ({mcc = 208; mnc = 93; mnc_length = 2;});
|
|
|
|
tr_s_preference = "local_mac"
|
|
|
|
////////// Physical parameters:
|
|
|
|
servingCellConfigCommon = (
|
|
{
|
|
#spCellConfigCommon
|
|
|
|
physCellId = 0;
|
|
|
|
# downlinkConfigCommon
|
|
#frequencyInfoDL
|
|
# this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP), points to Subcarrier 0 of RB#10 of SSB block
|
|
absoluteFrequencySSB = 641032;
|
|
dl_frequencyBand = 78;
|
|
# this is 3600 MHz
|
|
dl_absoluteFrequencyPointA = 640000;
|
|
#scs-SpecificCarrierList
|
|
dl_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
dl_subcarrierSpacing = 1;
|
|
dl_carrierBandwidth = 106;
|
|
#initialDownlinkBWP
|
|
#genericParameters
|
|
# this is RBstart=33 (Start RB of SSB block),L=24 (275*(L-1))+RBstart
|
|
initialDLBWPlocationAndBandwidth = 6358; #6368;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialDLBWPsubcarrierSpacing = 1;
|
|
#pdcch-ConfigCommon
|
|
initialDLBWPcontrolResourceSetZero = 0; #12;
|
|
initialDLBWPsearchSpaceZero = 0;
|
|
|
|
#uplinkConfigCommon
|
|
#frequencyInfoUL
|
|
ul_frequencyBand = 78;
|
|
#scs-SpecificCarrierList
|
|
ul_offstToCarrier = 0;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
ul_subcarrierSpacing = 1;
|
|
ul_carrierBandwidth = 106;
|
|
pMax = 20;
|
|
#initialUplinkBWP
|
|
#genericParameters
|
|
initialULBWPlocationAndBandwidth = 6358;#6368;
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
initialULBWPsubcarrierSpacing = 1;
|
|
#rach-ConfigCommon
|
|
#rach-ConfigGeneric
|
|
prach_ConfigurationIndex = 98;
|
|
#prach_msg1_FDM
|
|
#0 = one, 1=two, 2=four, 3=eight
|
|
prach_msg1_FDM = 0;
|
|
prach_msg1_FrequencyStart = 0;
|
|
zeroCorrelationZoneConfig = 13;
|
|
preambleReceivedTargetPower = -118;
|
|
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
|
|
preambleTransMax = 6;
|
|
#powerRampingStep
|
|
# 0=dB0,1=dB2,2=dB4,3=dB6
|
|
powerRampingStep = 1;
|
|
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
|
|
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
|
|
#one (0..15) 4,8,12,16,...60,64
|
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
|
|
#ra_ContentionResolutionTimer
|
|
#(0..7) 8,16,24,32,40,48,56,64
|
|
ra_ContentionResolutionTimer = 7;
|
|
rsrp_ThresholdSSB = 19;
|
|
#prach-RootSequenceIndex_PR
|
|
#1 = 839, 2 = 139
|
|
prach_RootSequenceIndex_PR = 2;
|
|
prach_RootSequenceIndex = 1;
|
|
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
|
|
#
|
|
msg1_SubcarrierSpacing = 1,
|
|
# restrictedSetConfig
|
|
# 0=unrestricted, 1=restricted type A, 2=restricted type B
|
|
restrictedSetConfig = 0,
|
|
|
|
msg3_DeltaPreamble = 1;
|
|
p0_NominalWithGrant =-90;
|
|
|
|
# pucch-ConfigCommon setup :
|
|
# pucchGroupHopping
|
|
# 0 = neither, 1= group hopping, 2=sequence hopping
|
|
pucchGroupHopping = 0;
|
|
hoppingId = 40;
|
|
p0_nominal = -90;
|
|
|
|
ssb_PositionsInBurst_Bitmap = 0x1;
|
|
|
|
# ssb_periodicityServingCell
|
|
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
|
|
ssb_periodicityServingCell = 2;
|
|
|
|
# dmrs_TypeA_position
|
|
# 0 = pos2, 1 = pos3
|
|
dmrs_TypeA_Position = 0;
|
|
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
subcarrierSpacing = 1;
|
|
|
|
|
|
#tdd-UL-DL-ConfigurationCommon
|
|
# subcarrierSpacing
|
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
referenceSubcarrierSpacing = 1;
|
|
# pattern1
|
|
# dl_UL_TransmissionPeriodicity
|
|
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
|
|
dl_UL_TransmissionPeriodicity = 6;
|
|
nrofDownlinkSlots = 7;
|
|
nrofDownlinkSymbols = 6;
|
|
nrofUplinkSlots = 2;
|
|
nrofUplinkSymbols = 4;
|
|
|
|
ssPBCH_BlockPower = -25;
|
|
}
|
|
|
|
);
|
|
|
|
|
|
# ------- SCTP definitions
|
|
SCTP :
|
|
{
|
|
# Number of streams to use in input/output
|
|
SCTP_INSTREAMS = 2;
|
|
SCTP_OUTSTREAMS = 2;
|
|
};
|
|
|
|
|
|
////////// MME parameters:
|
|
mme_ip_address = ({ ipv4 = "192.168.12.26"; });
|
|
|
|
NETWORK_INTERFACES :
|
|
{
|
|
|
|
GNB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
|
|
GNB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
|
|
GNB_PORT_FOR_S1U = 2152; # Spec 2152
|
|
};
|
|
}
|
|
);
|
|
|
|
MACRLCs = (
|
|
{
|
|
num_cc = 1;
|
|
tr_s_preference = "local_L1";
|
|
tr_n_preference = "local_RRC";
|
|
}
|
|
);
|
|
|
|
L1s = (
|
|
{
|
|
num_cc = 1;
|
|
tr_n_preference = "local_mac";
|
|
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
|
|
}
|
|
);
|
|
|
|
RUs = (
|
|
{
|
|
local_rf = "yes"
|
|
nb_tx = 4
|
|
nb_rx = 1
|
|
att_tx = 0
|
|
att_rx = 0;
|
|
bands = [7];
|
|
max_pdschReferenceSignalPower = -27;
|
|
max_rxgain = 50;
|
|
eNB_instances = [0];
|
|
sdr_addrs = "addr=192.168.10.2,mgmt_addr=192.168.10.2,second_addr=192.168.20.2";
|
|
clock_src = "external";
|
|
}
|
|
);
|
|
|
|
|
|
security = {
|
|
# preferred ciphering algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nea0, nea1, nea2, nea3
|
|
ciphering_algorithms = ( "nea0" );
|
|
|
|
# preferred integrity algorithms
|
|
# the first one of the list that an UE supports in chosen
|
|
# valid values: nia0, nia1, nia2, nia3
|
|
integrity_algorithms = ( "nia2", "nia0" );
|
|
|
|
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
|
|
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
|
|
drb_ciphering = "yes";
|
|
drb_integrity = "no";
|
|
};
|
|
|
|
log_config :
|
|
{
|
|
global_log_level ="info";
|
|
hw_log_level ="info";
|
|
phy_log_level ="info";
|
|
mac_log_level ="info";
|
|
rlc_log_level ="info";
|
|
pdcp_log_level ="info";
|
|
rrc_log_level ="info";
|
|
};
|
|
|