openairinterface5g

Files

T

Cedric Roux c5ca2bd862 hotfix: clear DCI padding bits

The problem is the following (as reported by an user):

  "one UE is attached to OAI system. UE is near the antenna. Try to detach
  the UE and attach again. Repeat this procedure for 5-6 times. OAI system
  does not work and any the UE can not attach to this system. I use TEMS
  software and I can see MIB signaling on this UE but UE can not decode SIB1
  and SIB2."

What happens is that the DCI for SIB1 and SIB2 is not cleared before
use. That is the bits in the 'padding' field keep the values that were
set before. If the structure has been used to transmit other DCIs
(eg. for UEs) in the past, it may be reused with some of those bits set
to 1. When receiving this DCI, the UE won't accept it because it
gets some bits at 1 where it expects them to be 0.

The short-term/quick solution is to clear the 'padding' field.
A better solution would be to rewrite this part of the code,
which is way too complicated for what it does. But this takes
too much time.

In dci.h the field 'dummy' of some structures was renamed to 'padding'.
The fields 'padding32' and 'padding64' were also renamed to 'padding'
for consistency.

Some structures (DCI2B_1_5MHz_TDD, DCI2B_10MHz_FDD, DCI2D_1_5MHz_FDD,
DCI2D_5MHz_FDD, DCI2D_10MHz_FDD) had a 'padding' field at the end, which
was renamed to 'padding0'. I don't know if this field should be here at all.
To me this field looks very suspicious. When we test DCIs 2B and 2D we
should be careful.

2018-01-03 11:19:54 +01:00

PHY

hotfix: clear DCI padding bits

2018-01-03 11:19:54 +01:00

SCHED

bugfix in phy_procedures_lte_ue

2017-11-30 11:45:33 +01:00

SIMULATION

Merge remote-tracking branch 'origin/update-license' into RU-RAU-split

2017-10-23 15:00:30 +02:00

Makefile

merges from branch regarding openair1

2015-04-10 13:30:16 +00:00

README.TXT

update readme files

2017-04-08 17:20:32 +02:00

README.TXT

This folder contains the software for the device driver of CBMIMO1 and the physical layer signal processing.

|-- PHY			   // contains all signal processing related to physical layer (used in real-time AND simulation)

General remarks: every directory contains at least defs.h (for declaration of structure and functions), vars.h (for definitions of variables), and extern.h (variables are defined only once in cbmimo1_device.c (for real-time HW operation) or a top-level simulation (in SIMULATION/xxx), if variables are needed in another file, use extern.h)

|   |-- CODING		   // turbo and convolutional (de-)coders, rate-matching, crc generation (implementation of 36-212)
|   |   `-- TESTBENCH      // This contains unitary testbenches for the different channel coders/decoders
|   |-- INIT		   // variables defined in vars.h are initialzed here (memory allocation)
|   |-- LTE_ESTIMATION     // estimation for LTE
|   |-- LTE_REFSIG 	   // reference signals for LTE (sync and pilot sequences) reference signals from 36-211 
|   |-- LTE_TRANSPORT      // these are the top level routines for different transport and physical channels (for example DL-SCH, PSS) implements a subset of 36-211,36-212
|   |-- MODULATION	   // modulation and demodulation includes FFT/SC-FDMA front-end processing from 36-211
|   |-- TOOLS		   // tools like (I)FFT, vector operations, matrix multiplication, etc.
|   |   `-- FFTTEST        // unitary testbench for FFT routines
|   |-- defs.h		  // top level defs.h (includes spec_defs, impl_defs and all defs.h of subdirectories)
|   |-- extern.h
|   |-- impl_defs.h       // non-LTE openair implementation
|   |-- impl_defs_lte.h   // lte implementation
|   |-- impl_defs_top.h   // general implementaion defs
|   |-- spec_defs.h
|   |-- spec_defs_top.h
|   |-- types.h
|   `-- vars.h		  
|-- SCHED		  // schedules the different PHY functions according to the nodes role 
|   |-- defs.h
|   |-- extern.h
|   |-- phy_procedures_emos.c    // non-LTE PHY procedures for EMOS
|   |-- phy_procedures_emos.h
|   |-- phy_procedures_lte_eNb.c // LTE PHY procedures for eNB (from 36-213) 
|   |-- phy_procedures_lte_ue.c  // LTE PHY procedures for UE (from 36-213)
|   |-- phy_procedures_lte_common.c  // LTE PHY procedures common for UE and eNB (from 36-213)
|   |-- phy_mac_stub.c  //MAC stub that generates channels when used in phy-test-mode
|   |-- pucch_pc.c // power control for PUCCH
|   |-- pusch_pc.c // power control for PUSCH
|   |-- srs_pc.c // power control for SRS
|   |-- rt_compat.h
|   `-- vars.h
|-- SIMULATION		 // contains simulation routines to test PHY
|   |-- LTE_PHY          // LTE simulation testbenches for unitary simulation of transport/physical channels
|   |   |-- pbchsim.c       // PBCH simulation testbench
|   |   |-- pdcchsim.c      // PCFICH/PHICH/PDCCH (DCI) simulation testbench
|   |   |-- dlsim.c         // PDSCH simulation testbench
|   |   |-- ulsim.c         // PUSCH simulation testbench
|   |   |-- pucchsim.c      // PUCCH simulation testbench
|   |-- RF
|   |-- ETH_TRANSPORT
|   `-- TOOLS