batuhan duyuler
cec6b8925a
- neighbour_config.conf file includes neighbour and measurement related parameters
Neighbour List:
- nr_cellid: the identity of existing cell who has neighbour
- neighbour_cell_configuration(list): includes the identity parameters
of the neighbour cell such:
- gNBID (incase of N2 Handover / to be identified from AMF)
- nr_cell_id (target gNB needs to consider)
- physical_cellId (needed for measurement reporting)
- absoluteFrequencySSB (needed for measurement reporting)
- subcarrierSpacing (needed for measurement reporting)
- plmn / tracking area code (incase of N2 Handover / needed for AMF
to identify / allow HO)
NR Measurement Configuration
- Periodical
- enable (default is 0, 1 enables the reporting)
- includeBeamMeasurements, maxNrOfRS_IndexesToReport (configurable
reporting parameters)
- A2
- enable (default is 0, 1 enables the reporting)
- threshold , timeToTrigger (configurable reporting parameters)
- A3
- cell_id (the nr_cellid of neighbour cell. So this A3 parameters
will be used for the neighbour
- [-1] means default. so it can be applied to any neighbour if
there is no specific config
- Neighbour specific A3 Threshold can be used or default can be
selected depending to the neighbour planning
- The neighbour-config.conf specifies, apply default A3 for
neighbours 3 and 4 | apply specific one for neighbour 2
- offset, hysteresis, timeToTrigger (configurable reporting parameters)
the neighbour_config.conf can be included in the gNB.conf file. Example
is given: gnb.sa.band78.106prb.rfsim.neighbour.conf
A sequence array container is used for neighbour cell configuration. RRC
structure has this container. A Measurement configuration structure is
defined. This structure has Periodical / A2 Event structures and also a
sequence container for A3 Event List.
These structures are filled during the initialization. While F1 Setup
Response is coming from DU to CU, the intra frequency / inter frequency
neighbour decision is given for the existing cell. Also new neighbours
could be added here if needed.
Configuration files: naming style guide
The configuration files should have the following name format:
<type>[.<sa|nsa>][.band<num>.[u<num>.]<num>prb].<sdr>[.<opt>].conf
Where:
[]means this field is optional<type>: one ofgnb,enb,gnb-cu,gnb-du,nrue,lteue, etc.<sa|nsa>: in the case of 5G, notes whether this is SA or NSA<num>forband/u/prb: numerical value. Note that band/PRB are only applicable in some cases. The numerologyuis only to be set for 5G if it differs fromu1.<sdr>: what SDR board/split this is tailored for:- e.g.,
usrpb210,usrpn310,rfsim,aw2s - if there is no SDR (e.g., for a CU), use the south-bound split, e.g.,
f1,if4p5, etc. - for the L2simulator, write
l2sim
- e.g.,
<opt>: optional specifiers. If there are multiple, concatenated using a dash (-). Examples:2x2prs(positioning reference signal)ddsuu(specific TDD pattern)tm2: Transmission Mode 2 in 4Goaiue: specifies usage with OAI UE and not COTS UE
Examples:
- standard monolithic gNB, 2x2 configuration, with SDAP:
gnb.sa.band78.162prb.usrpn310.2x2-sdap.conf - gNB-CU:
gnb-cu.sa.f1.conf - monolithic gNB, L2sim:
gnb.sa.band77.106prb.l2sim.conf - monolithic eNB:
enb.band7.25prb.usrpb200.conf - RCC (4G eNB with IF4.5 split):
enb-rcc.band7.25prb.tm1.if4p5.conf
Notes:
- there is no need for TDD/FDD, this is encoded in the band number
- there is no need for FR1/FR2, this is encoded in the band number