Files
openairinterface5g/targets/TEST/OAI/case12.py
T

144 lines
6.1 KiB
Python

#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
# \file case02.py
# \brief test case 02 for OAI: executions
# \author Navid Nikaein
# \date 2013
# \version 0.1
# @ingroup _test
import time
import random
import log
import openair
import core
import os
import shutil # copy file
NUM_UE=1
NUM_eNB=1
NUM_TRIALS=3
PRB=[25,50,100]
MCS=[0,4,9,10,13,16,17,22,27]
#PRB=[100]
#MCS=[27]
#SNR=[0,0,0,0,0,0,0,0,0]
ANT_TX=2 # 2
ANT_RX=2 # 2
PDCCH=2 #, 2, 3, 4
CHANNEL=["N"]
#CHANNEL=["C","E","F","G","H","I","L","M"]
TX_MODE=2 # 2,
MIN_SNR=0
MAX_SNR=40
PERF=75
OPT="-L"
FRAME=2000
#OPT="-L -d" # 8bit decoder , activate dci decoding at UE
def execute(oai, user, pw, host, logfile,logdir,debug,cpu):
case = '10'
oai.send('cd $OPENAIR1_DIR;')
oai.send('cd SIMULATION/LTE_PHY;')
try:
log.start()
test = '200'
name = 'Run oai.dlsim.sanity'
conf = '-a -n 100'
diag = 'dlsim is not running normally (Segmentation fault / Exiting / FATAL), debugging might be needed'
trace = logdir + '/log_' + host + case + test + '_1.txt;'
tee = ' 2>&1 | tee ' + trace
oai.send_expect_false('./dlsim.rel8.'+ host + ' ' + conf + tee, 'Segmentation fault', 30)
trace = logdir + '/log_' + host + case + test + '_2.txt;'
tee = ' 2>&1 | tee ' + trace
oai.send_expect_false('./dlsim.rel8.'+ host + ' ' + conf + tee, 'Exiting', 30)
trace = logdir + '/log_' + host + case + test + '_3.txt;'
tee = ' 2>&1 | tee ' + trace
oai.send_expect_false('./dlsim.rel8.'+ host + ' ' + conf + tee, 'FATAL', 30)
except log.err, e:
log.fail(case, test, name, conf, e.value, diag, logfile,trace)
else:
log.ok(case, test, name, conf, '', logfile)
try:
log.start()
test = 210
name = 'Run oai.dlsim.perf.'+str(PERF)+'%'
diag = 'no diagnostic is available, check the log file'
for i in range(len(PRB)):
for o in range(len(CHANNEL)):
MIN_SNR = 0
for j in range(len(MCS)):
for k in range(1,ANT_TX):
for m in range (1,ANT_RX):
for n in range(1,PDCCH):
for p in range(1,TX_MODE):
for q in range(MIN_SNR,MAX_SNR):
#if if PRB[i] :
conf = '-B' + str(PRB[i]) + ' -m'+str(MCS[j]) + ' -y'+str(k) + ' -z'+str(m) +' -c'+str(n) + ' -g'+str(CHANNEL[o]) + ' -x'+str(p) + ' -s'+str(q) + ' -w1.0 -f.1 -P -n'+str(FRAME)+' -O'+str(PERF) +' '+ OPT
trace = logdir + '/time_meas' + '_prb'+str(PRB[i])+'_mcs'+ str(MCS[j])+ '_anttx' + str(k)+ '_antrx' + str(m) + '_pdcch' + str(n) + '_channel' +str(CHANNEL[o]) + '_tx' +str(p) + '_snr' +str(q)+'.'+case+str(test)+ '.log'
tee = ' 2>&1 | tee ' + trace
if cpu > -1 :
cmd = 'taskset -c '+ str(cpu) + ' ./dlsim.rel8.'+ host + ' ' + conf + tee
else :
cmd = './dlsim.rel8.'+ host + ' ' + conf + tee
if debug :
print cmd
match = oai.send_expect_re(cmd, 'passed', 0, 1000)
if match :
#SNR[j]=q
log.ok(case, str(test), name, conf, '', logfile)
MIN_SNR = q -1 # just to speed up the test
test+=1
break # found the smallest snr
else :
if q == MAX_SNR -1 :
log.skip(case,str(test), name, conf,'','',logfile)
test+=1
break # do not remove the last log file
try:
if os.path.isfile(trace) :
os.remove(trace)
except OSError, e: ## if failed, report it back to the user ##
print ("Error: %s - %s." % (e.filename,e.strerror))
except log.err, e:
log.fail(case, str(test), name, conf, e.value, diag, logfile,trace)
#else:
# log.ok(case, test, name, conf, '', logfile)