Cedric Roux
56c66c09aa
Pre-ci test passed git-svn-id: http://svn.eurecom.fr/openair4G/trunk@4000 818b1a75-f10b-46b9-bf7c-635c3b92a50f
51 lines
2.4 KiB
Bash
Executable File
51 lines
2.4 KiB
Bash
Executable File
#!/bin/bash
|
|
|
|
source params.sh
|
|
sleep 1
|
|
|
|
export OPENAIR1_DIR
|
|
export OPENAIR2_DIR
|
|
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
|
|
#echo Launching AS and RF
|
|
#./start_openair.sh 8 8
|
|
|
|
echo Installing NASMESH Driver
|
|
sudo rmmod -f nasmesh
|
|
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
|
|
|
|
#sudo ifconfig eth2 10.0.1.3
|
|
sudo ifconfig nasmesh0 up
|
|
sudo ifconfig nasmesh0 10.0.0.3
|
|
sudo ip -6 addr add $MR1_IN6_ADDR/64 dev nasmesh0
|
|
|
|
echo Classification rules for MR1 - Default DTCH UL for L3 signaling
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR1_IN6_ADDR -y $CH1_IN6_ADDR -r 4
|
|
echo Classification rules for MR1 - MPLS User-plane Bearer
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN1_MR1_CH1_MN3 -m $MN3_CH1_MR1_MN1 -r 5
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
|
|
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 4
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 4
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 4
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 4
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 4
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 4
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 4
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 4
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 4
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 4
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 4
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 4
|
|
|
|
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
|
|
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
|
|
|
|
#echo Multicast state launched with config_mr1
|
|
#xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr1 &
|
|
|
|
#xterm -hold -e ./mac_sim -m0 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_3nodes.top &
|
|
|
|
|
|
|
|
|