Cedric Roux
56c66c09aa
Pre-ci test passed git-svn-id: http://svn.eurecom.fr/openair4G/trunk@4000 818b1a75-f10b-46b9-bf7c-635c3b92a50f
82 lines
2.4 KiB
Bash
82 lines
2.4 KiB
Bash
Cluster Head (2)– with NAS_MPLS_PMIP working
|
||
CH2_NAS.SH
|
||
#!/bin/bash
|
||
#Phil, 25 july 08
|
||
|
||
source params.sh
|
||
./ch2_conf_nas.sh
|
||
#MN1MN2
|
||
./ch2_mpls_nas.sh $MR2_CH2_LABEL_OUT $MR3_IN_ADDR $MR2_LABEL_IN
|
||
#MN2MN1
|
||
./ch_mpls_nas.sh $MR2_LABEL_OUT $MR2_IN_ADDR $MR2_CH2_LABEL_IN
|
||
echo /openair3/pmip6d/pmip6d -c -L $CH2_ADDR
|
||
/openair3/pmip6d/pmip6d -c -L $CH2_ADDR
|
||
./ch2_del_mpls.sh
|
||
CH2_CONF_NAS.SH
|
||
#!/bin/bash
|
||
|
||
source params.sh
|
||
echo Clusterhead address is $CH2_ADDR
|
||
|
||
# Installing NASMESH driver
|
||
rmmod -f nasmesh
|
||
insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
|
||
echo Classification rules for CH2
|
||
|
||
#CH2<-> MR2 IP Signaling
|
||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH2_ADDR -y $MR2_IN_ADDR -r 12
|
||
#CH<-> MR1 MPLS user-plane bearer
|
||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR2_CH2_LABEL_IN -m $MR2_CH2_LABEL_OUT -r 13
|
||
|
||
#CH2<-> MR3 (IP Signaling)
|
||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH2_ADDR -y $MR3_IN_ADDR -r 20
|
||
#CH2<-> MR3 (MPLS user-plane bearer)
|
||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_IN -m $MR3_LABEL_OUT -r 21
|
||
|
||
#CH2 Broadcast (transmission of Router ADV)
|
||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH2_ADDR -y ff02::1 -r 3
|
||
|
||
echo Configuring interfaces on CH2
|
||
# Setup IPv4 multicast route for openair emulation
|
||
route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
|
||
|
||
# Bring up openair NASMESH device and set IPv6 address
|
||
ifconfig nasmesh0 up
|
||
ip addr add 10.0.0.1/24 dev nasmesh0
|
||
ip -6 addr add $CH2_ADDR/64 dev nasmesh0
|
||
|
||
echo nasmesh0 is $CH2_ADDR
|
||
echo No MPLS debug
|
||
echo "0" >/sys/mpls/debug
|
||
sleep 1
|
||
echo Launching AS simulator
|
||
export OPENAIR2_DIR
|
||
xterm -hold -e sh start_openair2_ch2.sh &
|
||
sleep 1
|
||
|
||
|
||
CH2_MPLS_NAS.SH
|
||
#!/bin/bash
|
||
#Script by Lamia Romdhani
|
||
#June 2008
|
||
|
||
echo Setting MPLS for CH2
|
||
modprobe mpls6
|
||
|
||
echo Number of params = $#
|
||
if [ $# -eq 3 ]; then
|
||
LABEL_IN=$1
|
||
IP_NEXT_HOP=$2
|
||
LABEL_OUT=$3
|
||
|
||
echo "IP Next Hop is $IP_NEXT_HOP"
|
||
|
||
echo 'Starting mpls'
|
||
mpls labelspace set dev nasmesh0 labelspace 0
|
||
mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
|
||
var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
|
||
mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
|
||
else
|
||
echo usage: ch_mpls_dyntest_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
|
||
fi
|