0. Introduction
This directory involves the simulation of GN and FAC to test these interfaces.
1. Dependencies
Python packages should be installed.
2. Building
There is no build for this tool, it's plain Python which is interpreted rather
than to be built, see section 3. Running.
3. Commands
Following commands are supported.
3.1. DEFINE Command Family
3.1.1. DEFINE SERVER_ADDRESS <address>
Defines the destination address (i.e. the MGMT-CORE's address)
3.1.2. DEFINE SERVER_PORT <port>
Defines the destination port (i.e. the MGMT-CORE's port)
3.1.3. DEFINE CLIENT_PORT <port>
Defines the client's port (i.e. source port that is used to send the packets to MGMT-CORE from)
3.1.4. DEFINE CLIENT_TYPE <clientType>
Defines client type and can be 'GN', 'FAC', or 'LTE'
Packets sent will have relevant event types and sub-types based on this client type
3.2. SEND Command Family
3.2.1. SEND COMMUNICATION_PROFILE_REQUEST
Sends a COMMUNICATION_PROFILE_REQUEST packet to MGMT-CORE's given port
NOTICE: Client type has to be defined in advance for this command since event sub-type
changes from client to client for this packet
3.2.2. SEND NETWORK_STATE
Sends a NETWORK_STATE packet to MGMT-CORE's given port
3.2.3. SEND WIRELESS_STATE
Sends a WIRELESS_STATE_RESPONSE packet to MGMT-CORE's given port
NOTICE: Client type has to be defined in advance for this command since event sub-type
changes from client to client for this packet
3.2.4. SEND LOCATION_UPDATE
Sends a LOCATION_UPDATE to MGMT-CORE's given port
3.2.5. SEND CONFIGURATION_NOTIFICATION
Sends a CONFIGURATION_NOTIFICATION to MGMT-CORE's given port
3.2.6. SEND GET_CONFIGURATION
Sends a GET_CONFIGURATION to MGMT-CORE's given port
NOTICE: Client type has to be defined in advance for this command since event sub-type
changes from client to client for this packet
3.3. Util Command Family
3.2.1. WAIT Command
Makes the simulator wait for the specified amount of seconds
4. Running
Since this simulator has been written in Python you need to have the Python interpreter.
In order to run first scenario file, for example, issue the following command,
$ python main.py scenarios/01.sce
5. References
- Baris Demiray <baris.demiray@eurecom.fr>
Cedric Roux
56c66c09aa