maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
ef27c8ce04e44750120549e4e8f118ac67ce0fda
openairinterface5g/openair1/PHY/defs_nr_common.h
T

347 lines
10 KiB
C
Raw Blame History

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*! \file PHY/defs_nr_common.h
\brief Top-level defines and structure definitions
\author Guy De Souza
\date 2018
\version 0.1
\company Eurecom
\email: desouza@eurecom.fr
\note
\warning
*/
#ifndef __PHY_DEFS_NR_COMMON__H__
#define __PHY_DEFS_NR_COMMON__H__
#include "PHY/impl_defs_top.h"
#include "defs_common.h"
#include "nfapi_nr_interface.h"
#include "impl_defs_nr.h"
#include "PHY/CODING/nrPolar_tools/nr_polar_defs.h"
#define nr_subframe_t lte_subframe_t
#define nr_slot_t lte_subframe_t
#define MAX_NUM_SUBCARRIER_SPACING 5
#define NR_MAX_NB_RB 275
#define NR_NB_SC_PER_RB 12
#define NR_NB_REG_PER_CCE 6
#define NR_SYMBOLS_PER_SLOT 14
#define ONE_OVER_SQRT2_Q15 23170
#define ONE_OVER_TWO_Q15 16384
#define NR_MOD_TABLE_SIZE_SHORT 686
#define NR_MOD_TABLE_BPSK_OFFSET 1
#define NR_MOD_TABLE_QPSK_OFFSET 3
#define NR_MOD_TABLE_QAM16_OFFSET 7
#define NR_MOD_TABLE_QAM64_OFFSET 23
#define NR_MOD_TABLE_QAM256_OFFSET 87
#define NR_PSS_LENGTH 127
#define NR_SSS_LENGTH 127
#define NR_PBCH_DMRS_LENGTH 144 // in mod symbols
#define NR_PBCH_DMRS_LENGTH_DWORD 10 // ceil(2(QPSK)*NR_PBCH_DMRS_LENGTH/32)
/*These max values are for the gold sequences which are generated at init for the
* full carrier bandwidth*/
#define NR_MAX_PDCCH_DMRS_INIT_LENGTH ((NR_MAX_NB_RB<<1)*3) // 3 symbols *2(QPSK)
#define NR_MAX_PDCCH_DMRS_INIT_LENGTH_DWORD 52 // ceil(NR_MAX_PDCCH_DMRS_LENGTH/32)
/*used for the resource mapping*/
#define NR_MAX_PDCCH_DMRS_LENGTH 576 // 16(L)*2(QPSK)*3(3 DMRS symbs per REG)*6(REG per CCE)
#define NR_MAX_PDSCH_DMRS_LENGTH 3300 //275*6(k)*2(QPSK)
#define NR_MAX_PDSCH_DMRS_INIT_LENGTH_DWORD 104 // ceil(NR_MAX_PDSCH_DMRS_LENGTH/32)
#define NR_MAX_DCI_PAYLOAD_SIZE 64
#define NR_MAX_DCI_SIZE 1728 //16(L)*2(QPSK)*9(12 RE per REG - 3(DMRS))*6(REG per CCE)
#define NR_MAX_DCI_SIZE_DWORD 54 // ceil(NR_MAX_DCI_SIZE/32)
#define NR_MAX_NUM_BWP 4
#define NR_MAX_PDCCH_AGG_LEVEL 16
#define NR_MAX_CSET_DURATION 3
#define NR_MAX_NB_RBG 18
#define NR_MAX_NB_LAYERS 8 // SU-MIMO (3GPP TS 38.211 V15.4.0 section 7.3.1.3)
#define NR_MAX_NB_CODEWORDS 2
#define NR_MAX_NB_HARQ_PROCESSES 16
#define NR_MAX_PDSCH_ENCODED_LENGTH NR_MAX_NB_RB*NR_SYMBOLS_PER_SLOT*NR_NB_SC_PER_RB*8*NR_MAX_NB_LAYERS // 8 is the maximum modulation order (it was 950984 before !!)
#define NR_MAX_PDSCH_TBS 3824
#define MAX_NUM_NR_DLSCH_SEGMENTS 16
#define MAX_NR_DLSCH_PAYLOAD_BYTES (MAX_NUM_NR_DLSCH_SEGMENTS*1056)
#define MAX_NUM_NR_ULSCH_SEGMENTS MAX_NUM_NR_DLSCH_SEGMENTS
#define MAX_NR_ULSCH_PAYLOAD_BYTES (MAX_NUM_NR_ULSCH_SEGMENTS*1056)
#define MAX_NUM_NR_CHANNEL_BITS (14*273*12*6) // 14 symbols, 273 RB
#define MAX_NUM_NR_RE (14*273*12)
typedef enum {
NR_MU_0=0,
NR_MU_1,
NR_MU_2,
NR_MU_3,
NR_MU_4,
} nr_numerology_index_e;
typedef enum {
kHz15=0,
kHz30,
kHz60,
kHz120,
kHz240
} nr_scs_e;
typedef enum{
nr_ssb_type_A = 0,
nr_ssb_type_B,
nr_ssb_type_C,
nr_ssb_type_D,
nr_ssb_type_E
} nr_ssb_type_e;
typedef enum {
nr_FR1 = 0,
nr_FR2
} nr_frequency_range_e;
typedef enum {
MOD_BPSK=0,
MOD_QPSK,
MOD_QAM16,
MOD_QAM64,
MOD_QAM256
}nr_mod_t;
typedef struct {
/// Size of first RBG
uint8_t start_size;
/// Nominal size
uint8_t P;
/// Size of last RBG
uint8_t end_size;
/// Number of RBG
uint8_t N_RBG;
}nr_rbg_parms_t;
typedef struct {
/// Size of first PRG
uint8_t start_size;
/// Nominal size
uint8_t P_prime;
/// Size of last PRG
uint8_t end_size;
/// Number of PRG
uint8_t N_PRG;
} nr_prg_parms_t;
typedef struct NR_BWP_PARMS {
/// BWP ID
uint8_t bwp_id;
/// Subcarrier spacing
nr_scs_e scs;
/// Freq domain location -- 1st CRB index
uint8_t location;
/// Bandwidth in PRB
uint16_t N_RB;
/// Cyclic prefix
uint8_t cyclic_prefix;
/// RBG params
nr_rbg_parms_t rbg_parms;
/// PRG params
nr_prg_parms_t prg_parms;
} NR_BWP_PARMS;
typedef struct {
uint8_t reg_idx;
uint16_t start_sc_idx;
uint8_t symb_idx;
} nr_reg_t;
typedef struct {
uint8_t cce_idx;
nr_reg_t reg_list[NR_NB_REG_PER_CCE];
} nr_cce_t;
/// PRACH-ConfigInfo from 38.331 RRC spec
typedef struct {
/// Parameter: prach-ConfigurationIndex, see TS 38.211 (6.3.3.2).
uint8_t prach_ConfigIndex;
/// Parameter: High-speed-flag, see TS 38.211 (6.3.3.1). 1 corresponds to Restricted set and 0 to Unrestricted set.
uint8_t highSpeedFlag;
/// Restricted Set Config (type A=0 , type B=1) TS 38.211 (6.3.3.1)
uint8_t restrictedSetConfig;
/// 38.211 (NCS 38.211 6.3.3.1).
uint8_t zeroCorrelationZoneConfig;
/// see TS 38.211 (6.3.3.2).
uint8_t msg1_frequencystart;
} NR_PRACH_CONFIG_INFO;
/// PRACH-ConfigSIB or PRACH-Config
typedef struct {
/// Parameter: prach-rootSequenceIndex, see TS 38.211 (6.3.3.2).
uint16_t rootSequenceIndex;
/// prach_Config_enabled=1 means enabled.}
uint8_t prach_Config_enabled;
/// PRACH Configuration Information
NR_PRACH_CONFIG_INFO prach_ConfigInfo;
} NR_PRACH_CONFIG_COMMON;
typedef struct NR_DL_FRAME_PARMS {
/// frequency range
nr_frequency_range_e freq_range;
/// Placeholder to replace overlapping fields below
nfapi_nr_rf_config_t rf_config;
/// Placeholder to replace SSB overlapping fields below
nfapi_nr_sch_config_t sch_config;
/// Number of resource blocks (RB) in DL
int N_RB_DL;
/// Number of resource blocks (RB) in UL
int N_RB_UL;
/// total Number of Resource Block Groups: this is ceil(N_PRB/P)
uint8_t N_RBG;
/// Total Number of Resource Block Groups SubSets: this is P
uint8_t N_RBGS;
/// EUTRA Band
uint8_t eutra_band;
/// DL carrier frequency
uint32_t dl_CarrierFreq;
/// UL carrier frequency
uint32_t ul_CarrierFreq;
/// TX attenuation
uint32_t att_tx;
/// RX attenuation
uint32_t att_rx;
/// total Number of Resource Block Groups: this is ceil(N_PRB/P)
/// Frame type (0 FDD, 1 TDD)
lte_frame_type_t frame_type;
/// Cell ID
uint16_t Nid_cell;
/// subcarrier spacing (15,30,60,120)
uint32_t subcarrier_spacing;
/// 3/4 sampling
uint8_t threequarter_fs;
/// Size of FFT
uint16_t ofdm_symbol_size;
/// Number of prefix samples in all but first symbol of slot
uint16_t nb_prefix_samples;
/// Number of prefix samples in first symbol of slot
uint16_t nb_prefix_samples0;
/// Carrier offset in FFT buffer for first RE in PRB0
uint16_t first_carrier_offset;
/// Number of OFDM/SC-FDMA symbols in one slot
uint16_t symbols_per_slot;
/// Number of slots per subframe
uint16_t slots_per_subframe;
/// Number of slots per frame
uint16_t slots_per_frame;
/// Number of samples in a subframe
uint32_t samples_per_subframe;
/// Number of samples in a slot
uint32_t samples_per_slot;
/// Number of OFDM/SC-FDMA symbols in one subframe (to be modified to account for potential different in UL/DL)
uint16_t symbols_per_tti;
/// Number of samples in a radio frame
uint32_t samples_per_frame;
/// Number of samples in a subframe without CP
uint32_t samples_per_subframe_wCP;
/// Number of samples in a slot without CP
uint32_t samples_per_slot_wCP;
/// Number of samples in a radio frame without CP
uint32_t samples_per_frame_wCP;
/// Number of samples in a tti (same as subrame in LTE, slot in NR)
uint32_t samples_per_tti;
/// NR numerology index [0..5] as specified in 38.211 Section 4 (mu). 0=15khZ SCS, 1=30khZ, 2=60kHz, etc
uint8_t numerology_index;
/// NR number of ttis per subframe deduced from numerology (cf 38.211): 1, 2, 4, 8(not supported),16(not supported),32(not supported)
uint8_t ttis_per_subframe;
/// NR number of slots per tti . Assumption only 2 Slot per TTI is supported (Slot Config 1 in 38.211)
uint8_t slots_per_tti;
//#endif
/// Number of Physical transmit antennas in node
uint8_t nb_antennas_tx;
/// Number of Receive antennas in node
uint8_t nb_antennas_rx;
/// Number of common transmit antenna ports in eNodeB (1 or 2)
uint8_t nb_antenna_ports_eNB;
/// PRACH_CONFIG
NR_PRACH_CONFIG_COMMON prach_config_common;
/// Cyclic Prefix for DL (0=Normal CP, 1=Extended CP)
lte_prefix_type_t Ncp;
/// shift of pilot position in one RB
uint8_t nushift;
/// SRS configuration from TS 38.331 RRC
SRS_NR srs_nr;
/// Power used by SSB in order to estimate signal strength and path loss
int ss_PBCH_BlockPower;
/// for NR TDD management
TDD_UL_DL_configCommon_t *p_tdd_UL_DL_Configuration;
TDD_UL_DL_configCommon_t *p_tdd_UL_DL_ConfigurationCommon2;
TDD_UL_DL_SlotConfig_t *p_TDD_UL_DL_ConfigDedicated;
/// TDD configuration
uint16_t tdd_uplink_nr[2*NR_MAX_SLOTS_PER_FRAME]; /* this is a bitmap of symbol of each slot given for 2 frames */
//SSB related params
/// Start in Subcarrier index of the SSB block
uint16_t ssb_start_subcarrier;
/// SSB type
nr_ssb_type_e ssb_type;
/// Max number of SSB in frame
uint8_t Lmax;
/// SS block pattern (max 64 ssb, each bit is on/off ssb)
uint64_t L_ssb;
/// PBCH polar encoder params
t_nrPolar_params pbch_polar_params;
} NR_DL_FRAME_PARMS;
#define KHz (1000UL)
#define MHz (1000*KHz)
typedef struct nr_bandentry_s {
int16_t band;
uint64_t ul_min;
uint64_t ul_max;
uint64_t dl_min;
uint64_t dl_max;
uint64_t N_OFFs_DL;
uint64_t step_size;
} nr_bandentry_t;
typedef struct nr_band_info_s {
int nbands;
nr_bandentry_t band_info[100];
} nr_band_info_t;
#endif
Reference in New Issue View Git Blame Copy Permalink