maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
ffae55f62c070cc4dda3b79b14a67685c3add71c
openairinterface5g/openair1/SIMULATION/NR_PHY/pucchsim.c
T

625 lines
20 KiB
C
Raw Blame History

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#include <string.h>
#include <math.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include "common/config/config_userapi.h"
#include "common/utils/LOG/log.h"
#include "common/ran_context.h"
#include "PHY/types.h"
#include "PHY/defs_nr_common.h"
#include "PHY/defs_nr_UE.h"
#include "PHY/defs_gNB.h"
#include "PHY/NR_REFSIG/refsig_defs_ue.h"
#include "PHY/NR_REFSIG/nr_mod_table.h"
#include "PHY/MODULATION/modulation_eNB.h"
#include "PHY/MODULATION/modulation_UE.h"
#include "PHY/NR_ESTIMATION/nr_ul_estimation.h"
#include "PHY/INIT/phy_init.h"
#include "PHY/NR_TRANSPORT/nr_transport_proto.h"
#include "PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h"
#include "PHY/NR_UE_TRANSPORT/pucch_nr.h"
#include "SCHED_NR/sched_nr.h"
#include "openair1/SIMULATION/TOOLS/sim.h"
#include "openair1/SIMULATION/RF/rf.h"
#include "openair1/SIMULATION/NR_PHY/nr_unitary_defs.h"
#include "openair1/SIMULATION/NR_PHY/nr_dummy_functions.c"
PHY_VARS_gNB *gNB;
PHY_VARS_NR_UE *UE;
RAN_CONTEXT_t RC;
openair0_config_t openair0_cfg[MAX_CARDS];
int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
double cpuf;
uint8_t nfapi_mode = 0;
uint16_t NB_UE_INST = 1;
uint8_t const nr_rv_round_map[4] = {0, 2, 1, 3};
uint8_t const nr_rv_round_map_ue[4] = {0, 2, 1, 3};
// needed for some functions
PHY_VARS_NR_UE * PHY_vars_UE_g[1][1]={{NULL}};
void init_downlink_harq_status(NR_DL_UE_HARQ_t *dl_harq) {}
int main(int argc, char **argv)
{
char c;
int i,aa=0;//,l;
double sigma2, sigma2_dB=10,SNR,snr0=-2.0,snr1=2.0;
double cfo=0;
uint8_t snr1set=0;
int **txdataF,**rxdataF;
double **s_re,**s_im,**r_re,**r_im;
//int sync_pos, sync_pos_slot;
//FILE *rx_frame_file;
FILE *output_fd = NULL;
//uint8_t write_output_file=0;
//int result;
//int freq_offset;
//int subframe_offset;
//char fname[40], vname[40];
int trial,n_trials=100,n_errors=0,ack_nack_errors=0;
uint8_t transmission_mode = 1,n_tx=1,n_rx=1;
uint16_t Nid_cell=0;
uint64_t SSB_positions=0x01;
channel_desc_t *UE2gNB;
int format=0;
//uint8_t extended_prefix_flag=0;
FILE *input_fd=NULL;
//uint8_t nacktoack_flag=0;
int16_t amp=0x7FFF;
int nr_tti_tx=0;
uint64_t actual_payload=0,payload_received;
int nr_bit=1; // maximum value possible is 2
uint8_t m0=0;// higher layer paramater initial cyclic shift
uint8_t nrofSymbols=1; //number of OFDM symbols can be 1-2 for format 1
uint8_t startingSymbolIndex=0; // resource allocated see 9.2.1, 38.213 for more info.should be actually present in the resource set provided
uint16_t startingPRB=0,startingPRB_intraSlotHopping=0; //PRB number not sure see 9.2.1, 38.213 for more info. Should be actually present in the resource set provided
uint16_t nrofPRB=2;
uint8_t timeDomainOCC=0;
SCM_t channel_model=AWGN;//Rayleigh1_anticorr;
double DS_TDL = .03;
int N_RB_DL=273,mu=1;
float target_error_rate=0.001;
int frame_length_complex_samples;
//int frame_length_complex_samples_no_prefix;
NR_DL_FRAME_PARMS *frame_parms;
//unsigned char frame_type = 0;
int loglvl=OAILOG_WARNING;
int sr_flag = 0;
cpuf = get_cpu_freq_GHz();
if ( load_configmodule(argc,argv,CONFIG_ENABLECMDLINEONLY) == 0) {
exit_fun("[NR_PUCCHSIM] Error, configuration module init failed\n");
}
randominit(0);
logInit();
while ((c = getopt (argc, argv, "f:hA:f:g:i:I:P:B:b:T:m:n:r:o:s:S:x:y:z:N:F:GR:IL:q:c")) != -1) {
switch (c) {
case 'f':
//write_output_file=1;
output_fd = fopen(optarg,"w");
if (output_fd==NULL) {
printf("Error opening %s\n",optarg);
exit(-1);
}
break;
case 'g':
switch((char)*optarg) {
case 'A':
channel_model=SCM_A;
break;
case 'B':
channel_model=SCM_B;
break;
case 'C':
channel_model=SCM_C;
break;
case 'D':
channel_model=SCM_D;
break;
case 'E':
channel_model=EPA;
break;
case 'F':
channel_model=EVA;
break;
case 'G':
channel_model=ETU;
break;
case 'H':
channel_model = TDL_C;
DS_TDL = .030; // 30 ns
break;
case 'I':
channel_model = TDL_C;
DS_TDL = .3; // 300ns
break;
case 'J':
channel_model=TDL_D;
DS_TDL = .03;
break;
default:
printf("Unsupported channel model!\n");
exit(-1);
}
break;
case 'n':
n_trials = atoi(optarg);
break;
case 'o':
cfo = atof(optarg);
printf("Setting CFO to %f Hz\n",cfo);
break;
case 's':
snr0 = atof(optarg);
printf("Setting SNR0 to %f\n",snr0);
break;
case 'S':
snr1 = atof(optarg);
snr1set=1;
printf("Setting SNR1 to %f\n",snr1);
break;
/*
case 't':
Td= atof(optarg);
break;
case 'p':
extended_prefix_flag=1;
break;
case 'd':
frame_type = 1;
break;
case 'r':
ricean_factor = pow(10,-.1*atof(optarg));
if (ricean_factor>1) {
printf("Ricean factor must be between 0 and 1\n");
exit(-1);
}
break;
*/
case 'x':
transmission_mode=atoi(optarg);
if ((transmission_mode!=1) &&
(transmission_mode!=2) &&
(transmission_mode!=6)) {
printf("Unsupported transmission mode %d\n",transmission_mode);
exit(-1);
}
break;
case 'y':
n_tx=atoi(optarg);
if ((n_tx==0) || (n_tx>2)) {
printf("Unsupported number of tx antennas %d\n",n_tx);
exit(-1);
}
break;
case 'z':
n_rx=atoi(optarg);
if ((n_rx==0) || (n_rx>2)) {
printf("Unsupported number of rx antennas %d\n",n_rx);
exit(-1);
}
break;
case 'N':
Nid_cell = atoi(optarg);
break;
case 'R':
N_RB_DL = atoi(optarg);
break;
case 'F':
input_fd = fopen(optarg,"r");
if (input_fd==NULL) {
printf("Problem with filename %s\n",optarg);
exit(-1);
}
break;
case 'L':
loglvl = atoi(optarg);
break;
case 'i':
nrofSymbols=(uint8_t)atoi(optarg);
break;
case 'I':
startingSymbolIndex=(uint8_t)atoi(optarg);
break;
case 'r':
startingPRB=atoi(optarg);
break;
case 'q':
nrofPRB=atoi(optarg);
break;
case 'P':
format=atoi(optarg);
break;
case 'm':
m0=atoi(optarg);
break;
case 'b':
nr_bit=atoi(optarg);
break;
case 'c':
sr_flag=1;
break;
case 'B':
actual_payload=atoi(optarg);
break;
case 'T':
//nacktoack_flag=(uint8_t)atoi(optarg);
target_error_rate=0.001;
break;
default:
case 'h':
printf("%s -h(elp) -p(extended_prefix) -N cell_id -f output_filename -F input_filename -g channel_model -n n_frames -t Delayspread -s snr0 -S snr1 -x transmission_mode -y TXant -z RXant -i Intefrence0 -j Interference1 -A interpolation_file -C(alibration offset dB) -N CellId\n", argv[0]);
printf("-h This message\n");
printf("-p Use extended prefix mode\n");
printf("-d Use TDD\n");
printf("-n Number of frames to simulate\n");
printf("-s Starting SNR, runs from SNR0 to SNR0 + 5 dB. If n_frames is 1 then just SNR is simulated\n");
printf("-S Ending SNR, runs from SNR0 to SNR1\n");
printf("-t Delay spread for multipath channel\n");
printf("-g [A,B,C,D,E,F,G] Use 3GPP SCM (A,B,C,D) or 36-101 (E-EPA,F-EVA,G-ETU) models (ignores delay spread and Ricean factor)\n");
printf("-x Transmission mode (1,2,6 for the moment)\n");
printf("-y Number of TX antennas used in eNB\n");
printf("-z Number of RX antennas used in UE\n");
printf("-i Relative strength of first intefering eNB (in dB) - cell_id mod 3 = 1\n");
printf("-j Relative strength of second intefering eNB (in dB) - cell_id mod 3 = 2\n");
printf("-o Carrier frequency offset in Hz\n");
printf("-N Nid_cell\n");
printf("-R N_RB_DL\n");
printf("-O oversampling factor (1,2,4,8,16)\n");
printf("-A Interpolation_filname Run with Abstraction to generate Scatter plot using interpolation polynomial in file\n");
//printf("-C Generate Calibration information for Abstraction (effective SNR adjustment to remove Pe bias w.r.t. AWGN)\n");
printf("-f Output filename (.txt format) for Pe/SNR results\n");
printf("-F Input filename (.txt format) for RX conformance testing\n");
printf("-i Enter number of ofdm symbols for pucch\n");
printf("-I Starting symbol index for pucch\n");
printf("-r PUCCH starting PRB\n");
printf("-q PUCCH number of PRB\n");
printf("-P Enter the format of PUCCH\n");
printf("-b number of HARQ bits (1-2)\n");
printf("-B payload to be transmitted on PUCCH\n");
printf("-m initial cyclic shift m0\n");
printf("-T to check nacktoack miss for format 1");
exit (-1);
break;
}
}
set_glog(loglvl);
if (snr1set==0) snr1 = snr0+10;
printf("Initializing gNodeB for mu %d, N_RB_DL %d\n",mu,N_RB_DL);
if((format!=0) && (format!=1) && (format!=2)){
printf("PUCCH format %d not supported\n",format);
exit(0);
}
AssertFatal(((format < 2)&&(nr_bit<3)&&(actual_payload<4)) ||
((format == 2)&&(nr_bit>2)&&(nr_bit<65)),"illegal combination format %d, nr_bit %d\n",
format,nr_bit);
actual_payload &= ((1<<nr_bit)-1);
printf("Transmitted payload is %ld\n",actual_payload);
RC.gNB = (PHY_VARS_gNB**) malloc(sizeof(PHY_VARS_gNB *));
RC.gNB[0] = malloc(sizeof(PHY_VARS_gNB));
gNB = RC.gNB[0];
memset((void*)gNB,0,sizeof(*gNB));
frame_parms = &gNB->frame_parms; //to be initialized I suppose (maybe not necessary for PBCH)
frame_parms->nb_antennas_tx = n_tx;
frame_parms->nb_antennas_rx = n_rx;
frame_parms->N_RB_DL = N_RB_DL;
frame_parms->N_RB_UL = N_RB_DL;
frame_parms->Nid_cell = Nid_cell;
nfapi_nr_config_request_scf_t *cfg = &gNB->gNB_config;
cfg->carrier_config.num_tx_ant.value = n_tx;
cfg->carrier_config.num_rx_ant.value = n_rx;
nr_phy_config_request_sim(gNB,N_RB_DL,N_RB_DL,mu,Nid_cell,SSB_positions);
phy_init_nr_gNB(gNB,0,0);
double fs,bw,scs,eps;
if (mu == 1 && N_RB_DL == 217) {
fs = 122.88e6;
bw = 80e6;
scs = 30000;
}
else if (mu == 1 && N_RB_DL == 245) {
fs = 122.88e6;
bw = 90e6;
scs = 30000;
}
else if (mu == 1 && N_RB_DL == 273) {
fs = 122.88e6;
bw = 100e6;
scs = 30000;
}
else if (mu == 1 && N_RB_DL == 106) {
fs = 61.44e6;
bw = 40e6;
scs = 30000;
}
else AssertFatal(1==0,"Unsupported numerology for mu %d, N_RB %d\n",mu, N_RB_DL);
// cfo with respect to sub-carrier spacing
eps = cfo/scs;
// computation of integer and fractional FO to compare with estimation results
int IFO;
if(eps!=0.0){
printf("Introducing a CFO of %lf relative to SCS of %d kHz\n",eps,(int)(scs/1000));
if (eps>0)
IFO=(int)(eps+0.5);
else
IFO=(int)(eps-0.5);
printf("FFO = %lf; IFO = %d\n",eps-IFO,IFO);
}
UE2gNB = new_channel_desc_scm(n_tx, n_rx, channel_model, fs, bw, DS_TDL,0, 0, 0);
if (UE2gNB==NULL) {
printf("Problem generating channel model. Exiting.\n");
exit(-1);
}
frame_length_complex_samples = frame_parms->samples_per_subframe*NR_NUMBER_OF_SUBFRAMES_PER_FRAME;
//frame_length_complex_samples_no_prefix = frame_parms->samples_per_subframe_wCP;
s_re = malloc(2*sizeof(double*));
s_im = malloc(2*sizeof(double*));
r_re = malloc(2*sizeof(double*));
r_im = malloc(2*sizeof(double*));
txdataF = malloc(2*sizeof(int*));
rxdataF = malloc(2*sizeof(int*));
gNB->common_vars.rxdataF=rxdataF;
memcpy((void*)&gNB->frame_parms,(void*)frame_parms,sizeof(frame_parms));
for (i=0; i<2; i++) {
s_re[i] = malloc(frame_length_complex_samples*sizeof(double));
bzero(s_re[i],frame_length_complex_samples*sizeof(double));
s_im[i] = malloc(frame_length_complex_samples*sizeof(double));
bzero(s_im[i],frame_length_complex_samples*sizeof(double));
r_re[i] = malloc(frame_length_complex_samples*sizeof(double));
bzero(r_re[i],frame_length_complex_samples*sizeof(double));
r_im[i] = malloc(frame_length_complex_samples*sizeof(double));
bzero(r_im[i],frame_length_complex_samples*sizeof(double));
printf("Allocating %d samples for txdataF/rxdataF\n",14*frame_parms->ofdm_symbol_size);
txdataF[i] = memalign(32,14*frame_parms->ofdm_symbol_size*sizeof(int));
bzero(txdataF[i],14*frame_parms->ofdm_symbol_size*sizeof(int));
rxdataF[i] = memalign(32,14*frame_parms->ofdm_symbol_size*sizeof(int));
bzero(rxdataF[i],14*frame_parms->ofdm_symbol_size*sizeof(int));
}
//configure UE
UE = malloc(sizeof(PHY_VARS_NR_UE));
memcpy(&UE->frame_parms,frame_parms,sizeof(NR_DL_FRAME_PARMS));
UE->pucch_config_common_nr->hoppingId = Nid_cell;
//phy_init_nr_top(UE); //called from init_nr_ue_signal
UE->perfect_ce = 0;
if(eps!=0.0)
UE->UE_fo_compensation = 1; // if a frequency offset is set then perform fo estimation and compensation
if (init_nr_ue_signal(UE, 1, 0) != 0)
{
printf("Error at UE NR initialisation\n");
exit(-1);
}
uint8_t mcs=0;
startingPRB_intraSlotHopping=N_RB_DL-1;
pucch_GroupHopping_t PUCCH_GroupHopping=UE->pucch_config_common_nr->pucch_GroupHopping;
uint32_t hopping_id=UE->pucch_config_common_nr->hoppingId;
uint32_t dmrs_scrambling_id = 0, data_scrambling_id=0;
//t_nrPolar_params *currentPtr;
if(format==0){
// for now we are not considering SR just HARQ-ACK
if (nr_bit ==0)
mcs=table1_mcs[0];
else if(nr_bit==1)
mcs=table1_mcs[actual_payload];
else if(nr_bit==2)
mcs=table2_mcs[actual_payload];
else AssertFatal(1==0,"Either nr_bit %d or sr_flag %d must be non-zero\n", nr_bit, sr_flag);
}
else if (format == 2 && nr_bit > 11) gNB->uci_polarParams = nr_polar_params(2, nr_bit, nrofPRB, 1, NULL);
for(SNR=snr0;SNR<=snr1;SNR=SNR+1){
ack_nack_errors=0;
n_errors = 0;
for (trial=0; trial<n_trials; trial++) {
bzero(txdataF[aa],frame_parms->ofdm_symbol_size*sizeof(int));
if(format==0){
nr_generate_pucch0(UE,txdataF,frame_parms,PUCCH_GroupHopping,hopping_id,amp,nr_tti_tx,m0,mcs,nrofSymbols,startingSymbolIndex,startingPRB);
}
else if (format == 1){
nr_generate_pucch1(UE,txdataF,frame_parms,UE->pucch_config_dedicated,actual_payload,amp,nr_tti_tx,m0,nrofSymbols,startingSymbolIndex,startingPRB,startingPRB_intraSlotHopping,0,nr_bit);
}
else {
nr_generate_pucch2(UE,0x1234,dmrs_scrambling_id,data_scrambling_id,txdataF,frame_parms,UE->pucch_config_dedicated,actual_payload,amp,nr_tti_tx,nrofSymbols,startingSymbolIndex,nrofPRB,startingPRB,nr_bit);
}
int txlev = signal_energy(&txdataF[aa][startingSymbolIndex*frame_parms->ofdm_symbol_size],
frame_parms->ofdm_symbol_size);
// printf("txlev %d (%d dB), offset %d\n",txlev,dB_fixed(txlev),startingSymbolIndex*frame_parms->ofdm_symbol_size);
// note : this scaling
int nb_re = (format == 0 || format == 1)? 12 : 12*nrofPRB;
sigma2_dB = 10*log10((double)txlev*UE->frame_parms.ofdm_symbol_size/nb_re)-SNR;
sigma2 = pow(10,sigma2_dB/10);
for(i=startingSymbolIndex*frame_parms->ofdm_symbol_size; i<(startingSymbolIndex+1)*frame_parms->ofdm_symbol_size; i++) {
((int16_t*)rxdataF[aa])[i<<1] = (int16_t)(100.0*((double)(((int16_t *)txdataF[aa])[(i<<1)]) + sqrt(sigma2/2)*gaussdouble(0.0,1.0))/sqrt((double)txlev));
((int16_t*)rxdataF[aa])[1+(i<<1)]=(int16_t)(100.0*((double)(((int16_t *)txdataF[aa])[(i<<1)+1])+ sqrt(sigma2/2)*gaussdouble(0.0,1.0))/sqrt((double)txlev));
}
int rxlev = signal_energy(&rxdataF[aa][startingSymbolIndex*frame_parms->ofdm_symbol_size],
frame_parms->ofdm_symbol_size);
// noise measurement
gNB->ulmask_symb = startingSymbolIndex;
for (int rb=0; rb<nrofPRB; rb++) {
int rb2 = rb+startingPRB;
gNB->rb_mask_ul[rb2>>5] |= (1<<(rb2&31));
}
gNB_I0_measurements(gNB);
if (n_trials==1) printf("rxlev %d (%d dB), sigma2 %f dB, SNR %f, TX %f\n",rxlev,dB_fixed(rxlev),sigma2_dB,SNR,10*log10((double)txlev*UE->frame_parms.ofdm_symbol_size/12));
if(format==0){
nfapi_nr_uci_pucch_pdu_format_0_1_t uci_pdu;
nfapi_nr_pucch_pdu_t pucch_pdu;
pucch_pdu.subcarrier_spacing = 1;
pucch_pdu.group_hop_flag = PUCCH_GroupHopping&1;
pucch_pdu.sequence_hop_flag = (PUCCH_GroupHopping>>1)&1;
pucch_pdu.bit_len_harq = nr_bit;
pucch_pdu.bit_len_csi_part1 = 0;
pucch_pdu.bit_len_csi_part2 = 0;
pucch_pdu.sr_flag = sr_flag;
pucch_pdu.nr_of_symbols = nrofSymbols;
pucch_pdu.hopping_id = hopping_id;
pucch_pdu.initial_cyclic_shift = 0;
pucch_pdu.start_symbol_index = startingSymbolIndex;
pucch_pdu.prb_start = startingPRB;
nr_decode_pucch0(gNB,nr_tti_tx,&uci_pdu,&pucch_pdu);
if(nr_bit==1)
ack_nack_errors+=(actual_payload^uci_pdu.harq->harq_list[0].harq_value);
else
ack_nack_errors+=(((actual_payload&1)^uci_pdu.harq->harq_list[0].harq_value)+((actual_payload>>1)^uci_pdu.harq->harq_list[1].harq_value));
free(uci_pdu.harq->harq_list);
}
else if (format==1) {
nr_decode_pucch1(rxdataF,PUCCH_GroupHopping,hopping_id,&(payload_received),frame_parms,amp,nr_tti_tx,m0,nrofSymbols,startingSymbolIndex,startingPRB,startingPRB_intraSlotHopping,timeDomainOCC,nr_bit);
if(nr_bit==1)
ack_nack_errors+=((actual_payload^payload_received)&1);
else
ack_nack_errors+=((actual_payload^payload_received)&1) + (((actual_payload^payload_received)&2)>>1);
}
else if (format==2) {
nfapi_nr_uci_pucch_pdu_format_2_3_4_t uci_pdu;
nfapi_nr_pucch_pdu_t pucch_pdu;
pucch_pdu.rnti = 0x1234;
pucch_pdu.subcarrier_spacing = 1;
pucch_pdu.group_hop_flag = PUCCH_GroupHopping&1;
pucch_pdu.sequence_hop_flag = (PUCCH_GroupHopping>>1)&1;
pucch_pdu.bit_len_csi_part1 = nr_bit;
pucch_pdu.bit_len_harq = 0;
pucch_pdu.bit_len_csi_part2 = 0;
pucch_pdu.sr_flag = 0;
pucch_pdu.nr_of_symbols = nrofSymbols;
pucch_pdu.hopping_id = hopping_id;
pucch_pdu.initial_cyclic_shift = 0;
pucch_pdu.start_symbol_index = startingSymbolIndex;
pucch_pdu.prb_size = nrofPRB;
pucch_pdu.prb_start = startingPRB;
pucch_pdu.dmrs_scrambling_id = dmrs_scrambling_id;
pucch_pdu.data_scrambling_id = data_scrambling_id;
nr_decode_pucch2(gNB,nr_tti_tx,&uci_pdu,&pucch_pdu);
int csi_part1_bytes=pucch_pdu.bit_len_csi_part1>>3;
if ((pucch_pdu.bit_len_csi_part1&7) > 0) csi_part1_bytes++;
for (int i=0;i<csi_part1_bytes;i++) {
if (uci_pdu.csi_part1.csi_part1_payload[i] != ((uint8_t*)&actual_payload)[i]) {
ack_nack_errors++;
break;
}
}
free(uci_pdu.csi_part1.csi_part1_payload);
}
n_errors=((actual_payload^payload_received)&1)+(((actual_payload^payload_received)&2)>>1)+(((actual_payload^payload_received)&4)>>2)+n_errors;
}
printf("SNR=%f, n_trials=%d, n_bit_errors=%d\n",SNR,n_trials,ack_nack_errors);
if((float)ack_nack_errors/(float)(n_trials)<=target_error_rate){
printf("PUCCH test OK\n");
break;
}
}
for (i=0; i<2; i++) {
free(s_re[i]);
free(s_im[i]);
free(r_re[i]);
free(r_im[i]);
free(txdataF[i]);
free(rxdataF[i]);
}
free(s_re);
free(s_im);
free(r_re);
free(r_im);
free(txdataF);
free(rxdataF);
if (output_fd) fclose(output_fd);
if (input_fd) fclose(input_fd);
return(n_errors);
}
Reference in New Issue View Git Blame Copy Permalink