maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

fixed to support doxygen

Browse Source
This commit is contained in:
Rohit Gupta
2015-12-30 21:45:34 +01:00
parent 7290a7d963
commit 020f08b37d
1 changed files with 60 additions and 22 deletions
Download Patch File Download Diff File Expand all files Collapse all files
targets/ARCH/COMMON/common_lib.h
+60 -22
View File
@@ -46,7 +46,7 @@ typedef int64_t openair0_timestamp;
typedef volatile int64_t openair0_vtimestamp;
/* structrue holds the parameters to configure USRP devices*/
/*!\brief structrue holds the parameters to configure USRP devices*/
typedef struct openair0_device_t openair0_device;
@@ -68,7 +68,8 @@ typedef enum {
/** @addtogroup _PHY_RF_INTERFACE_
* @{
*/
/*! \brief RF Gain clibration */
typedef struct {
//! Frequency for which RX chain was calibrated
double freq;
@@ -76,10 +77,11 @@ typedef struct {
double offset;
} rx_gain_calib_table_t;
/*! \brief RF frontend parameters set by application */
typedef struct {
//! Module ID for this configuration
int Mod_id;
// device log level
//! device log level
int log_level;
//! duplexing mode
duplex_mode_t duplex_mode;
@@ -136,10 +138,11 @@ typedef struct {
} openair0_config_t;
/*! \brief RF mapping */
typedef struct {
/* card id */
//! card id
int card;
/* rf chain id */
//! rf chain id
int chain;
} openair0_rf_map;
@@ -182,20 +185,21 @@ typedef enum {
}func_type_t;
/*!\brief structrue holds the parameters to configure USRP devices */
struct openair0_device_t {
/* Module ID of this device */
//! Module ID of this device
int Mod_id;
/* Type of this device */
//! Type of this device
dev_type_t type;
/* Type of the device's host (BBU/RRH) */
//! Type of the device's host (BBU/RRH)
func_type_t func_type;
/* RF frontend parameters set by application */
//! RF frontend parameters set by application
openair0_config_t openair0_cfg;
/* Can be used by driver to hold internal structure*/
//! Can be used by driver to hold internal structure
void *priv;
/* Functions API, which are called by the application*/
@@ -217,7 +221,7 @@ struct openair0_device_t {
@param msg pointer to the message structure passed between BBU-RRH
@param msg_len length of the message
*/
int (*trx_reply_func)(openair0_device *openair0, void *msg, ssize_t msg_len);
int (*trx_reply_func)(openair0_device *device, void *msg, ssize_t msg_len);
/*! \brief Called to send samples to the RF target
@param device pointer to the device structure specific to the RF hardware target
@@ -235,9 +239,9 @@ struct openair0_device_t {
* was received.
* \param device the hardware to use
* \param[out] ptimestamp the time at which the first sample was received.
* \param[out] An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
* \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
* \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
* \param cc Number of channels. If cc == 1, only buff[0] is filled with samples.
* \param antenna_id Index of antenna for which to receive samples
* \returns the number of sample read
*/
int (*trx_read_func)(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps,int antenna_id);
@@ -254,22 +258,29 @@ struct openair0_device_t {
*/
int (*trx_reset_stats_func)(openair0_device *device);
/*! \brief Terminate operation of the transceiver -- free all associated resources */
/*! \brief Terminate operation of the transceiver -- free all associated resources
* \param device the hardware to use
*/
void (*trx_end_func)(openair0_device *device);
/* Terminate operation */
/*! \brief Stop operation of the transceiver
* \param card RF Card to use
*/
int (*trx_stop_func)(int card);
/* Functions API related to UE*/
/*! \brief Set RX feaquencies
* \param
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
* \param exmimo_dump_config dump EXMIMO configuration
* \returns 0 in success
*/
int (*trx_set_freq_func)(openair0_device* device, openair0_config_t *openair0_cfg,int exmimo_dump_config);
/*! \brief Set gains
* \param
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
* \returns 0 in success
*/
int (*trx_set_gains_func)(openair0_device* device, openair0_config_t *openair0_cfg);
@@ -282,20 +293,47 @@ extern "C"
{
#endif
/*! \brief Initialize Openair RF target. It returns 0 if OK */
/*! \brief Initialize Openair RF target. It returns 0 if OK
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
*/
int openair0_device_init(openair0_device* device, openair0_config_t *openair0_cfg);
//USRP
/*! \brief Get the current timestamp of USRP */
/*! \brief Get the current timestamp of USRP
* \param device the hardware to use
*/
openair0_timestamp get_usrp_time(openair0_device *device);
/*! \brief Set the RX frequency of USRP RF TARGET */
/*! \brief Set the RX frequency of USRP RF TARGET
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
*/
int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg);
//extern
/*! \brief Initialize Openair ETHERNET target. It returns 0 if OK */
//extern functions
/*! \brief Initialize Openair ETHERNET target. It returns 0 if OK
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
*/
int openair0_dev_init_eth(openair0_device *device, openair0_config_t *openair0_cfg);
/*! \brief Initialize Openair BLADERF target. It returns 0 if OK
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
*/
int openair0_dev_init_bladerf(openair0_device *device, openair0_config_t *openair0_cfg);
/*! \brief Initialize Openair USRP target. It returns 0 if OK
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
*/
int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_cfg);
/*! \brief Initialize Openair EXMIMO target. It returns 0 if OK
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
*/
int openair0_dev_init_exmimo(openair0_device *device, openair0_config_t *openair0_cfg);
/*@}*/