replaced gpib_send with socket interface
git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5932 818b1a75-f10b-46b9-bf7c-635c3b92a50f
This commit is contained in:
Florian Kaltenberger
@@ -2,26 +2,28 @@ close all
|
||||
clear all
|
||||
hold off
|
||||
|
||||
gpib_card=0; % first GPIB PCI card in the computer
|
||||
gpib_device=28; % this is configured in the signal generator Utilities->System->GPIB->Address menu
|
||||
%gpib_card=0; % first GPIB PCI card in the computer
|
||||
%gpib_device=28; % this is configured in the signal generator Utilities->System->GPIB->Address menu
|
||||
smbv_ip_addr = "192.168.12.201";
|
||||
command = [getenv("OPENAIR_TARGETS") "/TEST/ROHDE_SCHWARZ/EthernetRawCommand.out"];
|
||||
|
||||
fc = 1907600e3;
|
||||
%fc = 1907600e3;
|
||||
fc = 2.6e9;
|
||||
%fc=800e6;
|
||||
|
||||
fs = 7680e3;
|
||||
fref = fc+fs/4;
|
||||
|
||||
power_dBm = -100;
|
||||
cables_loss_dB = 6; % we need to account for the power loss between the signal generator and the card input (splitter, cables)
|
||||
power_dBm = [-70 -80 -90]+20;
|
||||
cables_loss_dB = 12; % we need to account for the power loss between the signal generator and the card input (splitter, cables)
|
||||
|
||||
dual_tx = 0;
|
||||
tdd = 1;
|
||||
card = 0;
|
||||
limeparms;
|
||||
%rf_mode = (RXEN+TXEN+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNAMax+RFBBNORM+DMAMODE_RX+DMAMODE_TX)*[1 1 1 1];
|
||||
rf_mode1 = (RXEN+0+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNAMax+RFBBNORM+DMAMODE_RX+0);
|
||||
rf_mode2 = (RXEN+0+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA2ON+LNAMax+RFBBNORM+DMAMODE_RX+0);
|
||||
rf_mode = [rf_mode1 rf_mode2 0 0];
|
||||
freq_rx = 1907600000*[1 1 1 1];
|
||||
rf_mode = (RXEN+0+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNAMax+RFBBNORM+DMAMODE_RX+0)*[1 1 1 1];
|
||||
freq_rx = fc*[1 1 1 1];
|
||||
freq_tx = freq_rx;
|
||||
tx_gain = 25*[1 1 1 1];
|
||||
rx_gain = 15*[1 1 1 1];
|
||||
@@ -32,85 +34,96 @@ rf_local = [8254813 8255016 8254813 8254813]; %exmimo2_2
|
||||
rf_rxdc = [37059 35459 36300 36999]; %exmimo2_2
|
||||
rf_vcocal=rf_vcocal_19G*[1 1 1 1];
|
||||
eNBflag = 0;
|
||||
tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_LSB;
|
||||
syncmode = SYNCMODE_FREE;
|
||||
tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_TESTRX;
|
||||
%syncmode = SYNCMODE_FREE;
|
||||
syncmode = [SYNCMODE_MASTER SYNCMODE_SLAVE];
|
||||
rffe_rxg_low = 63*[1 1 1 1];
|
||||
rffe_rxg_final = 63*[1 1 1 1];
|
||||
rffe_band = B19G_TDD*[1 1 1 1];
|
||||
autocal = [1 1 1 1];
|
||||
resampling_factor = [2 2 2 2];
|
||||
|
||||
|
||||
gpib_send(gpib_card,gpib_device,'*RST;*CLS'); % reset and configure the signal generator
|
||||
system(sprintf('%s %s ''*RST;*CLS''',command, smbv_ip_addr)); % reset and configure the signal generator
|
||||
%gpib_send(gpib_card,gpib_device,sprintf("POW %ddBm",power_dBm+cables_loss_dB));
|
||||
gpib_send(gpib_card,gpib_device,'POW -14dBm');
|
||||
%gpib_send(gpib_card,gpib_device,'POW -14dBm');
|
||||
%gpib_send(gpib_card,gpib_device,'FREQ 1.91860GHz');
|
||||
%gpib_send(gpib_card,gpib_device,'FREQ 1.919225GHz');
|
||||
%gpib_send(gpib_card,gpib_device,'FREQ 1.909225GHz');
|
||||
gpib_send(gpib_card,gpib_device,sprintf("FREQ %dHz",fref));
|
||||
system(sprintf('%s %s ''FREQ %ldHz''',command,smbv_ip_addr,fref));
|
||||
|
||||
oarf_config_exmimo(card,freq_rx,freq_tx,tdd_config,syncmode,rx_gain,tx_gain,eNBflag,rf_mode,rf_rxdc,rf_local,rf_vcocal,rffe_rxg_low,rffe_rxg_final,rffe_band);
|
||||
for card=1:oarf_get_num_detected_cards
|
||||
oarf_config_exmimo(card-1,freq_rx,freq_tx,tdd_config,syncmode(card),rx_gain,tx_gain,eNBflag,rf_mode,rf_rxdc,rf_local,rf_vcocal,rffe_rxg_low,rffe_rxg_final,rffe_band,autocal,resampling_factor);
|
||||
end
|
||||
autocal = [0 0 0 0];
|
||||
|
||||
ALL_rxrfmode = [LNAByp LNAMed LNAMax];
|
||||
ALL_gain = 0:10:30;
|
||||
ALL_gain = 0:5:30;
|
||||
|
||||
num_chains = 4*oarf_get_num_detected_cards;
|
||||
|
||||
SpN0 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
SpN1 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
N0 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
N1 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
S0 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
S1 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
G0 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
G1 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
NF0 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
NF1 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
SNR0 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
SNR1 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
SpN0 = zeros(length(ALL_rxrfmode),length(ALL_gain),num_chains);
|
||||
%SpN1 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
N0 = zeros(length(ALL_rxrfmode),length(ALL_gain),num_chains);
|
||||
%N1 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
S0 = zeros(length(ALL_rxrfmode),length(ALL_gain),num_chains);
|
||||
S0_lin = zeros(length(ALL_rxrfmode),length(ALL_gain),num_chains);
|
||||
%S1 = zeros(length(ALL_rxrfmode),length(ALL_gain),num_chains);
|
||||
G0 = zeros(length(ALL_rxrfmode),length(ALL_gain),num_chains);
|
||||
%G1 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
NF0 = zeros(length(ALL_rxrfmode),length(ALL_gain),num_chains);
|
||||
%NF1 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
SNR0 = zeros(length(ALL_rxrfmode),length(ALL_gain),num_chains);
|
||||
%SNR1 = zeros(length(ALL_rxrfmode),length(ALL_gain));
|
||||
|
||||
%keyboard
|
||||
|
||||
idx_power = 1;
|
||||
for LNA=ALL_rxrfmode
|
||||
for mode_idx = 1:3
|
||||
LNA=ALL_rxrfmode(mode_idx);
|
||||
|
||||
%gpib_send(gpib_card,gpib_device,['POW ' int2str(power_dBm+cables_loss_dB) 'dBm']);
|
||||
system(sprintf('%s %s ''POW %d dBm''',command,smbv_ip_addr,power_dBm(mode_idx)+cables_loss_dB));
|
||||
|
||||
idx_gain = 1;
|
||||
for rx_gain=ALL_gain
|
||||
|
||||
rf_mode = (RXEN+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNA+RFBBNORM+DMAMODE_RX)*[1 1 0 0];
|
||||
rf_mode = (RXEN+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNA+RFBBNORM+DMAMODE_RX)*[1 1 1 1];
|
||||
rx_gain = rx_gain * [1 1 1 1];
|
||||
|
||||
oarf_config_exmimo(card,freq_rx,freq_tx,tdd_config,syncmode,rx_gain,tx_gain,eNBflag,rf_mode,rf_rxdc,rf_local,rf_vcocal,rffe_rxg_low,rffe_rxg_final,rffe_band);
|
||||
for card=1:oarf_get_num_detected_cards
|
||||
oarf_config_exmimo(card-1,freq_rx,freq_tx,tdd_config,syncmode(card),rx_gain,tx_gain,eNBflag,rf_mode,rf_rxdc,rf_local,rf_vcocal,rffe_rxg_low,rffe_rxg_final,rffe_band,autocal,resampling_factor);
|
||||
end
|
||||
sleep(1);
|
||||
|
||||
% signal measurement
|
||||
gpib_send(gpib_card,gpib_device,'OUTP:STAT ON'); % activate output
|
||||
system(sprintf('%s %s ''OUTP:STAT ON''',command,smbv_ip_addr)); % activate output
|
||||
sleep(.5);
|
||||
|
||||
s=oarf_get_frame(card);
|
||||
s=oarf_get_frame(0);
|
||||
sleep(.5);
|
||||
|
||||
SpN0(idx_power,idx_gain) = mean(abs(s(:,1)).^2) - abs(mean(s(:,1))).^2;
|
||||
SpN1(idx_power,idx_gain) = mean(abs(s(:,2)).^2) - abs(mean(s(:,2))).^2;
|
||||
SpN0(idx_power,idx_gain,:) = mean(abs(s).^2,1) - abs(mean(s,1)).^2;
|
||||
%SpN1(idx_power,idx_gain) = mean(abs(s(:,2)).^2) - abs(mean(s(:,2))).^2;
|
||||
|
||||
figure(1);
|
||||
hold off
|
||||
plot(20*log10(abs(fft(s(:,1)))),'r',20*log10(abs(fft(s(:,2)))),'b')
|
||||
plot(20*log10(abs(fft(s(:,end)))),'r'); %,20*log10(abs(fft(s(:,2)))),'b')
|
||||
title("Signal");
|
||||
ylim([0 200]);
|
||||
|
||||
% noise measurement
|
||||
gpib_send(gpib_card,gpib_device,'OUTP:STAT OFF'); % deactivate output
|
||||
system(sprintf('%s %s ''OUTP:STAT OFF''',command,smbv_ip_addr)); % deactivate output
|
||||
sleep(.5);
|
||||
|
||||
s=oarf_get_frame(card); %oarf_get_frame
|
||||
s=oarf_get_frame(0); %oarf_get_frame
|
||||
sleep(.5);
|
||||
|
||||
N0(idx_power,idx_gain) = mean(abs(s(:,1)).^2) - abs(mean(s(:,1))).^2;
|
||||
N1(idx_power,idx_gain) = mean(abs(s(:,2)).^2) - abs(mean(s(:,2))).^2;
|
||||
N0(idx_power,idx_gain,:) = mean(abs(s).^2,1) - abs(mean(s,1)).^2;
|
||||
%N1(idx_power,idx_gain) = mean(abs(s(:,2)).^2) - abs(mean(s(:,2))).^2;
|
||||
|
||||
figure(2);
|
||||
hold off
|
||||
plot(20*log10(abs(fft(s(:,1)))),'r',20*log10(abs(fft(s(:,2)))),'b')
|
||||
plot(20*log10(abs(fft(s(:,end)))),'r'); %,20*log10(abs(fft(s(:,2)))),'b')
|
||||
title("Noise");
|
||||
ylim([0 200]);
|
||||
|
||||
@@ -120,45 +133,54 @@ for LNA=ALL_rxrfmode
|
||||
% error("something is wrong");
|
||||
% end
|
||||
|
||||
S0(idx_power,idx_gain) = 10*log10(SpN0(idx_power,idx_gain)-N0(idx_power,idx_gain));
|
||||
S1(idx_power,idx_gain) = 10*log10(SpN1(idx_power,idx_gain)-N1(idx_power,idx_gain));
|
||||
G0(idx_power,idx_gain) = S0(idx_power,idx_gain) - power_dBm;
|
||||
G1(idx_power,idx_gain) = S1(idx_power,idx_gain) - power_dBm;
|
||||
NF0(idx_power,idx_gain) = 10*log10(N0(idx_power,idx_gain)) - G0(idx_power,idx_gain) + 105; % 108 is the thermal noise
|
||||
NF1(idx_power,idx_gain) = 10*log10(N1(idx_power,idx_gain)) - G1(idx_power,idx_gain) + 105;
|
||||
SNR0(idx_power,idx_gain) = S0(idx_power,idx_gain)-10*log10(N0(idx_power,idx_gain));
|
||||
SNR1(idx_power,idx_gain) = S1(idx_power,idx_gain)-10*log10(N1(idx_power,idx_gain));
|
||||
S0_lin(idx_power,idx_gain,:) = SpN0(idx_power,idx_gain,:)-N0(idx_power,idx_gain,:);
|
||||
S0_lin(idx_power,idx_gain,S0_lin(idx_power,idx_gain,:)<0) = 0;
|
||||
S0(idx_power,idx_gain,:) = 10*log10(S0_lin(idx_power,idx_gain,:));
|
||||
%S1(idx_power,idx_gain) = 10*log10(SpN1(idx_power,idx_gain)-N1(idx_power,idx_gain));
|
||||
G0(idx_power,idx_gain,:) = S0(idx_power,idx_gain,:) - power_dBm(mode_idx);
|
||||
%G1(idx_power,idx_gain) = S1(idx_power,idx_gain) - power_dBm;
|
||||
NF0(idx_power,idx_gain,:) = 10*log10(N0(idx_power,idx_gain,:)) - G0(idx_power,idx_gain,:) + 105; % 108 is the thermal noise
|
||||
%NF1(idx_power,idx_gain) = 10*log10(N1(idx_power,idx_gain)) - G1(idx_power,idx_gain) + 105;
|
||||
SNR0(idx_power,idx_gain,:) = S0(idx_power,idx_gain,:)-10*log10(N0(idx_power,idx_gain,:));
|
||||
%SNR1(idx_power,idx_gain) = S1(idx_power,idx_gain)-10*log10(N1(idx_power,idx_gain));
|
||||
|
||||
printf(' %d: Signal strength (%f,%f), Gain (%f %f), N (%f %f) SNR (%f %f) NF (%f %f)\n',
|
||||
rx_gain(1), S0(idx_power,idx_gain),S1(idx_power,idx_gain),
|
||||
G0(idx_power,idx_gain),G1(idx_power,idx_gain),
|
||||
10*log10(N0(idx_power,idx_gain)),10*log10(N1(idx_power,idx_gain)),
|
||||
SNR0(idx_power,idx_gain),SNR1(idx_power,idx_gain),
|
||||
NF0(idx_power,idx_gain),NF1(idx_power,idx_gain));
|
||||
fflush(stdout);
|
||||
%printf(' %d: Signal strength (%f,%f), Gain (%f %f), N (%f %f) SNR (%f %f) NF (%f %f)\n',
|
||||
% rx_gain(1), S0(idx_power,idx_gain),S1(idx_power,idx_gain),
|
||||
% G0(idx_power,idx_gain),G1(idx_power,idx_gain),
|
||||
% 10*log10(N0(idx_power,idx_gain)),10*log10(N1(idx_power,idx_gain)),
|
||||
% SNR0(idx_power,idx_gain),SNR1(idx_power,idx_gain),
|
||||
% NF0(idx_power,idx_gain),NF1(idx_power,idx_gain));
|
||||
%fflush(stdout);
|
||||
%fprintf(fid,'%d, %d, %d, %f, %f, %f, %f, %f, %f, %f, %f, %f, %f\n',
|
||||
%power_dBm,gain2391,gain9862, S0,S1,G0,G1,10*log10(N0),10*log10(N1),SNR0,SNR1,NF0,NF1);
|
||||
|
||||
|
||||
idx_gain = idx_gain + 1;
|
||||
|
||||
figure(3)
|
||||
hold off
|
||||
plot(ALL_gain,G0,'o-','markersize',10)
|
||||
plot(ALL_gain,G0(:,:,1),'o-','markersize',10)
|
||||
hold on
|
||||
plot(ALL_gain,G1,'x-','markersize',10)
|
||||
plot(ALL_gain,G0(:,:,2),'x-','markersize',10)
|
||||
plot(ALL_gain,G0(:,:,3),'s-','markersize',10)
|
||||
plot(ALL_gain,G0(:,:,4),'d-','markersize',10)
|
||||
legend('Byp RX0','Med RX0','Max RX0','Byp RX1','Med RX1','Max RX1');
|
||||
title('Gains')
|
||||
|
||||
figure(4)
|
||||
hold off
|
||||
plot(ALL_gain,NF0,'o-','markersize',10)
|
||||
plot(ALL_gain,NF0(:,:,1),'o-','markersize',10)
|
||||
hold on
|
||||
plot(ALL_gain,NF1,'x-','markersize',10)
|
||||
plot(ALL_gain,NF0(:,:,2),'x-','markersize',10)
|
||||
plot(ALL_gain,NF0(:,:,3),'s-','markersize',10)
|
||||
plot(ALL_gain,NF0(:,:,4),'d-','markersize',10)
|
||||
legend('Byp RX0','Med RX0','Max RX0','Byp RX1','Med RX1','Max RX1');
|
||||
title('Noise Figure')
|
||||
|
||||
idx_gain = idx_gain + 1;
|
||||
|
||||
end
|
||||
|
||||
idx_power = idx_power + 1;
|
||||
|
||||
end
|
||||
|
||||
%gpib_send(gpib_card,gpib_device,'OUTP:STAT OFF'); % deactivate output
|
||||
|
||||
Reference in New Issue
Block a user