ue autotest merge part2

cmake_targets/autotests/patches/CmakeLists.patch

@@ -1,12 +0,0 @@
-diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt
-index 07d92a1..b6a02d1 100644
---- a/cmake_targets/CMakeLists.txt
-+++ b/cmake_targets/CMakeLists.txt
-@@ -235,6 +235,7 @@ add_boolean_option(DEBUG_OMG           False "???")
- add_boolean_option(XFORMS              False "This adds the possibility to see the signal oscilloscope")
- add_boolean_option(PRINT_STATS         False "This adds the possibility to see the status")
- add_boolean_option(T_TRACER            False "Activate the T tracer, a debugging/monitoring framework" )
-+add_boolean_option(UE_AUTOTEST_TRACE   False "Activate UE autotest specific logs")
- 
- add_boolean_option(DEBUG_CONSOLE False "makes debugging easier, disables stdout/stderr buffering")
- 

cmake_targets/autotests/patches/autotest_ue_cell_synch_event.patch

@@ -1,20 +0,0 @@
-diff --git a/openair1/PHY/LTE_TRANSPORT/initial_sync.c b/openair1/PHY/LTE_TRANSPORT/initial_sync.c
-index 663978e..b77cb1b 100644
---- a/openair1/PHY/LTE_TRANSPORT/initial_sync.c
-+++ b/openair1/PHY/LTE_TRANSPORT/initial_sync.c
-@@ -476,6 +476,15 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
-     //#endif
- 
-     if (ue->UE_scan_carrier == 0) {
-+
-+    #if UE_AUTOTEST_TRACE
-+      LOG_I(PHY,"[UE  %d] AUTOTEST Cell Sync : frame = %d, rx_offset %d, freq_offset %d \n",
-+              ue->Mod_id,
-+              ue->proc.proc_rxtx[0].frame_rx,
-+              ue->rx_offset,
-+              ue->common_vars.freq_offset );
-+    #endif
-+
-       if (ue->mac_enabled==1) {
- 	LOG_I(PHY,"[UE%d] Sending synch status to higher layers\n",ue->Mod_id);
- 	//mac_resynch();

cmake_targets/autotests/patches/autotest_ue_dlsch_bitrate_metric.patch

@@ -1,18 +0,0 @@
-diff --git a/openair1/SCHED/phy_procedures_lte_ue.c b/openair1/SCHED/phy_procedures_lte_ue.c
-index 5dc629b..353a049 100644
---- a/openair1/SCHED/phy_procedures_lte_ue.c
-+++ b/openair1/SCHED/phy_procedures_lte_ue.c
-@@ -3551,6 +3551,13 @@ int phy_procedures_UE_RX(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uin
-     LOG_D(PHY,"[UE %d] Calculating bitrate Frame %d: total_TBS = %d, total_TBS_last = %d, bitrate %f kbits\n",
- 	  ue->Mod_id,frame_rx,ue->total_TBS[eNB_id],
- 	  ue->total_TBS_last[eNB_id],(float) ue->bitrate[eNB_id]/1000.0);
-+
-+  #if UE_AUTOTEST_TRACE
-+    if ((frame_rx % 100 == 0)) {
-+      LOG_I(PHY,"[UE  %d] AUTOTEST Metric : UE_DLSCH_BITRATE = %5.2f kbps (frame = %d) \n", ue->Mod_id, (float) ue->bitrate[eNB_id]/1000.0, frame_rx);
-+    }
-+  #endif
-+
-   }
- 
- 

cmake_targets/autotests/patches/autotest_ue_offsets_metric.patch

@@ -1,27 +0,0 @@
-diff --git a/openair1/SCHED/phy_procedures_lte_ue.c b/openair1/SCHED/phy_procedures_lte_ue.c
-index 5dc629b..4d31ad3 100644
---- a/openair1/SCHED/phy_procedures_lte_ue.c
-+++ b/openair1/SCHED/phy_procedures_lte_ue.c
-@@ -3347,6 +3347,22 @@ int phy_procedures_UE_RX(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uin
- 
-   // first slot has been processed (FFTs + Channel Estimation, PCFICH/PHICH/PDCCH)
-  
-+   #if UE_AUTOTEST_TRACE
-+    if ( (frame_rx % 10 == 0) && (subframe_rx == 0)) {
-+      printf("AUTOTEST Metric : UE_FREQ_OFFSET = %d Hz (frame = %d) \n", ue->common_vars.freq_offset, frame_rx);
-+      printf("AUTOTEST Metric : UE_RX_OFFSET = %d (frame = %d) \n", ue->rx_offset, frame_rx);
-+
-+      printf("AUTOTEST Metric : RRC Measurments RSRP[0] %.2f dBm/RE, RSSI %.2f dBm, RSRQ[0] %.2f dB, N0 %d dBm/RE, NF %.1f dB (frame = %d)\n",
-+        10*log10(ue->measurements.rsrp[0])-ue->rx_total_gain_dB,
-+        10*log10(ue->measurements.rssi)-ue->rx_total_gain_dB, 
-+        10*log10(ue->measurements.rsrq[0]),
-+        ue->measurements.n0_power_tot_dBm,
-+        (double)ue->measurements.n0_power_tot_dBm+132.24,
-+        frame_rx);
-+     }
-+  #endif
-+
-+ 
-   // do procedures for C-RNTI
-   if (ue->dlsch[eNB_id][0]->active == 1) {
-     VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PDSCH_PROC, VCD_FUNCTION_IN);

cmake_targets/autotests/patches/build_oai.patch

@@ -1,40 +0,0 @@
-diff --git a/cmake_targets/build_oai b/cmake_targets/build_oai
-index 25e9a1c..0b04bb7 100755
---- a/cmake_targets/build_oai
-+++ b/cmake_targets/build_oai
-@@ -54,6 +54,7 @@ BUILD_DOXYGEN=0
- T_TRACER="False"
- DISABLE_HARDWARE_DEPENDENCY="False"
- CMAKE_BUILD_TYPE=""
-+UE_AUTOTEST_TRACE="False"
- trap handle_ctrl_c INT
- 
- function print_help() {
-@@ -130,6 +131,8 @@ Options
-    Enables the T tracer.
- --disable-hardware-dependency
-    Disable HW dependency during installation
-+--ue-autotest-trace
-+    Enable specific traces for UE autotest framework
- Usage (first build):
-  oaisim (eNB + UE): ./build_oai -I  --oaisim -x --install-system-files
-  Eurecom EXMIMO + COTS UE : ./build_oai -I  --eNB -x --install-system-files
-@@ -285,6 +288,10 @@ function main() {
-             echo_info "Disabling hardware dependency for compiling software"
-             DISABLE_HARDWARE_DEPENDENCY="True"
-             shift 1;;
-+        --ue-autotest-trace)
-+            UE_AUTOTEST_TRACE="True"
-+            echo_info "Enabling autotest specific trace for UE"
-+            shift 1;;
-         -h | --help)
-             print_help
-             exit 1;;
-@@ -457,6 +464,7 @@ function main() {
-     echo "set (DEADLINE_SCHEDULER \"${DEADLINE_SCHEDULER_FLAG_USER}\" )"    >>$cmake_file
-     echo "set (CPU_AFFINITY \"${CPU_AFFINITY_FLAG_USER}\" )"      >>$cmake_file
-     echo "set ( T_TRACER $T_TRACER )"              >>  $cmake_file
-+    echo "set (UE_AUTOTEST_TRACE $UE_AUTOTEST_TRACE)"        >>  $cmake_file
-     echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
-     cd  $DIR/$lte_build_dir/build
-     cmake ..

openair1/PHY/CODING/3gpplte_turbo_decoder_sse_8bit.c

@@ -972,11 +972,6 @@ unsigned char phy_threegpplte_turbo_decoder8(short *y,
   } else
     n2 = n;
 
-   if(n2<256)
-    {
-        printf("phy_threegpplte_turbo_decoder8 : frame length < 256\n");
-        return 255;
-    }
 
   for (iind=0; iind < 188 && f1f2mat[iind].nb_bits != n; iind++);