Cleanly pass pusch_vars to nr_pusch_channel_estimation()

Pass pointer to data. This necessitates to move delay from
NR_gNB_ULSCH_t (ULSCH data, including transport channels etc) to
NR_gNB_PUSCH (lower-PHY PUSCH data):

1. This allows to pass a single pointer to nr_pusch_channel_estimation()
2. To me, delay estimation seems to be a lower-PHY calculation, so it
   fits better anyway.

Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>

openair1/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c

@@ -452,7 +452,7 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
                                 int nl,
                                 unsigned short p,
                                 unsigned char symbol,
-                                int ul_id,
+                                NR_gNB_PUSCH *pusch_vars,
                                 int beam_nb,
                                 unsigned short bwp_start_subcarrier,
                                 nfapi_nr_pusch_pdu_t *pusch_pdu,
@@ -534,7 +534,7 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
 
   int nest_count = 0;
   uint64_t noise_amp2 = 0;
-  delay_t *delay = &gNB->ulsch[ul_id].delay;
+  delay_t *delay = &pusch_vars->delay;
   memset(delay, 0, sizeof(*delay));
 
   int nb_antennas_rx = fp->nb_antennas_rx;
@@ -579,7 +579,7 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
     rdata->delay = &delay_arr[rdata->aarx];
     rdata->beam_nb = beam_nb;
     rdata->frame_parms = fp;
-    rdata->pusch_vars = &gNB->pusch_vars[ul_id];
+    rdata->pusch_vars = pusch_vars;
     rdata->chest_freq = gNB->chest_freq;
     rdata->rxdataF = gNB->common_vars.rxdataF;
     rdata->scope = gNB->scopeData;

openair1/PHY/NR_ESTIMATION/nr_ul_estimation.h

@@ -17,7 +17,7 @@
 \param Ns slot number (0..19)
 \param p
 \param symbol symbol within slot
-\param ul_id
+\param pusch_vars lower-phy PUSCH info
 \param bwp_start_subcarrier first allocated subcarrier
 \param pusch_pdu
 \param max_ch maximum value of estimated channel
@@ -29,7 +29,7 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
                                 int nl,
                                 unsigned short p,
                                 unsigned char symbol,
-                                int ul_id,
+                                NR_gNB_PUSCH *pusch_vars,
                                 int beam_nb,
                                 unsigned short bwp_start_subcarrier,
                                 nfapi_nr_pusch_pdu_t *pusch_pdu,

openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c

@@ -1159,7 +1159,7 @@ int nr_rx_pusch_tp(PHY_VARS_gNB *gNB, uint8_t ulsch_id, uint32_t frame, uint8_t
                                     nl,
                                     get_dmrs_port(nl, rel15_ul->dmrs_ports),
                                     symbol,
-                                    ulsch_id,
+                                    pusch_vars,
                                     beam_nb,
                                     bwp_start_subcarrier,
                                     rel15_ul,

openair1/PHY/defs_gNB.h

@@ -187,7 +187,6 @@ typedef struct {
   bool active;
   /// Flag to indicate that the UL configuration has been handled. Used to remove a stale ULSCH when frame wraps around
   uint8_t handled;
-  delay_t delay;
 } NR_gNB_ULSCH_t;
 
 typedef struct {
@@ -275,6 +274,8 @@ typedef struct {
   int llr_offset[14];
   /// flag to indicate DTX on reception
   int DTX;
+  /// delay estimation
+  delay_t delay;
 } NR_gNB_PUSCH;
 
 /// Context data structure for RX/TX portion of slot processing

openair1/SCHED_NR/phy_procedures_nr_gNB.c

@@ -542,7 +542,7 @@ static void nr_fill_indication(PHY_VARS_gNB *gNB,
   nfapi_nr_pusch_pdu_t *pusch_pdu = &harq_process->ulsch_pdu;
 
   // Get estimated timing advance for MAC
-  const int sync_pos = gNB->ulsch[ULSCH_id].delay.est_delay;
+  const int sync_pos = pusch->delay.est_delay;
 
   // scale the 16 factor in N_TA calculation in 38.213 section 4.2 according to the used FFT size
   uint16_t bw_scaling = 16 * gNB->frame_parms.ofdm_symbol_size / 2048;

openair1/SIMULATION/NR_PHY/ulsim.c

@@ -1208,6 +1208,7 @@ int main(int argc, char *argv[])
       uint8_t round = 0;
       crc_status = 1;
       errors_decoding = 0;
+      NR_gNB_PUSCH *pusch_vars = &gNB->pusch_vars[UE_id];
 
       while (round < max_rounds && crc_status && !stop) {
 
@@ -1594,7 +1595,6 @@ int main(int argc, char *argv[])
           }
         }
 
-        NR_gNB_PUSCH *pusch_vars = &gNB->pusch_vars[UE_id];
         if (n_trials == 1 && round == 0) {
           __attribute__((unused)) int off = ((nb_rb & 1) == 1) ? 4 : 0;
 
@@ -1742,9 +1742,9 @@ int main(int argc, char *argv[])
       if (!crc_status)
         effRate += ((double)TBS) / (double)round;
 
-      sum_pusch_delay += ulsch_gNB->delay.est_delay;
-      min_pusch_delay = min(ulsch_gNB->delay.est_delay, min_pusch_delay);
-      max_pusch_delay = max(ulsch_gNB->delay.est_delay, max_pusch_delay);
+      sum_pusch_delay += pusch_vars->delay.est_delay;
+      min_pusch_delay = min(pusch_vars->delay.est_delay, min_pusch_delay);
+      max_pusch_delay = max(pusch_vars->delay.est_delay, max_pusch_delay);
       delay_pusch_est_count++;
 
       if (do_SRS == 1) {