add init_exmimo.sh with cmake generated path

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@6760 818b1a75-f10b-46b9-bf7c-635c3b92a50f

cmake_targets/build_oai.bash

@@ -233,7 +233,7 @@ if [ "$TARGET" = "ALL" -o "$TARGET" = "SOFTMODEM" ] ; then
        make -j4 $f > $log 2>&1
        if [ -s $f ] ; then
 	   echo_success "$f compiled"
-           cp $f $OPENAIR_DIR/cmake_targets/tests/bin 
+           cp $f $OPENAIR_DIR/cmake_targets/bin 
        else
 	   echo_error "$f compilation failed"
        fi

cmake_targets/init_exmimo2.sh

@@ -0,0 +1,57 @@
+#!/bin/bash
+
+PCI=`lspci -m | grep Xilinx`
+if [ -z "$PCI" ]; then
+ echo "No card found. Stopping!"
+ return
+fi
+
+## This part corrects the wrong configuration of the endpoint done by the bios in some machines
+echo "$PCI" | while read config_reg; do
+SLOT_NUMBER=`echo $config_reg | awk -F\" '{print $1}'`
+sudo setpci -s $SLOT_NUMBER 60.b=10
+done
+
+load_module() {
+  mod_name=${1##*/}
+  mod_name=${mod_name%.*}
+  if awk "/$mod_name/ {found=1 ;exit} END {if (found!=1) exit 1}" /proc/modules
+    then
+      echo "module $mod_name already loaded: I remove it first"
+      sudo rmmod $mod_name
+  fi
+  echo loading $mod_name
+  sudo insmod $1
+}
+
+load_module $OPENAIR_DIR/cmake_targets/bin/openair_rf.ko
+sleep 1
+
+if [ ! -e /dev/openair0 ]; then 
+ sudo mknod /dev/openair0 c 127 0
+ sudo chmod a+rw /dev/openair0
+fi
+
+DEVICE=`echo $PCI | awk -F\" '{print $(NF-1)}' | awk '{print $2}'`
+DEVICE_SWID=${DEVICE:2:2}
+if [ $DEVICE_SWID == '0a' ]; then
+   echo "Using firware version 10"
+   $OPENAIR_DIR/cmake_targets/bin/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10
+else
+   echo 'No corresponding firmware found'
+   return
+fi
+
+load_module $OPENAIR_DIR/cmake_targets/bin/nasmesh.ko
+
+if [ "$1" = "eNB" ]; then 
+     echo "bring up oai0 interface for enb"
+     sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
+    $OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.9 -r 1
+else
+    if [ "$1" = "UE" ]; then 
+	echo "bring up oai0 interface for UE"
+	sudo ifconfig oai0 10.0.1.9 netmask 255.255.255.0 broadcast 10.0.1.255
+	$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.9 -t 10.0.1.1 -r 1
+    fi
+fi  

cmake_targets/lte_build_oai/CMakeLists.txt

@@ -1,6 +1,6 @@
 cmake_minimum_required(VERSION 2.8)
 set(XFORMS 1 )
-set(RRC_ASN1_VERSION "Rel8")
+set(RRC_ASN1_VERSION "Rel10")
 set(ENABLE_VCD_FIFO False )
 set(RF_BOARD "EXMIMO")
 set(PACKAGE_NAME "lte-softmodem")

cmake_targets/oaisim_build_oai/CMakeLists.txt

@@ -77,7 +77,7 @@ set (  USE_MME "R10" )
 set (  USER_MODE True )
 set (  XER_PRINT False )
 set (  XFORMS False )
-set(XFORMS False )
-set(RRC_ASN1_VERSION "Rel8")
+set(XFORMS 1 )
+set(RRC_ASN1_VERSION "Rel10")
 set(ENABLE_VCD_FIFO False )
 include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)