Merge pull request 'laptop' (#1) from laptop into develop
Reviewed-on: #1
This commit was merged in pull request #1.
This commit is contained in:
@@ -9,20 +9,29 @@ channelmod = {
|
||||
model_name = "rfsimu_channel_enB0"
|
||||
type = "AWGN";
|
||||
ploss_dB = 0;
|
||||
noise_power_dB = -10;
|
||||
forgetfact = 0;
|
||||
offset = 0;
|
||||
ds_tdl = 0;
|
||||
noise_power_dB = -60;
|
||||
# forgetfact = 0;
|
||||
# offset = 0;
|
||||
# ds_tdl = 0;
|
||||
},
|
||||
{
|
||||
model_name = "rfsimu_channel_ue0"
|
||||
type = "AWGN";
|
||||
ploss_dB = 0;
|
||||
noise_power_dB = 0;
|
||||
forgetfact = 0;
|
||||
offset = 0;
|
||||
ds_tdl = 0;
|
||||
}
|
||||
# ploss_dB = 0;
|
||||
# noise_power_dB = -30;
|
||||
# forgetfact = 0;
|
||||
# offset = 0;
|
||||
# ds_tdl = 0;
|
||||
},
|
||||
{
|
||||
model_name = "rfsimu_channel_ue2"
|
||||
type = "AWGN";
|
||||
# ploss_dB = 0;
|
||||
# noise_power_dB = 0;
|
||||
# forgetfact = 0;
|
||||
# offset = 0;
|
||||
# ds_tdl = 0;
|
||||
}
|
||||
);
|
||||
modellist_rfsimu_2 = (
|
||||
{
|
||||
|
||||
@@ -0,0 +1,279 @@
|
||||
Active_gNBs = ("gNB-Eurecom-5GNRBox");
|
||||
# Asn1_verbosity, choice in: none, info, annoying
|
||||
Asn1_verbosity = "none";
|
||||
|
||||
e2_agent = {
|
||||
enabled = "yes";
|
||||
near_ric_ip_addr = "192.168.71.21";
|
||||
sm_dir = "/usr/local/lib/flexric/"
|
||||
e2ap_server_port: 36422
|
||||
};
|
||||
|
||||
gNBs =
|
||||
(
|
||||
{
|
||||
////////// Identification parameters:
|
||||
gNB_ID = 0xe00;
|
||||
gNB_name = "gNB-Eurecom-5GNRBox";
|
||||
|
||||
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
||||
tracking_area_code = 1;
|
||||
plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ({ sst = 1 }) });
|
||||
|
||||
nr_cellid = 12345678L;
|
||||
|
||||
////////// Physical parameters:
|
||||
|
||||
pdsch_AntennaPorts_XP = 2;
|
||||
pdsch_AntennaPorts_N1 = 2;
|
||||
pusch_AntennaPorts = 4;
|
||||
|
||||
do_CSIRS = 1;
|
||||
do_SRS = 1;
|
||||
|
||||
servingCellConfigCommon = (
|
||||
{
|
||||
#spCellConfigCommon
|
||||
|
||||
physCellId = 0;
|
||||
|
||||
# downlinkConfigCommon
|
||||
#frequencyInfoDL
|
||||
# this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
|
||||
absoluteFrequencySSB = 641280;
|
||||
dl_frequencyBand = 78;
|
||||
# this is 3600 MHz
|
||||
dl_absoluteFrequencyPointA = 640008;
|
||||
#scs-SpecificCarrierList
|
||||
dl_offstToCarrier = 0;
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
dl_subcarrierSpacing = 1;
|
||||
dl_carrierBandwidth = 106;
|
||||
#initialDownlinkBWP
|
||||
#genericParameters
|
||||
# this is RBstart=27,L=48 (275*(L-1))+RBstart
|
||||
initialDLBWPlocationAndBandwidth = 28875; # 6366 12925 12956 28875 12952
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
initialDLBWPsubcarrierSpacing = 1;
|
||||
#pdcch-ConfigCommon
|
||||
initialDLBWPcontrolResourceSetZero = 12;
|
||||
initialDLBWPsearchSpaceZero = 0;
|
||||
|
||||
#uplinkConfigCommon
|
||||
#frequencyInfoUL
|
||||
ul_frequencyBand = 78;
|
||||
#scs-SpecificCarrierList
|
||||
ul_offstToCarrier = 0;
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
ul_subcarrierSpacing = 1;
|
||||
ul_carrierBandwidth = 106;
|
||||
pMax = 20;
|
||||
#initialUplinkBWP
|
||||
#genericParameters
|
||||
initialULBWPlocationAndBandwidth = 28875;
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
initialULBWPsubcarrierSpacing = 1;
|
||||
#rach-ConfigCommon
|
||||
#rach-ConfigGeneric
|
||||
prach_ConfigurationIndex = 98;
|
||||
#prach_msg1_FDM
|
||||
#0 = one, 1=two, 2=four, 3=eight
|
||||
prach_msg1_FDM = 0;
|
||||
prach_msg1_FrequencyStart = 0;
|
||||
zeroCorrelationZoneConfig = 13;
|
||||
preambleReceivedTargetPower = -96;
|
||||
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
|
||||
preambleTransMax = 6;
|
||||
#powerRampingStep
|
||||
# 0=dB0,1=dB2,2=dB4,3=dB6
|
||||
powerRampingStep = 1;
|
||||
#ra_ReponseWindow
|
||||
#1,2,4,8,10,20,40,80
|
||||
ra_ResponseWindow = 4;
|
||||
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
|
||||
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
|
||||
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
|
||||
#oneHalf (0..15) 4,8,12,16,...60,64
|
||||
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14;
|
||||
#ra_ContentionResolutionTimer
|
||||
#(0..7) 8,16,24,32,40,48,56,64
|
||||
ra_ContentionResolutionTimer = 7;
|
||||
rsrp_ThresholdSSB = 19;
|
||||
#prach-RootSequenceIndex_PR
|
||||
#1 = 839, 2 = 139
|
||||
prach_RootSequenceIndex_PR = 2;
|
||||
prach_RootSequenceIndex = 1;
|
||||
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
|
||||
#
|
||||
msg1_SubcarrierSpacing = 1,
|
||||
# restrictedSetConfig
|
||||
# 0=unrestricted, 1=restricted type A, 2=restricted type B
|
||||
restrictedSetConfig = 0,
|
||||
|
||||
msg3_DeltaPreamble = 1;
|
||||
p0_NominalWithGrant =-90;
|
||||
|
||||
# pucch-ConfigCommon setup :
|
||||
# pucchGroupHopping
|
||||
# 0 = neither, 1= group hopping, 2=sequence hopping
|
||||
pucchGroupHopping = 0;
|
||||
hoppingId = 40;
|
||||
p0_nominal = -90;
|
||||
# ssb_PositionsInBurs_BitmapPR
|
||||
# 1=short, 2=medium, 3=long
|
||||
ssb_PositionsInBurst_PR = 2;
|
||||
ssb_PositionsInBurst_Bitmap = 1;
|
||||
|
||||
# ssb_periodicityServingCell
|
||||
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
|
||||
ssb_periodicityServingCell = 2;
|
||||
|
||||
# dmrs_TypeA_position
|
||||
# 0 = pos2, 1 = pos3
|
||||
dmrs_TypeA_Position = 0;
|
||||
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
subcarrierSpacing = 1;
|
||||
|
||||
|
||||
#tdd-UL-DL-ConfigurationCommon
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
referenceSubcarrierSpacing = 1;
|
||||
# pattern1
|
||||
# dl_UL_TransmissionPeriodicity
|
||||
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
|
||||
dl_UL_TransmissionPeriodicity = 6;
|
||||
nrofDownlinkSlots = 7;
|
||||
nrofDownlinkSymbols = 6;
|
||||
nrofUplinkSlots = 2;
|
||||
nrofUplinkSymbols = 4;
|
||||
|
||||
ssPBCH_BlockPower = -25;
|
||||
}
|
||||
|
||||
);
|
||||
|
||||
|
||||
# ------- SCTP definitions
|
||||
SCTP :
|
||||
{
|
||||
# Number of streams to use in input/output
|
||||
SCTP_INSTREAMS = 2;
|
||||
SCTP_OUTSTREAMS = 2;
|
||||
};
|
||||
|
||||
|
||||
////////// AMF parameters:
|
||||
amf_ip_address = ({ ipv4 = "192.168.70.132";});
|
||||
|
||||
|
||||
NETWORK_INTERFACES :
|
||||
{
|
||||
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.70.140/24";
|
||||
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.70.140/24";
|
||||
GNB_PORT_FOR_S1U = 2152; # Spec 2152
|
||||
};
|
||||
|
||||
}
|
||||
);
|
||||
|
||||
MACRLCs = (
|
||||
{
|
||||
num_cc = 1;
|
||||
tr_s_preference = "local_L1";
|
||||
tr_n_preference = "local_RRC";
|
||||
pusch_TargetSNRx10 = 150;
|
||||
pucch_TargetSNRx10 = 200;
|
||||
}
|
||||
);
|
||||
|
||||
L1s = (
|
||||
{
|
||||
num_cc = 1;
|
||||
tr_n_preference = "local_mac";
|
||||
pusch_proc_threads = 8;
|
||||
prach_dtx_threshold = 120;
|
||||
pucch0_dtx_threshold = 150;
|
||||
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
|
||||
}
|
||||
);
|
||||
|
||||
RUs = (
|
||||
{
|
||||
local_rf = "yes"
|
||||
nb_tx = 4
|
||||
nb_rx = 4
|
||||
att_tx = 0
|
||||
att_rx = 0;
|
||||
bands = [78];
|
||||
max_pdschReferenceSignalPower = -27;
|
||||
max_rxgain = 114;
|
||||
eNB_instances = [0];
|
||||
#beamforming 1x4 matrix:
|
||||
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
|
||||
clock_src = "internal";
|
||||
}
|
||||
);
|
||||
|
||||
THREAD_STRUCT = (
|
||||
{
|
||||
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
|
||||
parallel_config = "PARALLEL_SINGLE_THREAD";
|
||||
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
|
||||
worker_config = "WORKER_ENABLE";
|
||||
}
|
||||
);
|
||||
|
||||
rfsimulator :
|
||||
{
|
||||
serveraddr = "server";
|
||||
serverport = "4043";
|
||||
options = (); #("saviq"); or/and "chanmod"
|
||||
modelname = "AWGN";
|
||||
IQfile = "/tmp/rfsimulator.iqs";
|
||||
};
|
||||
|
||||
security = {
|
||||
# preferred ciphering algorithms
|
||||
# the first one of the list that an UE supports in chosen
|
||||
# valid values: nea0, nea1, nea2, nea3
|
||||
ciphering_algorithms = ( "nea0" );
|
||||
|
||||
# preferred integrity algorithms
|
||||
# the first one of the list that an UE supports in chosen
|
||||
# valid values: nia0, nia1, nia2, nia3
|
||||
integrity_algorithms = ( "nia2", "nia0" );
|
||||
|
||||
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
|
||||
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
|
||||
drb_ciphering = "yes";
|
||||
drb_integrity = "no";
|
||||
};
|
||||
|
||||
log_config :
|
||||
{
|
||||
global_log_level ="info";
|
||||
global_log_verbosity ="medium";
|
||||
hw_log_level ="info";
|
||||
hw_log_verbosity ="medium";
|
||||
phy_log_level ="info";
|
||||
phy_log_verbosity ="medium";
|
||||
mac_log_level ="info";
|
||||
mac_log_verbosity ="high";
|
||||
rlc_log_level ="info";
|
||||
rlc_log_verbosity ="medium";
|
||||
pdcp_log_level ="info";
|
||||
pdcp_log_verbosity ="medium";
|
||||
rrc_log_level ="info";
|
||||
rrc_log_verbosity ="medium";
|
||||
ngap_log_level ="info";
|
||||
ngap_log_verbosity ="medium";
|
||||
};
|
||||
|
||||
@include "channelmod_rfsimu.conf"
|
||||
@@ -0,0 +1,279 @@
|
||||
Active_gNBs = ( "gNB-OAI");
|
||||
# Asn1_verbosity, choice in: none, info, annoying
|
||||
Asn1_verbosity = "none";
|
||||
|
||||
gNBs =
|
||||
(
|
||||
{
|
||||
////////// Identification parameters:
|
||||
gNB_ID = 0xe00;
|
||||
gNB_name = "gNB-OAI";
|
||||
|
||||
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
||||
tracking_area_code = 1;
|
||||
plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1; }) });
|
||||
|
||||
nr_cellid = 12345678L;
|
||||
|
||||
////////// Physical parameters:
|
||||
|
||||
pdsch_AntennaPorts_XP = 2;
|
||||
pdsch_AntennaPorts_N1 = 1;
|
||||
pusch_AntennaPorts = 2;
|
||||
|
||||
do_CSIRS = 1;
|
||||
do_SRS = 1;
|
||||
|
||||
servingCellConfigCommon = (
|
||||
{
|
||||
#spCellConfigCommon
|
||||
|
||||
physCellId = 0;
|
||||
|
||||
# downlinkConfigCommon
|
||||
#frequencyInfoDL
|
||||
# this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
|
||||
absoluteFrequencySSB = 641280;
|
||||
dl_frequencyBand = 78;
|
||||
# this is 3600 MHz
|
||||
dl_absoluteFrequencyPointA = 640008;
|
||||
#scs-SpecificCarrierList
|
||||
dl_offstToCarrier = 0;
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
dl_subcarrierSpacing = 1;
|
||||
dl_carrierBandwidth = 106;
|
||||
#initialDownlinkBWP
|
||||
#genericParameters
|
||||
# this is RBstart=27,L=48 (275*(L-1))+RBstart
|
||||
initialDLBWPlocationAndBandwidth = 28875; # 6366 12925 12956 28875 12952
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
initialDLBWPsubcarrierSpacing = 1;
|
||||
#pdcch-ConfigCommon
|
||||
initialDLBWPcontrolResourceSetZero = 12;
|
||||
initialDLBWPsearchSpaceZero = 0;
|
||||
|
||||
#uplinkConfigCommon
|
||||
#frequencyInfoUL
|
||||
ul_frequencyBand = 78;
|
||||
#scs-SpecificCarrierList
|
||||
ul_offstToCarrier = 0;
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
ul_subcarrierSpacing = 1;
|
||||
ul_carrierBandwidth = 106;
|
||||
pMax = 20;
|
||||
#initialUplinkBWP
|
||||
#genericParameters
|
||||
initialULBWPlocationAndBandwidth = 28875;
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
initialULBWPsubcarrierSpacing = 1;
|
||||
#rach-ConfigCommon
|
||||
#rach-ConfigGeneric
|
||||
prach_ConfigurationIndex = 98;
|
||||
#prach_msg1_FDM
|
||||
#0 = one, 1=two, 2=four, 3=eight
|
||||
prach_msg1_FDM = 0;
|
||||
prach_msg1_FrequencyStart = 0;
|
||||
zeroCorrelationZoneConfig = 13;
|
||||
preambleReceivedTargetPower = -96;
|
||||
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
|
||||
preambleTransMax = 6;
|
||||
#powerRampingStep
|
||||
# 0=dB0,1=dB2,2=dB4,3=dB6
|
||||
powerRampingStep = 1;
|
||||
#ra_ReponseWindow
|
||||
#1,2,4,8,10,20,40,80
|
||||
ra_ResponseWindow = 4;
|
||||
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
|
||||
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
|
||||
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
|
||||
#oneHalf (0..15) 4,8,12,16,...60,64
|
||||
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14;
|
||||
#ra_ContentionResolutionTimer
|
||||
#(0..7) 8,16,24,32,40,48,56,64
|
||||
ra_ContentionResolutionTimer = 7;
|
||||
rsrp_ThresholdSSB = 19;
|
||||
#prach-RootSequenceIndex_PR
|
||||
#1 = 839, 2 = 139
|
||||
prach_RootSequenceIndex_PR = 2;
|
||||
prach_RootSequenceIndex = 1;
|
||||
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
|
||||
#
|
||||
msg1_SubcarrierSpacing = 1,
|
||||
# restrictedSetConfig
|
||||
# 0=unrestricted, 1=restricted type A, 2=restricted type B
|
||||
restrictedSetConfig = 0,
|
||||
|
||||
msg3_DeltaPreamble = 1;
|
||||
p0_NominalWithGrant =-90;
|
||||
|
||||
# pucch-ConfigCommon setup :
|
||||
# pucchGroupHopping
|
||||
# 0 = neither, 1= group hopping, 2=sequence hopping
|
||||
pucchGroupHopping = 0;
|
||||
hoppingId = 40;
|
||||
p0_nominal = -90;
|
||||
# ssb_PositionsInBurs_BitmapPR
|
||||
# 1=short, 2=medium, 3=long
|
||||
ssb_PositionsInBurst_PR = 2;
|
||||
ssb_PositionsInBurst_Bitmap = 1;
|
||||
|
||||
# ssb_periodicityServingCell
|
||||
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
|
||||
ssb_periodicityServingCell = 2;
|
||||
|
||||
# dmrs_TypeA_position
|
||||
# 0 = pos2, 1 = pos3
|
||||
dmrs_TypeA_Position = 0;
|
||||
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
subcarrierSpacing = 1;
|
||||
|
||||
|
||||
#tdd-UL-DL-ConfigurationCommon
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
referenceSubcarrierSpacing = 1;
|
||||
# pattern1
|
||||
# dl_UL_TransmissionPeriodicity
|
||||
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
|
||||
dl_UL_TransmissionPeriodicity = 6;
|
||||
nrofDownlinkSlots = 7;
|
||||
nrofDownlinkSymbols = 6;
|
||||
nrofUplinkSlots = 2;
|
||||
nrofUplinkSymbols = 4;
|
||||
|
||||
ssPBCH_BlockPower = -25;
|
||||
}
|
||||
|
||||
);
|
||||
|
||||
|
||||
# ------- SCTP definitions
|
||||
SCTP :
|
||||
{
|
||||
# Number of streams to use in input/output
|
||||
SCTP_INSTREAMS = 2;
|
||||
SCTP_OUTSTREAMS = 2;
|
||||
};
|
||||
|
||||
|
||||
////////// AMF parameters:
|
||||
amf_ip_address = ( { ipv4 = "192.168.70.132";
|
||||
ipv6 = "192:168:30::17";
|
||||
active = "yes";
|
||||
preference = "ipv4";
|
||||
}
|
||||
);
|
||||
|
||||
|
||||
NETWORK_INTERFACES :
|
||||
{
|
||||
GNB_INTERFACE_NAME_FOR_NG_AMF = "demo-oai";
|
||||
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.70.129/24";
|
||||
GNB_INTERFACE_NAME_FOR_NGU = "demo-oai";
|
||||
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.70.129/24";
|
||||
GNB_PORT_FOR_S1U = 2152; # Spec 2152
|
||||
};
|
||||
|
||||
}
|
||||
);
|
||||
|
||||
MACRLCs = (
|
||||
{
|
||||
num_cc = 1;
|
||||
tr_s_preference = "local_L1";
|
||||
tr_n_preference = "local_RRC";
|
||||
pusch_TargetSNRx10 = 150;
|
||||
pucch_TargetSNRx10 = 200;
|
||||
ulsch_max_frame_inactivity = 0;
|
||||
ul_max_mcs = 28;
|
||||
}
|
||||
);
|
||||
|
||||
L1s = (
|
||||
{
|
||||
num_cc = 1;
|
||||
tr_n_preference = "local_mac";
|
||||
prach_dtx_threshold = 120;
|
||||
pucch0_dtx_threshold = 100;
|
||||
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
|
||||
}
|
||||
);
|
||||
|
||||
RUs = (
|
||||
{
|
||||
local_rf = "yes"
|
||||
nb_tx = 2
|
||||
nb_rx = 2
|
||||
att_tx = 12;
|
||||
att_rx = 12;
|
||||
bands = [78];
|
||||
max_pdschReferenceSignalPower = -27;
|
||||
max_rxgain = 114;
|
||||
eNB_instances = [0];
|
||||
#beamforming 1x4 matrix:
|
||||
# bf_weights = [0x00007fff, 0x0000, 0x0000, 0x00007fff];
|
||||
clock_src = "internal";
|
||||
}
|
||||
);
|
||||
|
||||
THREAD_STRUCT = (
|
||||
{
|
||||
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
|
||||
parallel_config = "PARALLEL_SINGLE_THREAD";
|
||||
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
|
||||
worker_config = "WORKER_ENABLE";
|
||||
}
|
||||
);
|
||||
|
||||
rfsimulator :
|
||||
{
|
||||
serveraddr = "server";
|
||||
serverport = "4043";
|
||||
options = (); #("saviq"); or/and "chanmod"
|
||||
modelname = "AWGN";
|
||||
IQfile = "/tmp/rfsimulator.iqs";
|
||||
};
|
||||
|
||||
security = {
|
||||
# preferred ciphering algorithms
|
||||
# the first one of the list that an UE supports in chosen
|
||||
# valid values: nea0, nea1, nea2, nea3
|
||||
ciphering_algorithms = ( "nea0" );
|
||||
|
||||
# preferred integrity algorithms
|
||||
# the first one of the list that an UE supports in chosen
|
||||
# valid values: nia0, nia1, nia2, nia3
|
||||
integrity_algorithms = ( "nia2", "nia0" );
|
||||
|
||||
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
|
||||
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
|
||||
drb_ciphering = "yes";
|
||||
drb_integrity = "no";
|
||||
};
|
||||
|
||||
log_config :
|
||||
{
|
||||
global_log_level ="info";
|
||||
hw_log_level ="info";
|
||||
phy_log_level ="info";
|
||||
mac_log_level ="info";
|
||||
rlc_log_level ="info";
|
||||
pdcp_log_level ="info";
|
||||
rrc_log_level ="info";
|
||||
ngap_log_level ="debug";
|
||||
f1ap_log_level ="debug";
|
||||
};
|
||||
|
||||
e2_agent = {
|
||||
near_ric_ip_addr = "127.0.0.1";
|
||||
#sm_dir = "/path/where/the/SMs/are/located/"
|
||||
sm_dir = "/usr/local/lib/flexric/"
|
||||
};
|
||||
|
||||
@include "channelmod_rfsimu.conf"
|
||||
@@ -0,0 +1,273 @@
|
||||
Active_gNBs = ( "gNB-OAI");
|
||||
# Asn1_verbosity, choice in: none, info, annoying
|
||||
Asn1_verbosity = "none";
|
||||
|
||||
e2_agent = {
|
||||
enabled = "yes";
|
||||
near_ric_ip_addr = "192.168.71.21";
|
||||
sm_dir = "/usr/local/lib/flexric/"
|
||||
e2ap_server_port: 36422
|
||||
};
|
||||
|
||||
gNBs =
|
||||
(
|
||||
{
|
||||
////////// Identification parameters:
|
||||
gNB_ID = 0xe00;
|
||||
gNB_name = "gNB-OAI";
|
||||
|
||||
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
||||
tracking_area_code = 1;
|
||||
plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1; }) });
|
||||
|
||||
nr_cellid = 12345678L;
|
||||
|
||||
////////// Physical parameters:
|
||||
pdsch_AntennaPorts_XP = 2;
|
||||
pdsch_AntennaPorts_N1 = 2;
|
||||
pusch_AntennaPorts = 2;
|
||||
|
||||
do_CSIRS = 1;
|
||||
do_SRS = 1;
|
||||
|
||||
servingCellConfigCommon = (
|
||||
{
|
||||
#spCellConfigCommon
|
||||
|
||||
physCellId = 0;
|
||||
|
||||
# downlinkConfigCommon
|
||||
#frequencyInfoDL
|
||||
# this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
|
||||
absoluteFrequencySSB = 641280;
|
||||
dl_frequencyBand = 78;
|
||||
# this is 3600 MHz
|
||||
dl_absoluteFrequencyPointA = 640008;
|
||||
#scs-SpecificCarrierList
|
||||
dl_offstToCarrier = 0;
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
dl_subcarrierSpacing = 1;
|
||||
dl_carrierBandwidth = 106;
|
||||
#initialDownlinkBWP
|
||||
#genericParameters
|
||||
# this is RBstart=27,L=48 (275*(L-1))+RBstart
|
||||
initialDLBWPlocationAndBandwidth = 28875; # 6366 12925 12956 28875 12952
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
initialDLBWPsubcarrierSpacing = 1;
|
||||
#pdcch-ConfigCommon
|
||||
initialDLBWPcontrolResourceSetZero = 12;
|
||||
initialDLBWPsearchSpaceZero = 0;
|
||||
|
||||
#uplinkConfigCommon
|
||||
#frequencyInfoUL
|
||||
ul_frequencyBand = 78;
|
||||
#scs-SpecificCarrierList
|
||||
ul_offstToCarrier = 0;
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
ul_subcarrierSpacing = 1;
|
||||
ul_carrierBandwidth = 106;
|
||||
pMax = 20;
|
||||
#initialUplinkBWP
|
||||
#genericParameters
|
||||
initialULBWPlocationAndBandwidth = 28875;
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
initialULBWPsubcarrierSpacing = 1;
|
||||
#rach-ConfigCommon
|
||||
#rach-ConfigGeneric
|
||||
prach_ConfigurationIndex = 98;
|
||||
#prach_msg1_FDM
|
||||
#0 = one, 1=two, 2=four, 3=eight
|
||||
prach_msg1_FDM = 0;
|
||||
prach_msg1_FrequencyStart = 0;
|
||||
zeroCorrelationZoneConfig = 13;
|
||||
preambleReceivedTargetPower = -96;
|
||||
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
|
||||
preambleTransMax = 6;
|
||||
#powerRampingStep
|
||||
# 0=dB0,1=dB2,2=dB4,3=dB6
|
||||
powerRampingStep = 1;
|
||||
#ra_ReponseWindow
|
||||
#1,2,4,8,10,20,40,80
|
||||
ra_ResponseWindow = 4;
|
||||
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
|
||||
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
|
||||
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
|
||||
#oneHalf (0..15) 4,8,12,16,...60,64
|
||||
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14;
|
||||
#ra_ContentionResolutionTimer
|
||||
#(0..7) 8,16,24,32,40,48,56,64
|
||||
ra_ContentionResolutionTimer = 7;
|
||||
rsrp_ThresholdSSB = 19;
|
||||
#prach-RootSequenceIndex_PR
|
||||
#1 = 839, 2 = 139
|
||||
prach_RootSequenceIndex_PR = 2;
|
||||
prach_RootSequenceIndex = 1;
|
||||
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
|
||||
#
|
||||
msg1_SubcarrierSpacing = 1,
|
||||
# restrictedSetConfig
|
||||
# 0=unrestricted, 1=restricted type A, 2=restricted type B
|
||||
restrictedSetConfig = 0,
|
||||
|
||||
msg3_DeltaPreamble = 1;
|
||||
p0_NominalWithGrant =-90;
|
||||
|
||||
# pucch-ConfigCommon setup :
|
||||
# pucchGroupHopping
|
||||
# 0 = neither, 1= group hopping, 2=sequence hopping
|
||||
pucchGroupHopping = 0;
|
||||
hoppingId = 40;
|
||||
p0_nominal = -90;
|
||||
# ssb_PositionsInBurs_BitmapPR
|
||||
# 1=short, 2=medium, 3=long
|
||||
ssb_PositionsInBurst_PR = 2;
|
||||
ssb_PositionsInBurst_Bitmap = 1;
|
||||
|
||||
# ssb_periodicityServingCell
|
||||
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
|
||||
ssb_periodicityServingCell = 2;
|
||||
|
||||
# dmrs_TypeA_position
|
||||
# 0 = pos2, 1 = pos3
|
||||
dmrs_TypeA_Position = 0;
|
||||
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
subcarrierSpacing = 1;
|
||||
|
||||
|
||||
#tdd-UL-DL-ConfigurationCommon
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
referenceSubcarrierSpacing = 1;
|
||||
# pattern1
|
||||
# dl_UL_TransmissionPeriodicity
|
||||
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
|
||||
dl_UL_TransmissionPeriodicity = 6;
|
||||
nrofDownlinkSlots = 7;
|
||||
nrofDownlinkSymbols = 6;
|
||||
nrofUplinkSlots = 2;
|
||||
nrofUplinkSymbols = 4;
|
||||
|
||||
ssPBCH_BlockPower = -25;
|
||||
}
|
||||
|
||||
);
|
||||
|
||||
|
||||
# ------- SCTP definitions
|
||||
SCTP :
|
||||
{
|
||||
# Number of streams to use in input/output
|
||||
SCTP_INSTREAMS = 2;
|
||||
SCTP_OUTSTREAMS = 2;
|
||||
};
|
||||
|
||||
|
||||
////////// AMF parameters:
|
||||
amf_ip_address = ({ ipv4 = "192.168.71.132";});
|
||||
|
||||
|
||||
NETWORK_INTERFACES :
|
||||
{
|
||||
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.71.140/24";
|
||||
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.71.140/24";
|
||||
GNB_PORT_FOR_S1U = 2152;
|
||||
};
|
||||
|
||||
}
|
||||
);
|
||||
|
||||
MACRLCs = (
|
||||
{
|
||||
num_cc = 1;
|
||||
tr_s_preference = "local_L1";
|
||||
tr_n_preference = "local_RRC";
|
||||
pusch_TargetSNRx10 = 150;
|
||||
pucch_TargetSNRx10 = 200;
|
||||
ulsch_max_frame_inactivity = 0;
|
||||
ul_max_mcs = 28;
|
||||
}
|
||||
);
|
||||
|
||||
L1s = (
|
||||
{
|
||||
num_cc = 1;
|
||||
tr_n_preference = "local_mac";
|
||||
prach_dtx_threshold = 120;
|
||||
pucch0_dtx_threshold = 100;
|
||||
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
|
||||
}
|
||||
);
|
||||
|
||||
RUs = (
|
||||
{
|
||||
local_rf = "yes"
|
||||
nb_tx = 4
|
||||
nb_rx = 2
|
||||
att_tx = 12;
|
||||
att_rx = 12;
|
||||
bands = [78];
|
||||
max_pdschReferenceSignalPower = -27;
|
||||
max_rxgain = 114;
|
||||
eNB_instances = [0];
|
||||
#beamforming 1x4 matrix:
|
||||
# bf_weights = [0x00010000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00010000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00010000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00010000];
|
||||
# bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
|
||||
clock_src = "internal";
|
||||
}
|
||||
);
|
||||
|
||||
THREAD_STRUCT = (
|
||||
{
|
||||
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
|
||||
parallel_config = "PARALLEL_SINGLE_THREAD";
|
||||
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
|
||||
worker_config = "WORKER_ENABLE";
|
||||
}
|
||||
);
|
||||
|
||||
rfsimulator :
|
||||
{
|
||||
serveraddr = "server";
|
||||
serverport = "4043";
|
||||
options = (); #("saviq"); or/and "chanmod"
|
||||
modelname = "AWGN";
|
||||
IQfile = "/tmp/rfsimulator.iqs";
|
||||
};
|
||||
|
||||
security = {
|
||||
# preferred ciphering algorithms
|
||||
# the first one of the list that an UE supports in chosen
|
||||
# valid values: nea0, nea1, nea2, nea3
|
||||
ciphering_algorithms = ( "nea0" );
|
||||
|
||||
# preferred integrity algorithms
|
||||
# the first one of the list that an UE supports in chosen
|
||||
# valid values: nia0, nia1, nia2, nia3
|
||||
integrity_algorithms = ( "nia2", "nia0" );
|
||||
|
||||
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
|
||||
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
|
||||
drb_ciphering = "yes";
|
||||
drb_integrity = "no";
|
||||
};
|
||||
|
||||
log_config :
|
||||
{
|
||||
global_log_level ="info";
|
||||
hw_log_level ="info";
|
||||
phy_log_level ="info";
|
||||
mac_log_level ="info";
|
||||
rlc_log_level ="info";
|
||||
pdcp_log_level ="info";
|
||||
rrc_log_level ="info";
|
||||
ngap_log_level ="debug";
|
||||
f1ap_log_level ="debug";
|
||||
};
|
||||
|
||||
@include "channelmod_rfsimu.conf"
|
||||
@@ -0,0 +1,52 @@
|
||||
log_config = {
|
||||
global_log_level ="info";
|
||||
hw_log_level ="info";
|
||||
phy_log_level ="info";
|
||||
mac_log_level ="info";
|
||||
rlc_log_level ="info";
|
||||
pdcp_log_level ="info";
|
||||
rrc_log_level ="info";
|
||||
};
|
||||
|
||||
uicc0 = {
|
||||
imsi = "001010000000002";
|
||||
key = "fec86ba6eb707ed08905757b1bb44b8f";
|
||||
opc= "C42449363BBAD02B66D16BC975D77CC1";
|
||||
dnn= "oai";
|
||||
nssai_sst=1;
|
||||
nssai_sd=16777215;
|
||||
}
|
||||
|
||||
MACRLCs = (
|
||||
{
|
||||
num_cc = 1;
|
||||
tr_n_preference = "nfapi";
|
||||
local_n_if_name = "eno1";
|
||||
remote_n_address = "127.0.0.1"; //Proxy IP
|
||||
local_n_address = "127.0.0.1";
|
||||
local_n_portc = 50600;
|
||||
remote_n_portc = 50601;
|
||||
local_n_portd = 50610;
|
||||
remote_n_portd = 50611;
|
||||
}
|
||||
);
|
||||
|
||||
RUs = (
|
||||
{
|
||||
local_rf = "yes"
|
||||
nb_tx = 1
|
||||
nb_rx = 1
|
||||
att_tx = 5;
|
||||
att_rx = 5;
|
||||
bands = [78];
|
||||
# max_pdschReferenceSignalPower = -27;
|
||||
# max_rxgain = 114;
|
||||
# eNB_instances = [0];
|
||||
#beamforming 1x4 matrix:
|
||||
# bf_weights = [0x00010000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00010000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00010000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00010000];
|
||||
# bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
|
||||
clock_src = "internal";
|
||||
}
|
||||
);
|
||||
|
||||
@include "channelmod_rfsimu.conf"
|
||||
@@ -0,0 +1,34 @@
|
||||
log_config = {
|
||||
global_log_level ="info";
|
||||
hw_log_level ="info";
|
||||
phy_log_level ="info";
|
||||
mac_log_level ="info";
|
||||
rlc_log_level ="info";
|
||||
pdcp_log_level ="info";
|
||||
rrc_log_level ="info";
|
||||
};
|
||||
|
||||
uicc0 = {
|
||||
imsi = "001010000000001";
|
||||
key = "fec86ba6eb707ed08905757b1bb44b8f";
|
||||
opc= "C42449363BBAD02B66D16BC975D77CC1";
|
||||
dnn= "oai";
|
||||
nssai_sst=1;
|
||||
nssai_sd=16777215;
|
||||
}
|
||||
|
||||
MACRLCs = (
|
||||
{
|
||||
num_cc = 1;
|
||||
tr_n_preference = "nfapi";
|
||||
local_n_if_name = "eno1";
|
||||
remote_n_address = "127.0.0.1"; //Proxy IP
|
||||
local_n_address = "127.0.0.1";
|
||||
local_n_portc = 50600;
|
||||
remote_n_portc = 50601;
|
||||
local_n_portd = 50610;
|
||||
remote_n_portd = 50611;
|
||||
}
|
||||
);
|
||||
|
||||
@include "channelmod_rfsimu.conf"
|
||||
@@ -1,4 +1,4 @@
|
||||
FROM ran-base-temp:latest AS ran-build
|
||||
FROM ran-base:latest AS ran-build
|
||||
ARG BUILD_OPTION
|
||||
|
||||
RUN rm -Rf /oai-ran
|
||||
|
||||
@@ -1,6 +1,5 @@
|
||||
[NEAR-RIC]
|
||||
NEAR_RIC_IP = 192.168.71.21
|
||||
NEAR_RIC_PORT = 36422
|
||||
|
||||
[XAPP]
|
||||
DB_DIR = /tmp/
|
||||
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
+1
-1
Submodule openair2/E2AP/flexric updated: 19e22cb02d...cea0e5d9ed
@@ -41,7 +41,7 @@ iperf_udp_ul_forever() { ( iperf -u -c "$IPERF_HOST_UDP" -B "$OAITUN_IP" -p "$IP
|
||||
|
||||
# ---------------- profiles ----------------
|
||||
do_boring() {
|
||||
iperf_udp_dl_forever 500K
|
||||
iperf_udp_dl_forever 200M
|
||||
wait
|
||||
# iperf -c "$IPERF_HOST" -p "$IPERF_PORT" -B "$OAITUN_IP" -u -b 25M -t "$LONG_T"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user