Correct READMEs of docker-compose files to reflect config mounting

ci-scripts/yaml_files/4g_rfsimulator_fdd_05MHz/README.md

@@ -410,16 +410,33 @@ in HSS config:
             NB_USERS: 10
 ```
 
-in UE config:
+All UE parameter values will be taken from the mounted config file, so modify
+the corresponding UE file to reflect the above changes
 
 ```yaml
-            MCC: '208'
-            MNC: '96'
-            SHORT_IMSI: '0100000001'
-            LTE_KEY: 'fec86ba6eb707ed08905757b1bb44b8f'
-            OPC: 'c42449363bbad02b66d16bc975d77cc1'
-            MSISDN: '001011234561010'
-            HPLMN: 20896
+  oai_ue0:
+        [...]
+        volumes:
+            - ../../conf_files/lteue.usim-ci.conf:/opt/oai-lte-ue/etc/ue_usim.conf
+```
+
+and in the UE file, you should have
+```
+PLMN: {
+    PLMN0: {
+           FULLNAME="OpenAirInterface";
+           SHORTNAME="OAICN";
+           MNC="96";
+           MCC="208";
+    };
+};
+[...]
+    SIM: {
+        MSIN="0100000001";
+        USIM_API_K="fec86ba6eb707ed08905757b1bb44b8f";
+        OPC="c42449363bbad02b66d16bc975d77cc1";
+        MSISDN="001011234561010";
+    };
 ```
 
 As you can see: `LTE_K` and `LTE_KEY` are the same value. And `OP_KEY` and `OPC` can be deduced from each other. Look in HSS logs.
@@ -471,13 +488,19 @@ in SPGW-C/-U configs:
             REALM: openairinterface.org
 ```
 
-in eNB config:
+In eNB, all the parameter values will be taken from the mounted config file.
 
 ```yaml
-            MCC: '208'
-            MNC: '96'
-            MNC_LENGTH: 2
-            TAC: 1
+oai_enb0:
+        [...]
+        volumes:
+            - ../../conf_files/enb.band7.25prb.rfsim.conf:/opt/oai-enb/etc/enb.conf
+```
+
+with the eNB config reading:
+
+```libconfig
+    plmn_list = ( { mcc = 208; mnc = 96; mnc_length = 2; } );
 ```
 
 The values SHALL match, and `TAC` shall match `TAC_0` from MME.

ci-scripts/yaml_files/5g_l2sim_tdd/README.md

@@ -321,19 +321,52 @@ In the `SMF` section, provide your own DNS IP address:
             DEFAULT_DNS_IPV4_ADDRESS=172.21.3.100
 ```
 
-In the `gNB` section, provide your docker-host primary IP address and interface name: in our case `172.21.16.128` and `eno1`.
+gNB section:
+
+All the parameter values will be taken from the mounted config file
 
 ```yaml
-            GNB_NGA_IF_NAME: eno1
-            GNB_NGA_IP_ADDRESS: 172.21.16.128
-            GNB_NGU_IF_NAME: eno1
-            GNB_NGU_IP_ADDRESS: 172.21.16.128
+oai-gnb:
+        [...]
+        volumes:
+            - ../../conf_files/gnb.sa.band78.106prb.l2sim.conf:/opt/oai-gnb/etc/gnb.conf
 ```
 
-Same thing in the `nr-ue` section:
+with the configuration file having something like:
+
+```libconfig
+    NETWORK_INTERFACES :
+    {
+        GNB_INTERFACE_NAME_FOR_NG_AMF            = "eno1";
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "172.21.16.128";
+        GNB_INTERFACE_NAME_FOR_NGU               = "eno1";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "172.21.16.128";
+        GNB_PORT_FOR_NGU                         = 2152; # Spec 2152
+    };
+```
+
+For the UE, all the parameter values will be taken from the mounted config
+file. Example:
 
 ```yaml
-            NR_UE_NFAPI_IF_NAME: eno1
+  oai-nr-ue0:
+        [...]
+        volumes:
+            - ../../conf_files/nrue.band78.106prb.l2sim.conf:/opt/oai-nr-ue/etc/nr-ue.conf
+            - ../../../openair1/SIMULATION/LTE_PHY/BLER_SIMULATIONS/AWGN/AWGN_results:/opt/oai-nr-ue/openair1/SIMULATION/LTE_PHY/BLER_SIMULATIONS/AWGN/AWGN_results
+```
+
+where the UE configuration (mounted to `/opt/oai-nr-ue/etc/nr-ue.conf`) reads
+
+```libconfig
+MACRLCs = (
+        {
+        num_cc = 1;
+        tr_n_preference = "nfapi";
+        local_n_if_name  = "eno1";
+        remote_n_address = "127.0.0.1"; //Proxy IP
+        local_n_address  = "127.0.0.1";
+        ...
 ```
 
 This tutorial is a first draft. This nFAPI feature and the proxy are still under development.

ci-scripts/yaml_files/5g_rfsimulator/README.md

@@ -244,14 +244,11 @@ Create entry for Second UE in docker-compose.yaml file as follows:
         privileged: true
         container_name: rfsim5g-oai-nr-ue2
         environment:
-            FULL_IMSI: '208990100001101'
-            FULL_KEY: 'fec86ba6eb707ed08905757b1bb44b8f'
-            OPC: 'C42449363BBAD02B66D16BC975D77CC1'
-            DNN: oai
-            NSSAI_SST: 1
             USE_ADDITIONAL_OPTIONS: -E --sa --rfsim -r 106 --numerology 1 -C 3619200000 --rfsimulator.serveraddr 192.168.71.140 --log_config.global_log_options level,nocolor,time
         depends_on:
             - oai-gnb
+        volumes:
+            - ../../conf_files/nrue.uicc.conf:/opt/oai-nr-ue/etc/nr-ue.conf
         networks:
             public_net:
                 ipv4_address: 192.168.71.151
@@ -496,13 +493,25 @@ INSERT INTO `users` VALUES ('208990100001101','1','55000000000000',NULL,'PURGED'
 
 As you can see, 2 other values shall match in the NR-UE section of `docker-compose.yaml`:
 
-OAI UE - 1
-* `FULL_IMSI: '208990100001100'`
-* `FULL_KEY: 'fec86ba6eb707ed08905757b1bb44b8f'`
+All the values such as IMSI and KEY are taken from the configuration file mounted into the container.
 
-OAI UE - 2
-* `FULL_IMSI: '208990100001101'`
-* `FULL_KEY: 'fec86ba6eb707ed08905757b1bb44b8f'`
+```yaml
+ oai-nr-ue:
+        [...]
+        volumes:
+            - ../../conf_files/nrue.uicc.conf:/opt/oai-nr-ue/etc/nr-ue.conf
+```
+
+with the config having:
+```libconfig
+uicc0 = {
+  imsi = "208990100001100";
+  key = "fec86ba6eb707ed08905757b1bb44b8f";
+  opc= "C42449363BBAD02B66D16BC975D77CC1";
+  dnn= "oai";
+  nssai_sst=1;
+}
+```
 
 We are also using a dedicated `oai-smf.conf` for the `SMF` container: the `oai` DNN shall match the one in  the NR-UE section of `docker-compose.yaml` (`DNN: oai`).