updated test case list from older make pre-ci build system

cmake_targets/autotests/README.txt

@@ -18,208 +18,74 @@ Obj.#   Case#   Test#	Description
 01      01      30      Build RRH Gateway
 
 
-01      02              Run OAISIM Rel10 (TDD + 5MHz + Transmission mode 1), and check the operation
-01      02      00      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz) and search for errors, segmentation fault or exit
-01      02      01      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      02      02      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) and search for errors, segmentation fault or exit
-01      02      03      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      02      04      Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      02      05      Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to  UE, and check that there is no packet losses
+01      02              Run OAISIM Rel10 (TDD + 5MHz/10MHz/20MHz + TM 1,2,5,6), and check the operation
+01      02      00      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit
+01      02      01      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors
+01      02      02      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit
+01      02      03      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors
+01      02      04      Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) without PHY_ABSTRACTION mode, ping from from eNB to UE,
+                        and for check for no packet losses
+01      02      05      Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION  mode, send ping from from eNB to UE,
+                        and check for no packet losses
 
-01      03              Run OAISIM Rel10 (FDD + 5MHz + Tranmission mode 1), and check the operation
-01      03      00      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz) and search for errors, segmentation fault or exit
-01      03      01      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      03      02      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz) and search for errors, segmentation fault or exit
-01      03      03      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      03      04      Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      03      05      Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to UE, and check that there is no packet losses
-
-01      04              Run OAISIM Rel10 (TDD + 10MHz + Tranmission mode 1), and check the operation
-01      04      00      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (10 MHz) and search for errors, segmentation fault or exit
-01      04      01      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (10 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      04      02      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (10 MHz) and search for errors, segmentation fault or exit
-01      04      03      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (10 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      04      04      Run OAI Rel10 TDD, 1 eNB + 1 UE (10 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      04      05      Run OAI Rel10 TDD, 1 eNB + 1 UE (10 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to  UE, and check that there is no packet losses
-
-01      05              Run OAISIM Rel10 (FDD + 10MHz + Tranmission mode 1), and check the operation
-01      05      00      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (10 MHz) and search for errors, segmentation fault or exit
-01      05      01      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (10 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      05      02      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (10 MHz) and search for errors, segmentation fault or exit
-01      05      03      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (10 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      05      04      Run OAI Rel10 FDD, 1 eNB + 1 UE (10 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      05      05      Run OAI Rel10 FDD, 1 eNB + 1 UE (10 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to UE, and check that there is no packet losses
-
-01      06              Run OAISIM Rel10 (TDD + 20MHz + Tranmission mode 1), and check the operation
-01      06      00      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (20MHz) and search for errors, segmentation fault or exit
-01      06      01      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (20MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      06      02      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (20MHz) and search for errors, segmentation fault or exit
-01      06      03      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (20MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      06      04      Run OAI Rel10 TDD, 1 eNB + 1 UE (20 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      06      05      Run OAI Rel10 TDD, 1 eNB + 1 UE (20 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to  UE, and check that there is no packet losses
-
-01      07              Run OAISIM Rel10 (FDD + 20MHz + Tranmission mode 1), and check the operation
-01      07      00      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (20MHz) and search for errors, segmentation fault or exit
-01      07      01      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (20MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      07      02      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (20MHz) and search for errors, segmentation fault or exit
-01      07      03      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (20MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      07      04      Run OAI Rel10 FDD, 1 eNB + 1 UE (20 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      07      05      Run OAI Rel10 FDD, 1 eNB + 1 UE (20 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to UE, and check that there is no packet losses
-
-01      08              Run OAISIM Rel10 (TDD + 5 MHz + Tranmission mode 1), and check the operation
-01      08      00      Run OAISIM Rel10 TDD, 2 eNB + 1 UE per eNB (5 MHz) and search for errors, segmentation fault or exit
-01      08      01      Run OAISIM Rel10 TDD, 2 eNB + 1 UE per eNB  (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      08      02      Run OAISIM Rel10 TDD, 2 eNB + 3 UEs per eNB  (5 MHz) and search for errors, segmentation fault or exit
-01      08      03      Run OAISIM Rel10 TDD, 2 eNB + 3 UEs per eNB (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      08      04      Run OAI Rel10 TDD, 2 eNB + 1 UE per eNB (5 MHz) without abstraction mode, send ping from from eNB to UE, and check there is no packet losses
-01      08      05      Run OAI Rel10 TDD, 2 eNB + 1 UE per eNB (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to  UE, and check there is no packet losses
-
-01      09              Run OAISIM Rel10 (FDD + 5 MHz + Tranmission mode 1), and check the operation
-01      09      00      Run OAISIM Rel10 FDD, 2 eNB + 1 UE per eNB (5 MHz) and search for errors, segmentation fault or exit
-01      09      01      Run OAISIM Rel10 FDD, 2 eNB + 1 UE per eNB  (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      09      02      Run OAISIM Rel10 FDD, 2 eNB + 3 UEs per eNB  (5 MHz) and search for errors, segmentation fault or exit
-01      09      03      Run OAISIM Rel10 FDD, 2 eNB + 3 UEs per eNB (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      09      04      Run OAI Rel10 FDD, 2 eNB + 1 UE per eNB (5 MHz) without abstraction mode, send ping from from eNB to UE, and check there is no packet losses
-01      09      05      Run OAI Rel10 FDD, 2 eNB + 1 UE per eNB (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to UE, and check there is no packet losses
+01      03              Run OAISIM Rel10 (FDD + 5MHz/10MHz/20MHz + TM 1,2,5,6), and check the operation
+01      03      00      Run OAISIM Rel10 FDD, 1 eNB + 1 UE 1 eNB (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit
+01      03      01      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors
+01      03      02      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit
+01      03      03      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors
+01      03      04      Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) without PHY_ABSTRACTION mode, ping from from eNB to UE,
+                        and for check for no packet losses
+01      03      05      Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION  mode, send ping from from eNB to UE,
+                        and check for no packet losses
 
 
-01      10              Run OAISIM Rel10 (TDD + 5MHz + Transmission mode 2), and check the operation
-01      10      00      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz) and search for errors, segmentation fault or exit
-01      10      01      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      10      02      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) and search for errors, segmentation fault or exit
-01      10      03      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      10      04      Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      10      05      Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to  UE, and check that there is no packet losses
 
-01      11              Run OAISIM Rel10 (FDD + 5MHz + Tranmission mode 2), and check the operation
-01      11      00      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz) and search for errors, segmentation fault or exit
-01      11      01      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      11      02      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz) and search for errors, segmentation fault or exit
-01      11      03      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      11      04      Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      11      05      Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to UE, and check that there is no packet losses
-
-01      12              Run OAISIM Rel10 (TDD + 10MHz + Tranmission mode 2), and check the operation
-01      12      00      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (10 MHz) and search for errors, segmentation fault or exit
-01      12      01      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (10 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      12      02      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (10 MHz) and search for errors, segmentation fault or exit
-01      12      03      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (10 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      12      04      Run OAI Rel10 TDD, 1 eNB + 1 UE (10 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      12      05      Run OAI Rel10 TDD, 1 eNB + 1 UE (10 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to  UE, and check that there is no packet losses
-
-01      13              Run OAISIM Rel10 (FDD + 10MHz + Tranmission mode 2), and check the operation
-01      13      00      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (10 MHz) and search for errors, segmentation fault or exit
-01      13      01      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (10 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      13      02      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (10 MHz) and search for errors, segmentation fault or exit
-01      13      03      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (10 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      13      04      Run OAI Rel10 FDD, 1 eNB + 1 UE (10 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      13      05      Run OAI Rel10 FDD, 1 eNB + 1 UE (10 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to UE, and check that there is no packet losses
-
-01      14              Run OAISIM Rel10 (TDD + 20MHz + Tranmission mode 2), and check the operation
-01      14      00      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (20MHz) and search for errors, segmentation fault or exit
-01      14      01      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (20MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      14      02      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (20MHz) and search for errors, segmentation fault or exit
-01      14      03      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (20MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      14      04      Run OAI Rel10 TDD, 1 eNB + 1 UE (20 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      14      05      Run OAI Rel10 TDD, 1 eNB + 1 UE (20 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to  UE, and check that there is no packet losses
-
-01      15              Run OAISIM Rel10 (FDD + 20MHz + Tranmission mode 2), and check the operation
-01      15      00      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (20MHz) and search for errors, segmentation fault or exit
-01      15      01      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (20MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      15      02      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (20MHz) and search for errors, segmentation fault or exit
-01      15      03      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (20MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      15      04      Run OAI Rel10 FDD, 1 eNB + 1 UE (20 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      15      05      Run OAI Rel10 FDD, 1 eNB + 1 UE (20 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to UE, and check that there is no packet losses
-
-01      16              Run OAISIM Rel10 (TDD + 5 MHz + Tranmission mode 2), and check the operation
-01      16      00      Run OAISIM Rel10 TDD, 2 eNB + 1 UE per eNB (5 MHz) and search for errors, segmentation fault or exit
-01      16      01      Run OAISIM Rel10 TDD, 2 eNB + 1 UE per eNB  (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      16      02      Run OAISIM Rel10 TDD, 2 eNB + 3 UEs per eNB  (5 MHz) and search for errors, segmentation fault or exit
-01      16      03      Run OAISIM Rel10 TDD, 2 eNB + 3 UEs per eNB (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      16      04      Run OAI Rel10 TDD, 2 eNB + 1 UE per eNB (5 MHz) without abstraction mode, send ping from from eNB to UE, and check there is no packet losses
-01      16      05      Run OAI Rel10 TDD, 2 eNB + 1 UE per eNB (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to  UE, and check there is no packet losses
-
-01      17              Run OAISIM Rel10 (FDD + 5 MHz + Tranmission mode 2), and check the operation
-01      17      00      Run OAISIM Rel10 FDD, 2 eNB + 1 UE per eNB (5 MHz) and search for errors, segmentation fault or exit
-01      17      01      Run OAISIM Rel10 FDD, 2 eNB + 1 UE per eNB  (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      17      02      Run OAISIM Rel10 FDD, 2 eNB + 3 UEs per eNB  (5 MHz) and search for errors, segmentation fault or exit
-01      17      03      Run OAISIM Rel10 FDD, 2 eNB + 3 UEs per eNB (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      17      04      Run OAI Rel10 FDD, 2 eNB + 1 UE per eNB (5 MHz) without abstraction mode, send ping from from eNB to UE, and check there is no packet losses
-01      17      05      Run OAI Rel10 FDD, 2 eNB + 1 UE per eNB (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to UE, and check there is no packet losses
-
-01      18              Run OAISIM Rel10 (TDD + 5MHz + Transmission mode 5), and check the operation
-01      18      00      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz) and search for errors, segmentation fault or exit
-01      18      01      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      18      02      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) and search for errors, segmentation fault or exit
-01      18      03      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      18      04      Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      18      05      Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to  UE, and check that there is no packet losses
-
-01      19              Run OAISIM Rel10 (FDD + 5MHz + Tranmission mode 5), and check the operation
-01      19      00      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz) and search for errors, segmentation fault or exit
-01      19      01      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      19      02      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz) and search for errors, segmentation fault or exit
-01      19      03      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      19      04      Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      19      05      Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to UE, and check that there is no packet losses
-
-
-01      26              Run OAISIM Rel10 (TDD + 5MHz + Transmission mode 6), and check the operation
-01      26      00      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz) and search for errors, segmentation fault or exit
-01      26      01      Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      26      02      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) and search for errors, segmentation fault or exit
-01      26      03      Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      26      04      Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      26      05      Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to  UE, and check that there is no packet losses
-
-01      27              Run OAISIM Rel10 (FDD + 5MHz + Tranmission mode 6), and check the operation
-01      27      00      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz) and search for errors, segmentation fault or exit
-01      27      01      Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      27      02      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz) and search for errors, segmentation fault or exit
-01      27      03      Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
-01      27      04      Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
-01      27      05      Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to UE, and check that there is no packet losses
+01      04              MBSFN Tests
+01      04      00      Check if eMBMS procedure is not finished completely, make sure that the SIB13/MCCH have been correclty received by UEs
+01      04      01      Check if eMBMS multicast/broadcast data is received, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs
+01      04      02      Check for eMBMS multicast/broadcast data received in fdd mode, make sure that the SIB13/MCCH/MTCH have been correctly
+                        received by UEs
+01      04      03      Check for eMBMS multicast/broadcast DF relaying working properly in fdd mode, make sure that the SIB13/MCCH/MTCH have been 
+                        correclty received by UEs
 
 
 01      50              Run PHY unitary secuirity tests
-01      50      00      aes128_cmac_encrypt
-01      50      01      aes128_ctr_decrypt
-01      50      02      aes128_ctr_encrypt
-01      50      03      secu_kenb
-01      50      04      secu_knas
-01      50      05      secu_knas_encrypt_eea1
-01      50      06      secu_knas_encrypt_eea2
-01      50      07      secu_knas_encrypt_eia1
-01      50      08      secu_knas_encrypt_eia2
-01      50      09      kdf
+01      50      00      test_aes128_cmac_encrypt
+01      50      01      test_aes128_ctr_decrypt
+01      50      02      test_aes128_ctr_encrypt
+01      50      03      test_secu_kenb
+01      50      04      test_secu_knas
+01      50      05      test_secu_knas_encrypt_eea1
+01      50      06      test_secu_knas_encrypt_eea2
+01      50      07      test_secu_knas_encrypt_eia1
+01      50      08      test_secu_knas_encrypt_eia2
+01      50      09      test_kdf
         
 
 
 01      51              Run PHY simulator tests
-01      51      00      dlsim
-01      51      00      ulsim
-01      51      00      pucchsim
-01      51      00      prachsim
-01      51      00      pdcchsim
-01      51      00      pbchsim
-01      51      00      mbmssim
+01      51      00      dlsim test cases (Test 1: 10 MHz, R2.FDD (MCS 5), EVA5, -1dB), 
+                        (Test 5: 1.4 MHz, R4.FDD (MCS 4), EVA5, 0dB (70%)),
+                        (Test 6: 10 MHz, R3.FDD (MCS 15), EVA5, 6.7dB (70%)),
+                        (Test 6b: 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (70%)),
+                        (Test 7: 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (30%)),
+                        (Test 7b: 5 MHz, R3-1.FDD (MCS 15), ETU70, 1.4 dB (30%)),
+                        (Test 10: 5 MHz, R6.FDD (MCS 25), EVA5, 17.4 dB (70%)),
+                        (Test 10b: 5 MHz, R6-1.FDD (MCS 24,18 PRB), EVA5, 17.5dB (70%)),
+                        (Test 11: 10 MHz, R7.FDD (MCS 25), EVA5, 17.7dB (70%))
+01      51      01      ulsim Test cases. (Test 1, 5 MHz, FDD (MCS 5), AWGN, 6dB), 
+                        (Test 2, 5 MHz, FDD (MCS 16), AWGN , 12dB (70%)),
+                        (Test 3, 10 MHz, R3.FDD (MCS 5), AWGN, 6dB (70%)),
+                        (Test 4, 10 MHz, R3-1.FDD (MCS 16), AWGN, 12dB (70%)),
+                        (Test 5, 20 MHz, FDD (MCS 5), AWGN, 6dB (70%)),
+                        (Test 6, 20 MHz, FDD (MCS 16), AWGN, 12 dB (70%))
+01      51      02      pucchsim (TBD)
+01      51      03      prachsim (TBD)
+01      51      04      pdcchsim (TBD)
+01      51      05      pbchsim (TBD)
+01      51      06      mbmssim (TBD)
 
 
-01      02      01      Run OAI Rel8, and search for execution errors
-01      02      02      Run OAI Rel8 in abstraction mode and check that RRC proc is finished completely for the configured number of eNB and UE
-01      02      03      Run OAI Rel8 in abstraction mode, send ping from from one eNB to each UE, and check that there is no packet losses
-01      02      04      Run OAI Rel8 with full PHY, and check that the RRC proc for eNBsxUEs
-01      02      05      Run OAI Rel8 with full PHY in FDD mode, and check that the RRC proc for eNBsxUEs
-
-01      03              Run OAI Rel10, and check the operation
-01      03      00      Run OAI Rel10, and search for segmentation fault or exit
-01      03      01      Run OAI Rel10, and search for execution errors
-01      03      02      Run OAI Rel10 in abstraction mode, and check the RRC proc for eNBsxUEs	
-01      03      03      Run OAI Rel10 in full phy mode, and check the RRC proc for eNBsxUEs
-01      03      04      Run OAI Rel10 in full phy mode in FDD mode, and check the RRC proc for eNBsxUEs
-01      03      05      Run OAI Rel10 with eMBMS enabled, and check the SIB13 and MCCH
-01      03      06      Run OAI Rel10 with eMBMS enabled, and check the MTCH
-01      03      07      Run OAI Rel10 with eMBMS enabled and FDD mode, and check the MTCH
 
 02                      Functional test case
 

cmake_targets/autotests/run_exec_autotests.bash

@@ -35,6 +35,7 @@ cd $tdir
 #\param $11 -> pre_compile program execution
 #\param $12 -> class of the test case (compilation, execution)
 #\param $13 -> output of compilation program that needs to be found for test case to pass
+#\param $14 -> tags to help identify the test case for readability in output xml file
 test_compile() {
 
     xUnit_start
@@ -52,6 +53,7 @@ test_compile() {
     pre_compile_prog=${11}
     class=${12}
     compile_prog_out=${13}
+    tags=${14}
     build_dir=$tdir/$1/build
     exec_file=$build_dir/$6
     
@@ -71,18 +73,21 @@ test_compile() {
     
     compile_prog_array=()
     read -a compile_prog_array <<<"$compile_prog"
-     
+    
+    tags_array=()
+    read -a tags_array <<<"$tags"
+    
     pre_compile_prog_array=()
     readarray -t pre_compile_prog_array <<< "$pre_compile_prog"
     for (( run_index=1; run_index <= $nruns; run_index++ ))
     do
-
+    tags_array_index=0
     for pre_compile_prog_array_index in "${pre_compile_prog_array[@]}"  
     do
-
+    
     for compile_prog_array_index in "${compile_prog_array[@]}"  
     do
-       echo "Compiling test case $test_case_name.$compile_prog_array_index Log file = $log_file"  
+       echo "Compiling test case $test_case_name.$compile_prog_array_index.${tags_array[$tags_array_index]} Log file = $log_file"  
        echo "<COMPILATION LOG file=$compile_prog_array_index , Run = $run_index>" >> $log_file
        rm -fr $build_dir
        mkdir -p $build_dir
@@ -96,13 +101,14 @@ test_compile() {
        echo "</COMPILATION LOG>" >> $log_file 2>&1
        if [ "$class" == "compilation" ]; then
          if [ -s "$compile_prog_array_index" ] || [ -s "$compile_prog_out" ] ; then
-           echo_success "$test_case_name $compile_prog_array_index compiled"
-           xUnit_success "compilation" "$test_case_name.$compile_prog_array_index" "PASS" "$run_index"
+           echo_success "$test_case_name.$compile_prog_array_index.${tags_array[$tags_array_index]} compiled"
+           xUnit_success "compilation" "$test_case_name.$compile_prog_array_index.${tags_array[$tags_array_index]}" "PASS" "$run_index"
          else
-           echo_error "$test_case_name $exec_prog compilation failed"
-           xUnit_fail "compilation" "$test_case_name.$compile_prog_array_index" "FAIL" "$run_index"
+           echo_error "$test_case_name.$exec_prog.${tags_array[$tags_array_index]} compilation failed"
+           xUnit_fail "compilation" "$test_case_name.$compile_prog_array_index.${tags_array[$tags_array_index]}" "FAIL" "$run_index"
          fi
        fi
+       let "tags_array_index++"
     done # End of for loop compile_prog_array
     done # End of for loop (pre_compile_prog_array_index)
     done #End of for loop (run_index)
@@ -122,6 +128,8 @@ test_compile() {
 #\param $10 -> number of runs
 #\param $11 -> pre_compile program execution
 #\param $12 -> class of the test case (compilation, execution)
+#\param $13 -> output of compilation program that needs to be found for test case to pass
+#\param $14 -> tags to help identify the test case for readability in output xml file
 
 test_compile_and_run() {
     xUnit_start
@@ -132,12 +140,15 @@ test_compile_and_run() {
     compile_args=$3
     pre_exec_file=$4
     pre_exec_args=$5
+    main_exec=$6
     exec_args=$7
     search_expr_array=("${!8}")
     search_expr_negative=$9
     nruns=${10}
     pre_compile_prog=${11}
     class=${12}
+    compile_prog_out=${13}
+    tags=${14}
     build_dir=$tdir/$1/build
     exec_file=$build_dir/$6
     
@@ -160,6 +171,11 @@ test_compile_and_run() {
     compile_prog_array=()
     read -a compile_prog_array <<<"$compile_prog"
   
+    tags_array=()
+    read -a tags_array <<<"$tags"
+    
+    main_exec_args_array=()
+    readarray -t main_exec_args_array <<< "$exec_args"
 
     for search_expr in "${compile_prog_array[@]}"  
     do
@@ -178,14 +194,10 @@ test_compile_and_run() {
        }>> $log_file 2>&1
        echo "</COMPILATION LOG>" >> $log_file 2>&1
        if [ "$class" == "compilation" ]; then
-         echo "compilation 1"
-         #TODO: The number of runs for compilation test cases is always 1
          if [ -s "$search_expr" ] ; then
-           echo "compilation 1 pass"
            echo_success "$test_case_name $search_expr compiled"
            xUnit_success "compilation" "$test_name.$search_expr" "PASS" 1
          else
-           echo "compilation 1 fail"
            echo_error "$test_case_name $exec_prog compilation failed"
            xUnit_fail "compilation" "$test_name.$search_expr" "FAIL" 1
          fi
@@ -194,69 +206,74 @@ test_compile_and_run() {
 
     #process the test case if it is that of execution
     if [ "$class" == "execution" ]; then
-      for (( run_index=1; run_index <= $nruns; run_index++ ))
+      tags_array_index=0
+      for main_exec_args_array_index in "${main_exec_args_array[@]}"  
+      do
+        for (( run_index=1; run_index <= $nruns; run_index++ ))
         do
+          echo "Executing test case $test_case_name.$main_exec.${tags_array[$tags_array_index]}, Run Index = $run_index, Log file = $log_file"
 
-        echo "Executing test case $test_case_name, Run Index = $run_index, Log file = $log_file"
-
-        echo "-----------------------------------------------------------------------------" >> $log_file  2>&1
-        echo "<EXECUTION LOG Run = $run_index >" >> $log_file  2>&1
+          echo "-----------------------------------------------------------------------------" >> $log_file  2>&1
+          echo "<EXECUTION LOG Run = $run_index >" >> $log_file  2>&1
  
-        if [ -n "$pre_exec_file" ]; then
-          { eval "source $pre_exec_file $pre_exec_args"; } >> $log_file  2>&1
-        fi
+          if [ -n "$pre_exec_file" ]; then
+            { eval "source $pre_exec_file $pre_exec_args"; } >> $log_file  2>&1
+          fi
+          echo "Executing $exec_file $main_exec_args_array_index "
+          echo "Executing $exec_file $main_exec_args_array_index " >> $log_file
+          { eval "$exec_file $main_exec_args_array_index" ;} > $temp_exec_log  2>&1
 
-        { eval "$exec_file $exec_args" ;} > $temp_exec_log  2>&1
-
-        cat $temp_exec_log >> $log_file  2>&1
-        echo "</EXECUTION LOG Run = $run_index >" >> $log_file  2>&1
+          cat $temp_exec_log >> $log_file  2>&1
+          echo "</EXECUTION LOG Test Case = $test_case_name.$main_exec.${tags_array[$tags_array_index]},  Run = $run_index >" >> $log_file  2>&1
     
-        result=1
-        for search_expr in "${search_expr_array[@]}"
-        do
+          result=1
+          for search_expr in "${search_expr_array[@]}"
+          do
      
-          search_result=`grep -E "$search_expr" $temp_exec_log`
+            search_result=`grep -E "$search_expr" $temp_exec_log`
 
-       #echo "search_expr  =   $search_expr"
-       #echo "search_result = $search_result"
+            #echo "search_expr  =   $search_expr"
+            #echo "search_result = $search_result"
 
-         if [ -z "$search_result" ]; then
-           let "result = result & 0"
-         else
-           let "result = result & 1"
-         fi
-        done
+            if [ -z "$search_result" ]; then
+              let "result = result & 0"
+            else
+              let "result = result & 1"
+            fi
+          done
 
-       #echo "result = $result"
+          #echo "result = $result"
 
-       test_case_result=""
-       if [ "$result" -eq "0" ]; then
-         test_case_result="FAIL"
-       fi
+          test_case_result=""
+          if [ "$result" -eq "0" ]; then
+            test_case_result="FAIL"
+          fi
 
-       if [ "$result" -eq "1" ]; then
-         test_case_result="PASS"
-       fi
+          if [ "$result" -eq "1" ]; then
+            test_case_result="PASS"
+          fi
 
-       #If we find a negative search result then there is crash of program and test case is failed even if above condition is true
+          #If we find a negative search result then there is crash of program and test case is failed even if above condition is true
 
-       search_result=`grep -iE "$search_expr_negative" $temp_exec_log`
-       if [ -n "$search_result" ]; then
-          test_case_result="FAIL"
-       fi
+          search_result=`grep -iE "$search_expr_negative" $temp_exec_log`
+          if [ -n "$search_result" ]; then
+            test_case_result="FAIL"
+          fi
      
-       if [ "$test_case_result" == "FAIL" ]; then
-         echo_error "execution $test_case_name.$compile_prog  FAIL $run_index"
-         xUnit_fail "execution" "$test_case_name.$compile_prog" "FAIL" "$run_index"
-       fi
+          if [ "$test_case_result" == "FAIL" ]; then
+            echo_error "execution $test_case_name.$compile_prog.${tags_array[$tags_array_index]}  FAIL $run_index"
+            xUnit_fail "execution" "$test_case_name.$compile_prog.${tags_array[$tags_array_index]}" "FAIL" "$run_index"
+          fi
 
-       if [ "$test_case_result" == "PASS" ]; then
-         echo_success "execution $test_case_name.$compile_prog  PASS $run_index"
-	 xUnit_success "execution" "$test_case_name.$compile_prog" "PASS" "$run_index"        
-       fi
+          if [ "$test_case_result" == "PASS" ]; then
+            echo_success "execution $test_case_name.$compile_prog.${tags_array[$tags_array_index]}  PASS $run_index"
+	    xUnit_success "execution" "$test_case_name.$compile_prog.${tags_array[$tags_array_index]}" "PASS" "$run_index"        
+          fi  
 
-      # End of for loop
-     done
+          
+          done
+       let "tags_array_index++"
+     done # End of for loop (nindex)
    fi
 }
 
@@ -299,15 +316,17 @@ Options
 
 main () {
 RUN_GROUP=0
-test_case_list=""
+test_case_group=""
+test_case_group_array=()
+test_case_array=()
 
 until [ -z "$1" ]
   do
     case "$1" in
        -g | --run-group)
             RUN_GROUP=1
-            test_case_list=$2
-            "Will execute test cases only in group $test_case_list"
+            test_case_group=$2
+            echo_info "Will execute test cases only in group $test_case_group"
             shift 2;;
         -h | --help)
             print_help
@@ -319,6 +338,7 @@ until [ -z "$1" ]
    esac
   done
 
+
 xml_conf="$OPENAIR_DIR/cmake_targets/autotests/test_case_list.xml"
 
 test_case_list=`xmlstarlet sel -T -t -m /xml/testCaseList/testCase -s A:N:- "@id" -v "@id" -n $xml_conf`
@@ -327,8 +347,30 @@ echo "test_case_list = $test_case_list"
 
 readarray -t test_case_array <<<"$test_case_list"
 
+read -a test_case_group_array <<< "$test_case_group"
+ 
 for search_expr in "${test_case_array[@]}"
   do
+    flag_run_test_case=0
+    # search if this test case needs to be executed
+    if [ "$RUN_GROUP" -eq "1" ]; then
+       for search_group in "${test_case_group_array[@]}"
+       do  
+          if [[ $search_expr == $search_group ]];then
+             flag_run_test_case=1
+             echo_info "Test case $search_expr match found in group"
+             break
+          fi
+       done
+    else
+       flag_run_test_case=1
+    fi
+       
+    #We skip this test case if it is not in the group list
+    if [ "$flag_run_test_case" -ne "1" ]; then
+      continue
+    fi
+
     name=$search_expr
     class=`xmlstarlet sel -t -v "/xml/testCaseList/testCase[@id='$search_expr']/class" $xml_conf`
     desc=`xmlstarlet sel -t -v "/xml/testCaseList/testCase[@id='$search_expr']/desc" $xml_conf`
@@ -343,6 +385,7 @@ for search_expr in "${test_case_array[@]}"
     search_expr_false=`xmlstarlet sel -t -v "/xml/testCaseList/testCase[@id='$search_expr']/search_expr_false" $xml_conf`
     nruns=`xmlstarlet sel -t -v "/xml/testCaseList/testCase[@id='$search_expr']/nruns" $xml_conf`
     compile_prog_out=`xmlstarlet sel -t -v "/xml/testCaseList/testCase[@id='$search_expr']/compile_prog_out" $xml_conf`
+    tags=`xmlstarlet sel -t -v "/xml/testCaseList/testCase[@id='$search_expr']/tags" $xml_conf`
 
     echo "class = $class"
     echo "name = $name"
@@ -376,9 +419,9 @@ for search_expr in "${test_case_array[@]}"
     #echo "arg1 = ${search_array_true[0]}"
     #echo " arg2 = ${search_array_true[1]}"
     if [ "$class" == "compilation" ]; then
-        test_compile "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out"
-    elif  "$class" == "execution" ]; then
-        test_compile_and_run "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class"
+        test_compile "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags"
+    elif  [ "$class" == "execution" ]; then
+        test_compile_and_run "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags" 
     else
         echo "Unexpected class of test case...Exiting...."
     fi

cmake_targets/autotests/test_case_list.xml

@@ -15,9 +15,7 @@
      <search_expr_false></search_expr_false>
      <nruns>2</nruns>
      </testCase>
-  </testCaseList>
  
-<testCaseList>
      <testCase id="010102" >
      <class>compilation</class>
      <desc>Build oaisim.Rel8 + network device driver(nasmesh_fix)</desc>
@@ -32,9 +30,7 @@
      <search_expr_false></search_expr_false>
      <nruns>1</nruns>
      </testCase>
-  </testCaseList>
 
-<testCaseList>
      <testCase id="010103" >
      <class>compilation</class>
      <desc>Build lte-softmodem EXMIMO.Rel8 + EXMIMO.Rel10 + USRP.Rel10</desc>
@@ -51,9 +47,7 @@
      <search_expr_false></search_expr_false>
      <nruns>1</nruns>
      </testCase>
-  </testCaseList>
- 
-<testCaseList>
+
      <testCase id="010104" >
      <class>compilation</class>
      <desc>Build phy unitary simulators + secuirity unitary tests</desc>
@@ -68,9 +62,7 @@
      <search_expr_false></search_expr_false>
      <nruns>1</nruns>
      </testCase>
-  </testCaseList>
 
-<testCaseList>
      <testCase id="010106" >
      <class>compilation</class>
      <desc>Build oaisim.Rel8 + ITTI</desc>
@@ -85,9 +77,7 @@
      <search_expr_false></search_expr_false>
      <nruns>1</nruns>
      </testCase>
-  </testCaseList>
 
-<testCaseList>
      <testCase id="010107" >
      <class>compilation</class>
      <desc>Build oaisim_nos1.Rel10</desc>
@@ -102,9 +92,7 @@
      <search_expr_false></search_expr_false>
      <nruns>1</nruns>
      </testCase>
-  </testCaseList>
-
-<testCaseList>
+ 
      <testCase id="010108" >
      <class>compilation</class>
      <desc>Build oaisim.Rel10 + ITTI</desc>
@@ -119,9 +107,7 @@
      <search_expr_false></search_expr_false>
      <nruns>1</nruns>
      </testCase>
-  </testCaseList>
-
-<testCaseList>
+ 
      <testCase id="010120" >
      <class>compilation</class>
      <desc>Build Nasmesh</desc>
@@ -137,9 +123,8 @@
      <search_expr_false></search_expr_false>
      <nruns>1</nruns>
      </testCase>
-  </testCaseList>
 
-<testCaseList>
+
      <testCase id="010130" >
      <class>compilation</class>
      <desc>Build RRH Gateway</desc>
@@ -154,11 +139,604 @@
      <search_expr_false></search_expr_false>
      <nruns>1</nruns>
      </testCase>
+
+
+   <testCase id="010200">
+      <class>execution</class>
+      <desc>Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50  -x 2
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100  -x 2
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25  -x 5
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 5
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 5
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 6
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 6
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 6</main_exec_args>
+      <tags>tdd.5MHz.TM1 tdd.10MHz.TM1 tdd.20MHz.TM1 tdd.5MHz.TM2 tdd.10MHz.TM2 tdd.20MHz.TM2 tdd.5MHz.TM5 tdd.10MHz.TM5 tdd.20MHz.TM5 tdd.5MHz.TM6 tdd.10MHz.TM6 tdd.20MHz.TM6</tags>
+      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="010201">
+      <class>execution</class>
+      <desc>Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -a 
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -a 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -a 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50  -x 2 -a 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100  -x 2 -a 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25  -x 5 -a 
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 5 -a 
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 5 -a 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 6 -a 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 6 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 6 -a</main_exec_args>
+      <tags>tdd.5MHz.TM1 tdd.10MHz.TM1 tdd.20MHz.TM1 tdd.5MHz.TM2 tdd.10MHz.TM2 tdd.20MHz.TM2 tdd.5MHz.TM5 tdd.10MHz.TM5 tdd.20MHz.TM5 tdd.5MHz.TM6 tdd.10MHz.TM6 tdd.20MHz.TM6</tags>
+      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="010202">
+      <class>execution</class>
+      <desc>Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50  -x 2
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100  -x 2
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25  -x 5
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 5
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 5
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 6
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 6
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 6 </main_exec_args>
+      <tags>tdd.5MHz.TM1 tdd.10MHz.TM1 tdd.20MHz.TM1 tdd.5MHz.TM2 tdd.10MHz.TM2 tdd.20MHz.TM2 tdd.5MHz.TM5 tdd.10MHz.TM5 tdd.20MHz.TM5 tdd.5MHz.TM6 tdd.10MHz.TM6 tdd.20MHz.TM6</tags>
+      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="010203">
+      <class>execution</class>
+      <desc>Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -a 
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50  -x 2 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100  -x 2 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25  -x 5 -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 5 -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 5 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 6 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 6 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 6 -a</main_exec_args>
+      <tags>tdd.5MHz.TM1 tdd.10MHz.TM1 tdd.20MHz.TM1 tdd.5MHz.TM2 tdd.10MHz.TM2 tdd.20MHz.TM2 tdd.5MHz.TM5 tdd.10MHz.TM5 tdd.20MHz.TM5 tdd.5MHz.TM6 tdd.10MHz.TM6 tdd.20MHz.TM6</tags>
+      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="010204">
+      <class>execution</class>
+      <desc>Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -c26 
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -c26 
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -c26 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -c26 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50  -x 2 -c26 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100  -x 2 -c26 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25  -x 5 -c26 
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 5 -c26 
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 5 -c26 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 6 -c26 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 6 -c26 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 6 -c26 </main_exec_args>
+      <tags>tdd.5MHz.TM1 tdd.10MHz.TM1 tdd.20MHz.TM1 tdd.5MHz.TM2 tdd.10MHz.TM2 tdd.20MHz.TM2 tdd.5MHz.TM5 tdd.10MHz.TM5 tdd.20MHz.TM5 tdd.5MHz.TM6 tdd.10MHz.TM6 tdd.20MHz.TM6</tags>
+      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="010205">
+      <class>execution</class>
+      <desc>Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to  UE, and check that there is no packet losses</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -c26 -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -c26  -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -c26 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -c26  -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50  -x 2 -c26 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100  -x 2 -c26  -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25  -x 5 -c26  -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 5 -c26 -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 5 -c26  -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 6 -c26 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 6 -c26 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 6 -c26 -a </main_exec_args>
+      <tags>tdd.5MHz.TM1 tdd.10MHz.TM1 tdd.20MHz.TM1 tdd.5MHz.TM2 tdd.10MHz.TM2 tdd.20MHz.TM2 tdd.5MHz.TM5 tdd.10MHz.TM5 tdd.20MHz.TM5 tdd.5MHz.TM6 tdd.10MHz.TM6 tdd.20MHz.TM6</tags>
+      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="010300">
+      <class>execution</class>
+      <desc>Run OAISIM Rel10 FDD, 1 eNB + 1 UE 1 eNB (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -F
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50  -x 2 -F
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100  -x 2 -F
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25  -x 5 -F 
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 5 -F
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 5 -F 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 6 -F 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 6 -F
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 6 -F</main_exec_args>
+      <tags>FDD.5MHz.TM1 FDD.10MHz.TM1 FDD.20MHz.TM1 FDD.5MHz.TM2 FDD.10MHz.TM2 FDD.20MHz.TM2 FDD.5MHz.TM5 FDD.10MHz.TM5 FDD.20MHz.TM5 FDD.5MHz.TM6 FDD.10MHz.TM6 FDD.20MHz.TM6</tags>
+      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="010301">
+      <class>execution</class>
+      <desc>Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -F -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50  -x 2 -F -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100  -x 2 -F -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25  -x 5 -F  -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 5 -F -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 5 -F  -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 6 -F  -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 6 -F -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 6 -F -a</main_exec_args>
+      <tags>FDD.5MHz.TM1 FDD.10MHz.TM1 FDD.20MHz.TM1 FDD.5MHz.TM2 FDD.10MHz.TM2 FDD.20MHz.TM2 FDD.5MHz.TM5 FDD.10MHz.TM5 FDD.20MHz.TM5 FDD.5MHz.TM6 FDD.10MHz.TM6 FDD.20MHz.TM6</tags> 
+      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="010302">
+      <class>execution</class>
+      <desc> Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -F
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -F
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -F
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -F
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50  -x 2 -F
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100  -x 2 -F
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25  -x 5 -F 
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 5 -F
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 5 -F 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 6 -F 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 6 -F
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 6 -F </main_exec_args>
+      <tags>FDD.5MHz.TM1 FDD.10MHz.TM1 FDD.20MHz.TM1 FDD.5MHz.TM2 FDD.10MHz.TM2 FDD.20MHz.TM2 FDD.5MHz.TM5 FDD.10MHz.TM5 FDD.20MHz.TM5 FDD.5MHz.TM6 FDD.10MHz.TM6 FDD.20MHz.TM6</tags> 
+      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="010303">
+      <class>execution</class>
+      <desc>Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -F -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -F -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -F -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -F -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50  -x 2 -F -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100  -x 2 -F -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25  -x 5 -F  -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 5 -F -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 5 -F -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 6 -F  -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 6 -F -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 6 -F -a</main_exec_args>
+      <tags>FDD.5MHz.TM1 FDD.10MHz.TM1 FDD.20MHz.TM1 FDD.5MHz.TM2 FDD.10MHz.TM2 FDD.20MHz.TM2 FDD.5MHz.TM5 FDD.10MHz.TM5 FDD.20MHz.TM5 FDD.5MHz.TM6 FDD.10MHz.TM6 FDD.20MHz.TM6</tags>
+      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="010304">
+      <class>execution</class>
+      <desc>Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) without PHY_ABSTRACTION mode, ping from from eNB to UE, and for check for no packet losses</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -c26
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -F -c26
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F -c26
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F -c26
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50  -x 2 -F -c26
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100  -x 2 -F -c26
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25  -x 5 -F -c26
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 5 -F -c26
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 5 -F -c26 
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 6 -F  -c26
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 6 -F -c26
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 6 -F -c26</main_exec_args>
+      <tags>FDD.5MHz.TM1 FDD.10MHz.TM1 FDD.20MHz.TM1 FDD.5MHz.TM2 FDD.10MHz.TM2 FDD.20MHz.TM2 FDD.5MHz.TM5 FDD.10MHz.TM5 FDD.20MHz.TM5 FDD.5MHz.TM6 FDD.10MHz.TM6 FDD.20MHz.TM6</tags>
+      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="010305">
+      <class>execution</class>
+      <desc>Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION  mode, send ping from from eNB to UE, and check for no packet losses</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -c26 -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -F -c26 -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F -c26 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F -c26 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50  -x 2 -F -c26 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100  -x 2 -F -c26 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25  -x 5 -F -c26 -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 5 -F -c26 -a
+                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 5 -F -c26  -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 6 -F  -c26 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 6 -F -c26 -a
+                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 6 -F -c26 -a </main_exec_args>
+      <tags>FDD.5MHz.TM1 FDD.10MHz.TM1 FDD.20MHz.TM1 FDD.5MHz.TM2 FDD.10MHz.TM2 FDD.20MHz.TM2 FDD.5MHz.TM5 FDD.10MHz.TM5 FDD.20MHz.TM5 FDD.5MHz.TM6 FDD.10MHz.TM6 FDD.20MHz.TM6</tags>
+      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="010400">
+      <class>execution</class>
+      <desc>Check if eMBMS procedure is not finished completely, make sure that the SIB13/MCCH have been correclty received by UEs</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -x 1 -Q3 -n 100 -b1 -u1</main_exec_args>
+      <search_expr_true>"Found MBSFNAreaConfiguration from eNB 0"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="010401">
+      <class>execution</class>
+      <desc>Check if eMBMS multicast/broadcast data is received, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -x 1 -T mscbr -Q3 -n 100 -b1 -u1</main_exec_args>
+      <search_expr_true>"Received a multicast packet"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="010402">
+      <class>execution</class>
+      <desc>Check for eMBMS multicast/broadcast data received in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -F -T mscbr -x 1 -Q3 -n 100 -b1 -u1</main_exec_args>
+      <search_expr_true>"Received a multicast packet"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="010403">
+      <class>execution</class>
+      <desc>Check for eMBMS multicast/broadcast DF relaying working properly in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>oaisim_nos1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>oaisim_nos1</main_exec>
+      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -c43 -F -T mbvbr -Q4 -j1 -n120</main_exec_args>
+      <search_expr_true>"MTCH for sync area 1"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="015000">
+      <class>execution</class>
+      <desc>test_aes128_cmac_encrypt</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>test_aes128_cmac_encrypt</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec></pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>test_aes128_cmac_encrypt</main_exec>
+      <main_exec_args> --verbose</main_exec_args>
+      <search_expr_true>"finished with 0 errors"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="015001">
+      <class>execution</class>
+      <desc>test_aes128_ctr_decrypt</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>test_aes128_ctr_decrypt</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec></pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>test_aes128_ctr_decrypt</main_exec>
+      <main_exec_args> --verbose</main_exec_args>
+      <search_expr_true>"finished with 0 errors"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="015002">
+      <class>execution</class>
+      <desc>test_aes128_ctr_encrypt</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>test_aes128_ctr_encrypt</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec></pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>test_aes128_ctr_encrypt</main_exec>
+      <main_exec_args> --verbose</main_exec_args>
+      <search_expr_true>"finished with 0 errors"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="015003">
+      <class>execution</class>
+      <desc>test_secu_kenb</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>test_secu_kenb</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec></pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>test_secu_kenb</main_exec>
+      <main_exec_args> --verbose</main_exec_args>
+      <search_expr_true>"finished with 0 errors"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="015004">
+      <class>execution</class>
+      <desc>test_secu_knas</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>test_secu_knas</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec></pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>test_secu_knas</main_exec>
+      <main_exec_args> --verbose</main_exec_args>
+      <search_expr_true>"finished with 0 errors"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="015005">
+      <class>execution</class>
+      <desc>test_secu_knas_encrypt_eea1</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>test_secu_knas_encrypt_eea1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec></pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>test_secu_knas_encrypt_eea1</main_exec>
+      <main_exec_args> --verbose</main_exec_args>
+      <search_expr_true>"finished with 0 errors"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="015006">
+      <class>execution</class>
+      <desc>test_secu_knas_encrypt_eea2</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>test_secu_knas_encrypt_eea2</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec></pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>test_secu_knas_encrypt_eea2</main_exec>
+      <main_exec_args> --verbose</main_exec_args>
+      <search_expr_true>"finished with 0 errors"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+   <testCase id="015007">
+      <class>execution</class>
+      <desc>test_secu_knas_encrypt_eia1</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>test_secu_knas_encrypt_eia1</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec></pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>test_secu_knas_encrypt_eia1</main_exec>
+      <main_exec_args> --verbose</main_exec_args>
+      <search_expr_true>"finished with 0 errors"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+   <testCase id="015008">
+      <class>execution</class>
+      <desc>test_secu_knas_encrypt_eia2</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>test_secu_knas_encrypt_eia2</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec></pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>test_secu_knas_encrypt_eia2</main_exec>
+      <main_exec_args> --verbose</main_exec_args>
+      <search_expr_true>"finished with 0 errors"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+   <testCase id="015009">
+      <class>execution</class>
+      <desc>test_kdf</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>test_kdf</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec></pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>test_kdf</main_exec>
+      <main_exec_args> --verbose</main_exec_args>
+      <search_expr_true>"finished with 0 errors"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="015100">
+      <class>execution</class>
+      <desc>dlsim test cases (Test 1: 10 MHz, R2.FDD (MCS 5), EVA5, -1dB), 
+      (Test 5: 1.4 MHz, R4.FDD (MCS 4), EVA5, 0dB (70%)),
+      (Test 6, 10 MHz, R3.FDD (MCS 15), EVA5, 6.7dB (70%)),
+      (Test 6b, 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (70%)),
+      (Test 7, 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (30%)),
+      (Test 7b, 5 MHz, R3-1.FDD (MCS 15), ETU70, 1.4 dB (30%)),
+      (Test 10, 5 MHz, R6.FDD (MCS 25), EVA5, 17.4 dB (70%)),
+      (Test 10b, 5 MHz, R6-1.FDD (MCS 24,18 PRB), EVA5, 17.5dB (70%)),
+      (Test 11, 10 MHz, R7.FDD (MCS 25), EVA5, 17.7dB (70%))
+       </desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>dlsim</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec></pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>dlsim</main_exec>
+      <main_exec_args> -m5 -gF -s-1 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L
+                       -m4 -gF -s0 -w1.0 -f.2 -n500 -B6 -c4 -z2 -O70
+                       -m15 -gF -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L
+                       -m14 -gF -s6.7 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70 -L
+                       -m15 -gG -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O30 -L
+                       -m14 -gG -s1.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O30 -L
+                       -m25 -gF -s17.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70 -L
+                       -m25 -gF -s17.5 -w1.0 -f.2 -n500 -B25 -c3 -z2 -r1022 -O70 -L
+                       -m26 -gF -s17.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L</main_exec_args>
+      <tags>test1 test5 test6 test6b test7 test7b test10 test10b test11</tags>
+      <search_expr_true>"passed"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+    <testCase id="015101">
+      <class>execution</class>
+      <desc>ulsim Test cases. (Test 1, 5 MHz, FDD (MCS 5), AWGN, 6dB), 
+             (Test 2, 5 MHz, FDD (MCS 16), AWGN , 12dB (70%)),
+             (Test 3, 10 MHz, R3.FDD (MCS 5), AWGN, 6dB (70%)),
+             (Test 4, 10 MHz, R3-1.FDD (MCS 16), AWGN, 12dB (70%)),
+             (Test 5, 20 MHz, FDD (MCS 5), AWGN, 6dB (70%)),
+             (Test 6, 20 MHz, FDD (MCS 16), AWGN, 12 dB (70%))</desc>
+      <pre_compile_prog></pre_compile_prog>
+      <compile_prog>ulsim</compile_prog>
+      <compile_prog_args></compile_prog_args>
+      <pre_exec></pre_exec>
+      <pre_exec_args></pre_exec_args>
+      <main_exec>ulsim</main_exec>
+      <main_exec_args> -B25 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L
+                       -B25 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L
+                        -B50 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L 
+                       -B50 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L
+                        -B100 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L
+                       -B100 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L</main_exec_args>
+     <tags>test1 test2 test3 test4 test5 test6</tags>
+      <search_expr_true>"passed"</search_expr_true>
+      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
+      <nruns>3</nruns>
+    </testCase>
+
+
   </testCaseList>
 
-
-
-
 </xml>
 
 

cmake_targets/tools/test_helper

@@ -33,7 +33,7 @@ xUnit_fail() {
   currtime=$(date +%s.%N)
   time=$(echo "$currtime - $XUNIT_START" | bc -l)
   xml="<testcase classname='$class' name='$test_case' run='$run_index' time='$time' RESULT='$result'></testcase>"
-  XUNIT_TESTCASES_XML="$xml \n$XUNIT_TESTCASES_XML"
+  XUNIT_TESTCASES_XML="$XUNIT_TESTCASES_XML \n$xml"
   XUNIT_FAILED=$((XUNIT_FAILED+1))
 }
 
@@ -52,7 +52,7 @@ xUnit_success() {
   currtime=$(date +%s.%N)
   time=$(echo "$currtime - $XUNIT_START" | bc -l)
   xml="<testcase classname='$class' name='$test_case' run='$run_index' time='$time' RESULT='$result'></testcase>"
-  XUNIT_TESTCASES_XML="$xml \n$XUNIT_TESTCASES_XML"
+  XUNIT_TESTCASES_XML="$XUNIT_TESTCASES_XML \n$xml"
   XUNIT_SUCCESS=$((XUNIT_SUCCESS+1))
 }