maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

removing some dead code

Browse Source
This commit is contained in:
Florian Kaltenberger
2018-09-30 09:54:34 -07:00
parent 3547d525f4
commit 9f5f0ade7e
3 changed files with 0 additions and 122 deletions
Download Patch File Download Diff File Expand all files Collapse all files
openair1/SCHED/ru_procedures.c
-4
View File
@@ -50,10 +50,6 @@
#include "targets/RT/USER/rt_wrapper.h"
// RU OFDM Modulator, used in IF4p5 RRU, RCC/RAU with IF5, eNodeB
extern openair0_config_t openair0_cfg[MAX_CARDS];
extern int oai_exit;
targets/RT/USER/lte-enb.c
-2
View File
@@ -111,8 +111,6 @@ extern volatile int start_UE;
#endif
extern volatile int oai_exit;
extern openair0_config_t openair0_cfg[MAX_CARDS];
extern int transmission_mode;
extern int oaisim_flag;
targets/RT/USER/lte-softmodem.c
-116
View File
@@ -171,8 +171,6 @@ double rx_gain_off = 0.0;
double sample_rate=30.72e6;
double bw = 10.0e6;
static int tx_max_power[MAX_NUM_CCs]; /* = {0,0}*/;
char rf_config_file[1024];
int chain_offset=0;
@@ -199,7 +197,6 @@ int otg_enabled;
//int number_of_cards = 1;
static LTE_DL_FRAME_PARMS *frame_parms[MAX_NUM_CCs];
uint32_t target_dl_mcs = 28; //maximum allowed mcs
uint32_t target_ul_mcs = 20;
uint32_t timing_advance = 0;
@@ -250,8 +247,6 @@ WORKER_CONF_t get_thread_worker_conf(void)
/* struct for ethernet specific parameters given in eNB conf file */
eth_params_t *eth_params;
openair0_config_t openair0_cfg[MAX_CARDS];
double cpuf;
extern char uecap_xer[1024];
@@ -632,112 +627,6 @@ void set_default_frame_parms(LTE_DL_FRAME_PARMS *frame_parms[MAX_NUM_CCs]) {
}
void init_openair0(void) {
int card;
int i;
for (card=0; card<MAX_CARDS; card++) {
openair0_cfg[card].mmapped_dma=mmapped_dma;
openair0_cfg[card].configFilename = NULL;
if(frame_parms[0]->N_RB_DL == 100) {
if(numerology == 0)
{
if (frame_parms[0]->threequarter_fs) {
openair0_cfg[card].sample_rate=23.04e6;
openair0_cfg[card].samples_per_frame = 230400;
openair0_cfg[card].tx_bw = 10e6;
openair0_cfg[card].rx_bw = 10e6;
} else {
openair0_cfg[card].sample_rate=30.72e6;
openair0_cfg[card].samples_per_frame = 307200;
openair0_cfg[card].tx_bw = 10e6;
openair0_cfg[card].rx_bw = 10e6;
}
}else if(numerology == 1)
{
openair0_cfg[card].sample_rate=61.44e6;
openair0_cfg[card].samples_per_frame = 307200;
openair0_cfg[card].tx_bw = 20e6;
openair0_cfg[card].rx_bw = 20e6;
}else if(numerology == 2)
{
openair0_cfg[card].sample_rate=122.88e6;
openair0_cfg[card].samples_per_frame = 307200;
openair0_cfg[card].tx_bw = 20e6;
openair0_cfg[card].rx_bw = 20e6;
}else
{
printf("Un supported numerology\n");
}
} else if(frame_parms[0]->N_RB_DL == 50) {
openair0_cfg[card].sample_rate=15.36e6;
openair0_cfg[card].samples_per_frame = 153600;
openair0_cfg[card].tx_bw = 5e6;
openair0_cfg[card].rx_bw = 5e6;
} else if (frame_parms[0]->N_RB_DL == 25) {
openair0_cfg[card].sample_rate=7.68e6;
openair0_cfg[card].samples_per_frame = 76800;
openair0_cfg[card].tx_bw = 2.5e6;
openair0_cfg[card].rx_bw = 2.5e6;
} else if (frame_parms[0]->N_RB_DL == 6) {
openair0_cfg[card].sample_rate=1.92e6;
openair0_cfg[card].samples_per_frame = 19200;
openair0_cfg[card].tx_bw = 1.5e6;
openair0_cfg[card].rx_bw = 1.5e6;
}
if (frame_parms[0]->frame_type==TDD)
openair0_cfg[card].duplex_mode = duplex_mode_TDD;
else //FDD
openair0_cfg[card].duplex_mode = duplex_mode_FDD;
printf("HW: Configuring card %d, nb_antennas_tx/rx %d/%d\n",card,
RC.eNB[0][0]->frame_parms.nb_antennas_tx ,
RC.eNB[0][0]->frame_parms.nb_antennas_rx );
openair0_cfg[card].Mod_id = 0;
openair0_cfg[card].num_rb_dl=frame_parms[0]->N_RB_DL;
openair0_cfg[card].clock_source = clock_source;
openair0_cfg[card].tx_num_channels=min(2,RC.eNB[0][0]->frame_parms.nb_antennas_tx );
openair0_cfg[card].rx_num_channels=min(2,RC.eNB[0][0]->frame_parms.nb_antennas_rx );
for (i=0; i<4; i++) {
if (i<openair0_cfg[card].tx_num_channels)
openair0_cfg[card].tx_freq[i] = downlink_frequency[0][i] ;
else
openair0_cfg[card].tx_freq[i]=0.0;
if (i<openair0_cfg[card].rx_num_channels)
openair0_cfg[card].rx_freq[i] =downlink_frequency[0][i] + uplink_frequency_offset[0][i] ;
else
openair0_cfg[card].rx_freq[i]=0.0;
openair0_cfg[card].autocal[i] = 1;
openair0_cfg[card].tx_gain[i] = tx_gain[0][i];
openair0_cfg[card].rx_gain[i] = RC.eNB[0][0]->rx_total_gain_dB;
openair0_cfg[card].configFilename = rf_config_file;
printf("Card %d, channel %d, Setting tx_gain %f, rx_gain %f, tx_freq %f, rx_freq %f\n",
card,i, openair0_cfg[card].tx_gain[i],
openair0_cfg[card].rx_gain[i],
openair0_cfg[card].tx_freq[i],
openair0_cfg[card].rx_freq[i]);
}
} /* for loop on cards */
}
void wait_RUs(void) {
LOG_I(PHY,"Waiting for RUs to be configured ... RC.ru_mask:%02lx\n", RC.ru_mask);
@@ -922,9 +811,6 @@ int main( int argc, char **argv )
mode = normal_txrx;
memset(&openair0_cfg[0],0,sizeof(openair0_config_t)*MAX_CARDS);
memset(tx_max_power,0,sizeof(int)*MAX_NUM_CCs);
set_latency_target();
@@ -1283,8 +1169,6 @@ int main( int argc, char **argv )
pthread_mutex_destroy(&ue_pf_po_mutex);
// *** Handle per CC_id openair0
for(ru_id=0; ru_id<RC.nb_RU; ru_id++) {
if (RC.ru[ru_id]->rfdevice.trx_end_func) {