maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

(doc): Update O-RAN 7.2 FH tutorial and configuration

Browse Source 
- Update the configuration for benetel 650 and 550 for new firmware version
- Remove the old firmware configuration file and description in the document
- Add a new RU configuration section
- Add How to get support from the OAI Community to clarify the support procedure.
This commit is contained in:
arora
2024-04-15 11:35:22 +02:00
committed by Robert Schmidt
parent c08fb6ccb0
commit b74fc09c28
4 changed files with 527 additions and 69 deletions
Download Patch File Download Diff File Expand all files Collapse all files
doc/ORAN_FHI7.2_Tutorial.md
+198 -45
View File
@@ -20,11 +20,11 @@
The hardware on which we have tried this tutorial:
|Hardware (CPU,RAM) |Operating System (kernel) |NIC (Vendor,Driver,Firmware) |
|--------------------------------------------|----------------------------------|-------------------------------------------------|
|Intel(R) Xeon(R) Gold 6354 36-Core, 128GB |RHEL 9.2 (5.14.0-284.18.1.rt14.303.el9_2.x86_64)|Intel X710, i40e, 9.20 0x8000d95e 22.0.9|
|Intel(R) Xeon(R) Gold 6354 36-Core, 128GB |Ubuntu 22.04.3 LTS (5.15.0-1033-realtime)|Intel X710, i40e, 9.00 0x8000cfeb 21.5.9|
|AMD EPYC 9374F 32-Core Processor, 128GB |Ubuntu 22.04.2 LTS (5.15.0-1038-realtime) |Intel E810 ,ice, 4.00 0x8001184e 1.3236.0 |
|Hardware (CPU,RAM) |Operating System (kernel) |NIC (Vendor,Driver,Firmware) |
|-----------------------------------------|------------------------------------------------|-----------------------------------------|
|Intel(R) Xeon(R) Gold 6354 36-Core, 128GB|RHEL 9.2 (5.14.0-284.18.1.rt14.303.el9_2.x86_64)|Intel X710, i40e, 9.20 0x8000d95e 22.0.9 |
|Intel(R) Xeon(R) Gold 6354 36-Core, 128GB|Ubuntu 22.04.3 LTS (5.15.0-1033-realtime) |Intel X710, i40e, 9.00 0x8000cfeb 21.5.9 |
|AMD EPYC 9374F 32-Core Processor, 128GB |Ubuntu 22.04.2 LTS (5.15.0-1038-realtime) |Intel E810 ,ice, 4.00 0x8001184e 1.3236.0|
**NOTE**: These are not minimum hardware requirements. This is the configuration of our servers. The NIC card should support hardware PTP time stamping.
@@ -37,6 +37,8 @@ NICs we have tested so far:
|E810-C |4.20 0x8001784e 22.0.9 |
|Intel XXV710 |6.02 0x80003888 |
**Note**: With AMD servers/desktop machines with PCIe 5.0 we have only used E810 cards.
PTP enabled switches and grandmaster clock we have in are lab:
|Vendor |Software Version|
@@ -45,8 +47,7 @@ PTP enabled switches and grandmaster clock we have in are lab:
|Fibrolan Falcon-RX/812/G|8.0.25.4 |
|Qulsar Qg2 (Grandmaster)|12.1.27 |
**S-Plane synchronization is mandatory.** S-plane support is done via `ptp4l`
and `phc2sys`.
**S-Plane synchronization is mandatory.** S-plane support is done via `ptp4l` and `phc2sys`. Make sure your version matches.
| Software | Software Version |
|-----------|------------------|
@@ -57,12 +58,12 @@ We have only verified LLS-C3 configuration in our lab, i.e. using an external
grandmaster, a switch as a boundary clock, and the gNB/DU and RU. We haven't
tested any RU without S-plane. Radio units we are testing/integrating:
|Vendor |Software Version |
|-----------------|-----------------|
|VVDN LPRU |03-v3.0.4 |
|LiteON RU |01.00.08/02.00.03|
|Benetel 650 |v0.8.1 |
|Benetel 550 CAT-A|v0.8.1 |
|Vendor |Software Version |
|-----------------|----------------------|
|VVDN LPRU |03-v3.0.5 |
|LiteON RU |01.00.08/02.00.03 |
|Benetel 650 |RAN650-1v1.0.4-dda1bf5|
|Benetel 550 CAT-A|RAN550-1v1.0.4-605a25a|
Tested libxran releases:
@@ -70,7 +71,7 @@ Tested libxran releases:
|-----------------------------------------|
| `oran_e_maintenance_release_v1.0` |
**Note**: the libxran driver of OAI identifies the above version as "5.1.0" (E is fifth letter, then 1.0).
**Note**: The libxran driver of OAI identifies the above version as "5.1.0" (E is fifth letter, then 1.0).
## Configure your server
@@ -114,7 +115,7 @@ Modifying the `linux` command line usually requires to edit string `GRUB_CMDLINE
* Set parameters `isolcpus`, `nohz_full` and `rcu_nocbs` with the list of CPUs to isolate for XRAN.
* Set parameter `kthread_cpus` with the list of CPUs to isolate for kernel.
Set the `tuned` profile to `realtime`. If the `tuned-adm` command is not installed then you have to install it. When choosing this profile you have to mention the isolated cpus in `/etc/tuned/realtime-variables.conf`. By default this profile adds `skew_tick=1 isolcpus=managed_irq,domain,<cpu-you-choose> intel_pstate=disable nosoftlockup tsc=nowatchdog` in the boot command. **Make sure you don't add them while changing `/etc/default/grub`**.
Set the `tuned` profile to `realtime`. If the `tuned-adm` command is not installed then you have to install it. When choosing this profile you have to mention the isolated cpus in `/etc/tuned/realtime-variables.conf`. By default this profile adds `skew_tick=1 isolcpus=managed_irq,domain,<cpu-you-choose> intel_pstate=disable nosoftlockup` in the boot command. **Make sure you don't add them while changing `/etc/default/grub`**.
```bash
tuned-adm profile realtime
@@ -133,7 +134,7 @@ NUMA:
```
```bash
isolcpus=0-15 nohz_full=0-15 rcu_nocbs=0-15 kthread_cpus=16-31 rcu_nocb_poll nosoftlockup default_hugepagesz=1GB hugepagesz=1G hugepages=20 amd_iommu=on iommu=pt mitigations=off skew_tick=1 selinux=0 enforcing=0 tsc=nowatchdog nmi_watchdog=0 softlockup_panic=0 audit=0 vt.handoff=7
isolcpus=0-15 nohz_full=0-15 rcu_nocbs=0-15 kthread_cpus=16-31 rcu_nocb_poll nosoftlockup default_hugepagesz=1GB hugepagesz=1G hugepages=20 amd_iommu=on iommu=pt mitigations=off skew_tick=1 selinux=0 enforcing=0 tsc=reliable nmi_watchdog=0 softlockup_panic=0 audit=0 vt.handoff=7
```
Example taken for AMD EPYC 9374F 32-Core Processor
@@ -150,7 +151,7 @@ NUMA:
```
```bash
mitigations=off usbcore.autosuspend=-1 intel_iommu=on intel_iommu=pt selinux=0 enforcing=0 nmi_watchdog=0 softlockup_panic=0 audit=0 skew_tick=1 isolcpus=managed_irq,domain,0,2,4,6,8,10,12,14,16 nohz_full=0,2,4,6,8,10,12,14,16 rcu_nocbs=0,2,4,6,8,10,12,14,16 rcu_nocb_poll intel_pstate=disable nosoftlockup tsc=nowatchdog cgroup_disable=memory mce=off hugepagesz=1G hugepages=40 hugepagesz=2M hugepages=0 default_hugepagesz=1G isolcpus=managed_irq,domain,0,2,4,6,8,10,12,14 kthread_cpus=18-35 intel_pstate=disable nosoftlockup tsc=reliable
mitigations=off usbcore.autosuspend=-1 intel_iommu=on intel_iommu=pt selinux=0 enforcing=0 nmi_watchdog=0 softlockup_panic=0 audit=0 skew_tick=1 isolcpus=managed_irq,domain,0,2,4,6,8,10,12,14,16 nohz_full=0,2,4,6,8,10,12,14,16 rcu_nocbs=0,2,4,6,8,10,12,14,16 rcu_nocb_poll intel_pstate=disable nosoftlockup cgroup_disable=memory mce=off hugepagesz=1G hugepages=40 hugepagesz=2M hugepages=0 default_hugepagesz=1G isolcpus=managed_irq,domain,0,2,4,6,8,10,12,14 kthread_cpus=18-35 intel_pstate=disable nosoftlockup tsc=reliable
```
Example taken for Intel(R) Xeon(R) Gold 6354 CPU @ 3.00GHz
@@ -202,7 +203,8 @@ summary_interval 0
network_transport L2
hybrid_e2e 0
```
Probably you need to increase `tx_timestamp_timeout` to 50 or 100 for Intel E-810. You will see that in the logs of ptp.
You need to increase `tx_timestamp_timeout` to 50 or 100 for Intel E-810. You will see that in the logs of ptp.
Create the configuration file for ptp4l (`/etc/sysconfig/ptp4l`)
@@ -269,15 +271,15 @@ timedatectl set-ntp false
## DPDK (Data Plane Development Kit)
Download DPDK version 20.11.7.
Download DPDK version 20.11.9.
```bash
# on debian
sudo apt install wget xz-utils
sudo apt install wget xz-utils libnuma-dev
# on Fedora/RHEL
sudo dnf install wget xz
sudo dnf install wget xz numactl-devel
cd
wget http://fast.dpdk.org/rel/dpdk-20.11.7.tar.xz
wget http://fast.dpdk.org/rel/dpdk-20.11.9.tar.xz
```
### DPDK Compilation and Installation
@@ -288,7 +290,7 @@ wget http://fast.dpdk.org/rel/dpdk-20.11.7.tar.xz
sudo apt install meson
# on Fedora/RHEL
sudo dnf install meson
tar xvf dpdk-20.11.7.tar.xz && cd dpdk-stable-20.11.7
tar xvf dpdk-20.11.9.tar.xz && cd dpdk-stable-20.11.9
meson build
ninja -C build
@@ -354,7 +356,7 @@ pkg-config --libs libdpdk --static
Go back to the version folder you used to build and install
```
cd ~/dpdk-stable-20.11.7
cd ~/dpdk-stable-20.11.9
sudo ninja deinstall -C build
```
@@ -392,7 +394,7 @@ environment variables `RTE_SDK` for the path to the source tree of DPDK, and
```bash
cd ~/phy/fhi_lib/lib
make clean
RTE_SDK=~/dpdk-stable-20.11.7/ XRAN_DIR=~/phy/fhi_lib make XRAN_LIB_SO=1
RTE_SDK=~/dpdk-stable-20.11.9/ XRAN_DIR=~/phy/fhi_lib make XRAN_LIB_SO=1
...
[AR] build/libxran.so
./build/libxran.so
@@ -413,11 +415,8 @@ so now, too.
```bash
# You should have already cloned above
cd ~/openairinterface5g/cmake_targets
# on debian
sudo apt install -y libnuma-dev
# on RHEL
sudo dnf install -y numactl-devel
export PKG_CONFIG_PATH=/opt/dpdk/lib64/pkgconfig/
# if you installed DPDK in a custom path as described above
export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/local/lib64/pkgconfig/
./build_oai -I # if you never installed OAI, use this command once before the next line
./build_oai --gNB --ninja -t oran_fhlib_5g --cmake-opt -Dxran_LOCATION=$HOME/phy/fhi_lib/lib
```
@@ -462,16 +461,148 @@ ninja nr-softmodem oran_fhlib_5g params_libconfig
# Configuration
RU and DU configurations have a circular dependency: you have to configure DU MAC address in the RU configuration and the RU MAC address, VLAN and Timing advance parameters in the DU configuration.
**Note**: You may run OAI with O-RAN 7.2 Fronthaul without a RU attached (e.g. for benchmarking).
In such case, skip RU configuration and go through Network Interfaces, DPDK VFs and OAI configuration by using arbitrary values for RU MAC addresses and VLAN tags.
In such case, skip RU configuration and only configure Network Interfaces, DPDK VFs and OAI configuration by using arbitrary values for RU MAC addresses and VLAN tags.
## Configure the RU
Contact the RU vendor to get the configuration manual, and configure the RU
appropriately. You can orient on the OAI configuration files mentioned further
below.
Contact the RU vendor and get the configuration manual to understand the below commands. The below configuration only corresponds to the RU firmware version indicated at the start of this document. If your firmware version does not correspond to the indicated version, then please don't try these commands.
We are evaluating if we can share RU configuration steps.
**NOTE**: Please understand all the changes you are doing at the RU, especially if you are manipulating anything related to output power.
### Benetel 650
- **Valid only for version RAN650-1v1.0.4-dda1bf5**
- TDD pattern `DDDDDDDSUU`, 5ms
- Bandwidth 100MHz
- MTU 9216 (this is the maximum we can configure on our switch)
- 4TX4R
- The OAI configuration file [`gnb.sa.band78.273prb.fhi72.4x4-benetel650.conf`](../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.273prb.fhi72.4x4-benetel650.conf) corresponds to below RU configuration.
After switching on the radio or rebooting, wait for the radio bring up to complete, which you can follow using `tail -f /tmp/logs/radio_status`. Once you will see `[INFO] Radio bringup complete`, you can configure the RU via editing `/etc/ru_config.cfg`
```bash
cat /etc/ru_config.cfg
mimo_mode=1_2_3_4_4x4
downlink_scaling=0
prach_format=short
compression=static_compressed
lf_prach_compression_enable=true
cplane_per_symbol_workaround=disabled
cuplane_dl_coupling_sectionID=disabled
flexran_prach_workaround=disabled
dl_ul_tuning_special_slot=0xfd00000
```
### Benetel 550
- **Valid only for version RAN550-1v1.0.4-605a25a**
- TDD pattern `DDDDDDDSUU`, 5ms
- Bandwidth 100MHz
- 4TX4R
- The OAI configuration file [`gnb.sa.band78.273prb.fhi72.4x4-benetel550.conf`](../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.273prb.fhi72.4x4-benetel550.conf) corresponds to below RU configuration.
After switching on the radio or rebooting, wait for the radio bring up to complete, which you can follow using `tail -f /tmp/logs/radio_status`. Once you will see `[INFO] Radio bringup complete`, you can configure the RU via editing `/etc/ru_config.cfg`
```bash
cat /etc/ru_config.cfg
mimo_mode=1_2_3_4_4x4
downlink_scaling=0
prach_format=short
compression=static_compressed
lf_prach_compression_enable=true
cplane_per_symbol_workaround=disabled
cuplane_dl_coupling_sectionID=disabled
flexran_prach_workaround=disabled
dl_tuning_special_slot=0x13b6
```
### LiteON
- TDD pattern `DDDSU`, 2.5ms
- Bandwidth 100MHz
- Default MTU is 1500
SSH to the unit as user `user`. Write `enable` in the terminal to enter the configuration console; the password should be in the user guide. Use the command `show oru-status` to check the RU status. The output should be similar to:
```bash
# show oru-status
Sync State : SYNCHRONIZED
RF State : Ready
DPD : Ready
```
Once the RU is PTP synced, and RF state and DPD are `Ready`, write `configure` in the terminal to set:
- Center frequency
- Bandwidth
- Compression Bitwidth
- TX/RX attenuation
To configure 4TX and 4RX antennas, you have to repeat the below steps after every reboot, so don't restart the RU after entering below commands:
```bash
devmem 0x80001014 32 0x00050004
devmem 0x80001018 32 0x00070006
devmem 0x8000201C 32 0x00000001
```
If you want to set MTU size to 9000 then use the below command:
```bash
devmem 0x8000200C 32 0x00000001
```
### VVDN LPRU
- TDD pattern `DDDSU`, 2.5ms
- Bandwidth 100MHz
- MTU 9216 (this is the maximum we can configure on our switch)
- The OAI configuration file [`gnb.sa.band77.273prb.fhi72.4x4-vvdn.conf`](../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band77.273prb.fhi72.4x4-vvdn.conf) corresponds to below RU configuration.
Check in the RU user manual how to configure the center frequency. There are multiple ways to do it. We set the center frequency by editing `sysrepocfg` database. You can use `sysrepocfg --edit=vi -d running` to do the same. You can edit the `startup` database to make the center frequency change persistent.
To make any change in the RU, always wait for it to be PTP synced. You can check the sync status via `tail -f /var/log/synctimingptp2.log`.
To set the RU for 4TX and 4RX antennas with 9 bit compression, you need to create this XML file and apply it.
Login to the ru and create this file as `4x4-config.xml`.
```xml
<vvdn_config>
<du_mac_address>YOUR-DU-MAC-ADDR</du_mac_address>
<cu_plane_vlan>YOUR-RU-VLAN</cu_plane_vlan>
<dl_compression_method>1</dl_compression_method>
<dl_compression_value>9</dl_compression_value>
<ul_compression_method>1</ul_compression_method>
<ul_compression_value>9</ul_compression_value>
<num_prb>273</num_prb>
<prach_layer0_PCID>4</prach_layer0_PCID>
<prach_layer1_PCID>5</prach_layer1_PCID>
<prach_layer2_PCID>6</prach_layer2_PCID>
<prach_layer3_PCID>7</prach_layer3_PCID>
<pxsch_layer0_PCID>0</pxsch_layer0_PCID>
<pxsch_layer1_PCID>1</pxsch_layer1_PCID>
<pxsch_layer2_PCID>2</pxsch_layer2_PCID>
<pxsch_layer3_PCID>3</pxsch_layer3_PCID>
</vvdn_config>
```
Execute the below commands on every restart
```bash
xml_parser 4x4-config.xml
## To enable prach compression
mw.l a0010024 1919
## This will show the current configuration
/etc/scripts/lpru_configuration.sh
## Edit the sysrepo to ACTIVATE the carrier when you want to use the RU
sysrepocfg --edit=vi -d running
```
## Configure Network Interfaces and DPDK VFs
@@ -489,9 +620,11 @@ In the following, we will use these short hands:
- `vlan`: VLAN tags as defined in the RU configuration
- `mtu`: the MTU as specified by the RU vendor, and supported by the NIC
- `du-c-plane-mac-addr`: DU C plane MAC address
- `lspci-address-c-plane-vf`: PCI bus address of the VF for C plane
- `pci-address-c-plane-vf`: PCI bus address of the VF for C plane
- `du-u-plane-mac-addr`: DU U plane MAC address
- `lspci-address-u-plane-vf`: PCI bus address of the VF for U plane
- `pci-address-u-plane-vf`: PCI bus address of the VF for U plane
In the configuration file, in option `fhi_72.dpdk_devices`, the first PCI address is for C-plane and the second for U-plane.
For both the MAC addresses, you might use the MAC addresses which are
pre-configured in the RUs (typically `00:11:22:33:44:66`, but that is not
@@ -570,17 +703,17 @@ Now, unbind any pre-existing DPDK devices, load the "Virtual Function I/O"
driver `vfio_pci`, and bind DPDK to these devices:
```
sudo /usr/local/bin/dpdk-devbind.py --unbind <lspci-address-c-plane-vf>
sudo /usr/local/bin/dpdk-devbind.py --unbind <lspci-address-u-plane-vf>
sudo /usr/local/bin/dpdk-devbind.py --unbind <pci-address-c-plane-vf>
sudo /usr/local/bin/dpdk-devbind.py --unbind <pci-address-u-plane-vf>
sudo modprobe vfio_pci
sudo /usr/local/bin/dpdk-devbind.py --bind vfio-pci <lspci-address-c-plane-vf>
sudo /usr/local/bin/dpdk-devbind.py --bind vfio-pci <lspci-address-u-plane-vf>
sudo /usr/local/bin/dpdk-devbind.py --bind vfio-pci <pci-address-c-plane-vf>
sudo /usr/local/bin/dpdk-devbind.py --bind vfio-pci <pci-address-u-plane-vf>
```
We recommand to put the above commands into a script file to quickly repeat them.
<details>
<summary>Example script for Benetel 650 with Intel X710 on host</summary>
<summary>Example script for Benetel 550-A/650 with Intel X710 on host</summary>
```console
set -x
@@ -589,11 +722,12 @@ sudo ethtool -G eno12409 rx 4096
sudo ethtool -G eno12409 tx 4096
sudo ifconfig eno12409 mtu 9216
sudo modprobe -r iavf
sudo modprobe iavf
sudo sh -c 'echo 0 > /sys/class/net/eno12409/device/sriov_numvfs'
sudo sh -c 'echo 2 > /sys/class/net/eno12409/device/sriov_numvfs'
sudo ip link set eno12409 vf 0 mac 00:11:22:33:44:67 vlan 3 qos 0 spoofchk off mtu 9216
sudo ip link set eno12409 vf 1 mac 00:11:22:33:44:66 vlan 3 qos 0 spoofchk off mtu 9216
sudo ip link set eno12409 vf 0 mac 00:11:22:33:44:66 vlan 3 qos 0 spoofchk off mtu 9216
sudo ip link set eno12409 vf 1 mac 00:11:22:33:44:67 vlan 3 qos 0 spoofchk off mtu 9216
sudo /usr/local/bin/dpdk-devbind.py --unbind 31:06.0
sudo /usr/local/bin/dpdk-devbind.py --unbind 31:06.1
@@ -604,13 +738,14 @@ sudo /usr/local/bin/dpdk-devbind.py --bind vfio-pci 31:06.1
</details>
## Configure OAI gNB
**Beware in the following section to let in the range of isolated cores the parameters that should be (i.e. `L1s.L1_rx_thread_core`, `L1s.L1_tx_thread_core`, `RUs.ru_thread_core`, `fhi_72.io_core` and `fhi_72.worker_cores`)**
Sample configuration files for OAI gNB, specific to the manufacturer of the radio unit, are available at:
1. LITE-ON RU: [`gnb.sa.band78.273prb.fhi72.4x4-liteon.conf`](../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.273prb.fhi72.4x4-liteon.conf) (band n78, 273 PRBs, 3.5GHz center freq, 4x4 antenna configuration with 9 bit I/Q samples (compressed) for PUSCH/PDSCH/PRACH, 2-layer DL MIMO, UL SISO)
2. Benetel 650 RU: [`gnb.sa.band78.273prb.fhi72.4x2-benetel650.conf`](../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.273prb.fhi72.4x2-benetel650.conf) (band n78, 273 PRBs, 3.5GHz center freq, 4x2 antenna configuration with 9 bit I/Q samples (compressed) for PUSCH/PDSCH/PRACH, 2-layer DL MIMO, UL SISO)
2. Benetel 650 RU: [`gnb.sa.band78.273prb.fhi72.4x4-benetel650.conf`](../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.273prb.fhi72.4x2-benetel650.conf) (band n78, 273 PRBs, 3.5GHz center freq, 4x2 antenna configuration with 9 bit I/Q samples (compressed) for PUSCH/PDSCH/PRACH, 2-layer DL MIMO, UL SISO)
3. VVDN RU: [`gnb.sa.band77.273prb.fhi72.4x4-vvdn.conf`](../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band77.273prb.fhi72.4x4-vvdn.conf) (band n77, 273 PRBs, 4.0GHz center freq, 4x4 antenna configuration with 9 bit I/Q samples (compressed) for PUSCH/PDSCH/PRACH, 2-layer DL MIMO, UL SISO)
Edit the sample OAI gNB configuration file and check following parameters:
@@ -753,3 +888,21 @@ In this case, you should reverify that `ptp4l` and `phc2sys` are working, e.g.,
do not do any jumps (during the last hour). While an occasional jump is not
necessarily problematic for the gNB, many such messages mean that the system is
not working, and UEs might not be able to attach or reach good performance.
# Contact in case of questions
You can ask your question on the [mailing lists](https://gitlab.eurecom.fr/oai/openairinterface5g/-/wikis/MailingList).
Your email should contain below information:
- A clear subject in your email.
- For all the queries there should be [Query\] in the subject of the email and for problems there should be [Problem\].
- In case of a problem, add a small description.
- Do not share any photos unless you want to share a diagram.
- OAI gNB/DU/CU/CU-CP/CU-UP configuration file in `.conf` format only.
- Logs of OAI gNB/DU/CU/CU-CP/CU-UP in `.log` or `.txt` format only.
- RU Vendor and Version.
- In case your question is related to performance, include a small description of the machine (CPU, RAM and networking card) and diagram of your testing environment.
- If you have any issues related to PTP or synchronization, then first check the section "Debugging PTP issues". Then share your problem with PTP version you are using, switch details and master clock.
- Known/open issues are present on [GitLab](https://gitlab.eurecom.fr/oai/openairinterface5g/-/issues), so keep checking.
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band77.273prb.fhi72.4x4-vvdn.conf
+1 -1
View File
@@ -26,7 +26,7 @@ gNBs =
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 11; #10; #thamizh change
controlResourceSetZero = 11;
searchSpaceZero = 0;
}
);
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.273prb.fhi72.4x4-benetel550.conf
+302
View File
@@ -0,0 +1,302 @@
Active_gNBs = ( "gNB-OAI");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gNB-OAI";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ( { sst = 1; }); });
nr_cellid = 1;
////////// Physical parameters:
pdsch_AntennaPorts_XP = 2;
pusch_AntennaPorts = 4;
do_CSIRS = 1;
do_SRS = 0 ;
sib1_tda = 15;
# force_UL256qam_off = 1;
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 11;
searchSpaceZero = 0;
}
);
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# n_TimingAdvanceOffset = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3450.72 MHz (center frequency)
absoluteFrequencySSB = 623328;
dl_frequencyBand = 78;
# this is 3401.58 MHz
dl_absoluteFrequencyPointA = 620052;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 273;
#initialDownlinkBWP
#genericParameters
initialDLBWPlocationAndBandwidth = 1099; #38.101-1 Table 5.3.2-1
#
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 11;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 273;
pMax = 23;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 1099;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 151;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 0;
preambleReceivedTargetPower = -100;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 8;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 3;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 5;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# this is the offset between the last PRACH preamble power and the Msg3 PUSCH, 2 times the field value in dB
msg3_DeltaPreamble = 2;
p0_NominalWithGrant = -96;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 0;
p0_nominal = -96;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 0x1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = 0;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ( { ipv4 = "172.21.6.5";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_NG_AMF = "enp193s0f0";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "172.21.16.51/22";
GNB_INTERFACE_NAME_FOR_NGU = "enp193s0f0";
GNB_IPV4_ADDRESS_FOR_NGU = "172.21.16.51/22";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 230;
pucch_TargetSNRx10 = 250;
dl_bler_target_upper=.35;
dl_bler_target_lower=.15;
ul_bler_target_upper=.35;
ul_bler_target_lower=.15;
pusch_FailureThres = 1000;
ul_max_mcs = 28;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 100;
pucch0_dtx_threshold = 80;
pusch_dtx_threshold = 10;
max_ldpc_iterations = 15;
tx_amp_backoff_dB = 12; # needs to match O-RU configuration
L1_rx_thread_core = 8;
L1_tx_thread_core = 10;
phase_compensation = 0; # needs to match O-RU configuration
}
);
RUs = (
{
local_rf = "no";
nb_tx = 4;
nb_rx = 4;
att_tx = 0
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
sf_extension = 0;
eNB_instances = [0];
ru_thread_core = 9;
sl_ahead = 10;
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000,0x00007fff, 0x0000];
tr_preference = "raw_if4p5"; # important: activate FHI7.2
do_precoding = 0; # needs to match O-RU configuration
}
);
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
ngap_log_level ="info";
f1ap_log_level ="info";
};
fhi_72 = {
dpdk_devices = ("0000:c1:11.0", "0000:c1:11.1");
system_core = 0;
io_core = 1;
worker_cores = (2);
du_addr = ("00:11:22:33:44:66", "00:11:22:33:44:67");
ru_addr = ("70:b3:d5:e1:5b:81", "70:b3:d5:e1:5b:81");
mtu = 9216;
file_prefix = "fhi_72";
fh_config = ({
Tadv_cp_dl = 125;
T2a_cp_dl = (259, 500);
T2a_cp_ul = (25, 500);
T2a_up = (134, 375);
Ta3 = (152, 160);
T1a_cp_dl = (419, 470);
T1a_cp_ul = (285, 336);
T1a_up = (294, 345);
Ta4 = (0, 200);
ru_config = {
iq_width = 9;
iq_width_prach = 9;
fft_size = 12;
};
prach_config = {
eAxC_offset = 4;
};
});
};
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.273prb.fhi72.4x2-benetel650.conf → targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.273prb.fhi72.4x4-benetel650.conf
+26 -23
View File
@@ -11,17 +11,18 @@ gNBs =
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ( { sst = 1; }); });
plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ( { sst = 1; sd=3; }); });
nr_cellid = 1;
////////// Physical parameters:
pdsch_AntennaPorts_XP = 2;
pusch_AntennaPorts = 2;
pusch_AntennaPorts = 4;
do_CSIRS = 1;
do_SRS = 0 ;
sib1_tda = 15;
#force_UL256qam_off = 1;
pdcch_ConfigSIB1 = (
{
@@ -42,7 +43,7 @@ gNBs =
absoluteFrequencySSB = 630048;
dl_frequencyBand = 78;
# this is 3401.58 MHz
dl_absoluteFrequencyPointA = 626772;
dl_absoluteFrequencyPointA = 620052;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
@@ -86,7 +87,7 @@ gNBs =
zeroCorrelationZoneConfig = 0;
preambleReceivedTargetPower = -100;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 7;
preambleTransMax = 8;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 3;
@@ -159,7 +160,6 @@ gNBs =
);
# ------- SCTP definitions
SCTP :
{
@@ -179,21 +179,22 @@ gNBs =
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_NG_AMF = "eno8303";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "172.21.16.108/22";
GNB_INTERFACE_NAME_FOR_NGU = "eno8303";
GNB_IPV4_ADDRESS_FOR_NGU = "172.21.16.108/22";
GNB_INTERFACE_NAME_FOR_NG_AMF = "enp193s0f0";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "172.21.16.51/22";
GNB_INTERFACE_NAME_FOR_NGU = "enp193s0f0";
GNB_IPV4_ADDRESS_FOR_NGU = "172.21.16.51/22";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 300;
pusch_TargetSNRx10 = 230;
pucch_TargetSNRx10 = 230;
dl_bler_target_upper=.35;
dl_bler_target_lower=.15;
@@ -203,6 +204,7 @@ MACRLCs = (
}
);
L1s = (
{
num_cc = 1;
@@ -210,9 +212,10 @@ L1s = (
prach_dtx_threshold = 100;
pucch0_dtx_threshold = 80;
pusch_dtx_threshold = 10;
tx_amp_backoff_dB = 20; # needs to match O-RU configuration
max_ldpc_iterations = 10;
tx_amp_backoff_dB = 12; # needs to match O-RU configuration
L1_rx_thread_core = 8;
L1_tx_thread_core = 10;
L1_tx_thread_core = 10; # relevant after merge of l1_tx_thread
phase_compensation = 0; # needs to match O-RU configuration
}
);
@@ -221,7 +224,7 @@ RUs = (
{
local_rf = "no";
nb_tx = 4;
nb_rx = 2;
nb_rx = 4;
att_tx = 0
att_rx = 0;
bands = [78];
@@ -229,7 +232,7 @@ RUs = (
max_rxgain = 75;
sf_extension = 0;
eNB_instances = [0];
ru_thread_core = 6;
ru_thread_core = 9;
sl_ahead = 10;
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000,0x00007fff, 0x0000];
@@ -269,23 +272,23 @@ log_config :
};
fhi_72 = {
dpdk_devices = ("0000:31:06.0", "0000:31:06.1");
dpdk_devices = ("0000:c1:11.0", "0000:c1:11.1");
system_core = 0;
io_core = 4;
io_core = 1;
worker_cores = (2);
du_addr = ("00:11:22:33:44:66", "00:11:22:33:44:67");
ru_addr = ("70:b3:d5:e1:5b:ff", "70:b3:d5:e1:5b:ff");
mtu = 9216;
file_prefix = "fhi_72";
fh_config = ({
Tadv_cp_dl = 25;
T2a_cp_dl = (285, 429);
T2a_cp_ul = (285, 429);
T2a_up = (134, 1087);
Tadv_cp_dl = 125;
T2a_cp_dl = (259, 500);
T2a_cp_ul = (25, 500);
T2a_up = (134, 375);
Ta3 = (152, 160);
T1a_cp_dl = (258, 392);
T1a_cp_ul = (285, 300);
T1a_up = (155, 300);
T1a_cp_dl = (419, 470);
T1a_cp_ul = (285, 336);
T1a_up = (294, 345);
Ta4 = (0, 200);
ru_config = {
iq_width = 9;