Add 7.2 container dockerfiles and update existing images

- Add dedicated target docker files for 7.2, both RHEL and Ubuntu - in existing dockerfiles, update to also build E2 SMs - for UBI images, only the entitlements are necessary, the rest can be omitted (it is superfluous) Signed-off-by: arora <sagar.arora@eurecom.fr> Co-authored-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>
2024-07-13 14:12:01 +02:00
parent e1885f65d8
commit ccddddc64e
6 changed files with 429 additions and 8 deletions
@@ -21,12 +21,13 @@
 #---------------------------------------------------------------------
 #
 # Dockerfile for the Open-Air-Interface BUILD service
-#   Valid for RHEL9
+#   Valid for UBI9
 #
 #---------------------------------------------------------------------


 FROM registry.access.redhat.com/ubi9/ubi:latest AS ran-base
+LABEL MAINTAINER OpenAirInterface <contact@openairinterface.org>
 ARG NEEDED_GIT_PROXY
 ENV TZ=Europe/Paris
 ENV BUILD_UHD_FROM_SOURCE=True
@@ -35,10 +36,6 @@ ENV UHD_VERSION=4.4.0.0
 # Copy the entitlements
 COPY ./etc-pki-entitlement /etc/pki/entitlement

-# Copy the subscription manager configurations
-COPY ./rhsm-conf /etc/rhsm
-COPY ./rhsm-ca /etc/rhsm/ca
-
 ENV SMDEV_CONTAINER_OFF=1
 #install developers pkg/repo
 RUN rm -f /etc/rhsm-host && \
@@ -47,11 +44,21 @@ RUN rm -f /etc/rhsm-host && \
    cat /etc/os-release && \
    dnf install -y \
       #gcc needed for build_oai
-       gcc gcc-c++ \ 
       diffutils \
       file \
       psmisc \
       git \
+       meson \
+       wget \
+       xz \
+       pkg-config \
+       pcre2-devel \
+       m4 \
+       python3-devel \
+       numactl-libs \
+       numactl-devel \
+       gcc-toolset-12-gcc \
+       gcc-toolset-12-gcc-c++ \
       # python3-pip and pyyaml are used for conf template generation
       python3-pip && \
    pip3 install --ignore-installed pyyaml && \
@@ -80,8 +87,9 @@ WORKDIR /oai-ran
 COPY oaienv .

 #run build_oai -I to get the builder image
-RUN /bin/sh oaienv && \ 
+RUN /bin/sh oaienv && \
    cd cmake_targets && \
    mkdir -p log && \
-    ./build_oai -I --install-optional-packages -w USRP && \
+    scl enable gcc-toolset-12 "\
+    ./build_oai -I --install-optional-packages -w USRP" && \
    rm /etc/pki/entitlement/*pem
@@ -45,6 +45,11 @@ RUN apt-get update && \
       gcc-12 \
       g++-12 \
       xxd \
+       libpcre2-dev \
+       python3-dev \
+       bison \
+       flex \
+       m4 \
       # python3-pip for conf template generation
       python3-pip && \
    update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-12 100 --slave /usr/bin/g++ g++ /usr/bin/g++-12 && \
@@ -0,0 +1,79 @@
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+#
+# Dockerfile for the Open-Air-Interface RAN Build for FHI 7.2
+#               Valid for UBI9
+#
+#---------------------------------------------------------------------
+
+FROM ran-base:latest as ran-base
+ENV TZ=Europe
+
+RUN rm -Rf /oai-ran
+WORKDIR /oai-ran
+COPY . .
+
+## Download and build DPDK
+RUN wget http://fast.dpdk.org/rel/dpdk-20.11.9.tar.xz && \
+    tar -xvf dpdk-20.11.9.tar.xz && \
+    cd dpdk-stable-20.11.9 && \
+    meson build && \
+    ninja -C build && \
+    ninja install -C build
+
+## Build Fronthaul library
+RUN git clone https://gerrit.o-ran-sc.org/r/o-du/phy.git /opt/phy && \
+    cd /opt/phy && \
+    git checkout oran_e_maintenance_release_v1.0 &&\
+    git apply /oai-ran/cmake_targets/tools/oran_fhi_integration_patches/E/oaioran_E.patch && \
+    cd /opt/phy/fhi_lib/lib && \
+    RTE_SDK=/oai-ran/dpdk-stable-20.11.9/ XRAN_DIR=/opt/phy/fhi_lib make XRAN_LIB_SO=1 
+
+FROM ran-base as ran-build-fhi72
+ARG E2AP_VERSION=E2AP_V3
+ARG KPM_VERSION=KPM_V3_00
+
+## Build and install OAI
+RUN /bin/sh oaienv && \ 
+    cd cmake_targets && \
+    mkdir -p log && \
+    scl enable gcc-toolset-12 "\
+    ./build_oai \
+      --gNB \
+      --build-lib 'telnetsrv enbscope uescope nrscope' \
+      -t oran_fhlib_5g --cmake-opt -Dxran_LOCATION=/opt/phy/fhi_lib/lib \
+      --build-e2 --cmake-opt -DXAPP_MULTILANGUAGE=OFF --cmake-opt -DKPM_VERSION=$KPM_VERSION --cmake-opt -DE2AP_VERSION=$E2AP_VERSION" &&\
+    # Mainly to see if the sanitize option was perfectly executed
+    ldd ran_build/build/nr-softmodem && \
+    ldd ran_build/build/liboran_fhlib_5g.so && \
+    ldd /opt/phy/fhi_lib/lib/build/libxran.so
+
+## Build FlexRIC for SM Models
+RUN mkdir -p openair2/E2AP/flexric/build && \
+    cd openair2/E2AP/flexric/build && \
+    scl enable gcc-toolset-12 "\
+    cmake -GNinja -DCMAKE_BUILD_TYPE=Release \
+          -DXAPP_MULTILANGUAGE=OFF \
+          -DKPM_VERSION=$KPM_VERSION \
+          -DE2AP_VERSION=$E2AP_VERSION .. &&\
+    ninja && \
+    ninja install"
@@ -0,0 +1,91 @@
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+#
+# Dockerfile for the Open-Air-Interface RAN Build for FHI 7.2
+#               Valid for UBUNTU 22.04
+#
+#---------------------------------------------------------------------
+
+FROM ran-base:latest as ran-base
+
+ARG E2AP_VERSION=E2AP_V3
+ARG KPM_VERSION=KPM_V3_00
+ENV DEBIAN_FRONTEND=noninteractive
+ENV TZ=Europe
+RUN apt-get update && \
+    DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
+    DEBIAN_FRONTEND=noninteractive apt-get install --yes \
+        meson \
+        wget \
+        xz-utils \
+        pkg-config \
+        libnuma-dev && \
+    rm -rf /var/lib/apt/lists/*
+
+RUN rm -Rf /oai-ran
+WORKDIR /oai-ran
+COPY . .
+
+## Download and build DPDK
+RUN wget http://fast.dpdk.org/rel/dpdk-20.11.9.tar.xz && \
+    tar -xvf dpdk-20.11.9.tar.xz && \
+    cd dpdk-stable-20.11.9 && \
+    meson build && \
+    ninja -C build && \
+    ninja install -C build
+
+## Build Fronthaul library
+RUN git clone https://gerrit.o-ran-sc.org/r/o-du/phy.git /opt/phy && \
+    cd /opt/phy && \
+    git checkout oran_e_maintenance_release_v1.0 &&\
+    git apply /oai-ran/cmake_targets/tools/oran_fhi_integration_patches/E/oaioran_E.patch && \
+    cd /opt/phy/fhi_lib/lib && \
+    RTE_SDK=/oai-ran/dpdk-stable-20.11.9/ XRAN_DIR=/opt/phy/fhi_lib make XRAN_LIB_SO=1 
+
+FROM ran-base as ran-build-fhi72
+## Build and install OAI
+#run build_oai to build the target image
+RUN /bin/sh oaienv && \ 
+    cd cmake_targets && \
+    mkdir -p log && \
+    ./build_oai \
+      --gNB \
+      --build-lib "telnetsrv enbscope uescope nrscope" \
+      -t oran_fhlib_5g --cmake-opt -Dxran_LOCATION=/opt/phy/fhi_lib/lib \
+      --build-e2 --cmake-opt -DXAPP_MULTILANGUAGE=OFF --cmake-opt -DKPM_VERSION=$KPM_VERSION --cmake-opt -DE2AP_VERSION=$E2AP_VERSION && \
+      $BUILD_OPTION && \
+    # Mainly to see if the sanitize option was perfectly executed
+    ldd ran_build/build/nr-softmodem && \
+    ldd ran_build/build/liboran_fhlib_5g.so && \
+    ldd /opt/phy/fhi_lib/lib/build/libxran.so
+
+## Build FlexRIC for SM Models
+RUN mkdir -p openair2/E2AP/flexric/build && \
+    cd openair2/E2AP/flexric/build && \
+    cmake -GNinja -DCMAKE_BUILD_TYPE=Release \
+          -DXAPP_MULTILANGUAGE=OFF \
+          -DKPM_VERSION=$KPM_VERSION \
+          -DE2AP_VERSION=$E2AP_VERSION \
+          -DCMAKE_C_COMPILER=gcc-12 \
+          -DCMAKE_CXX_COMPILER=g++-12 .. && \
+    ninja && \
+    ninja install
@@ -0,0 +1,125 @@
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+#
+# Dockerfile for the Open-Air-Interface 7.2 Fronthaul 
+#      Valid for UBI9
+#
+#---------------------------------------------------------------------
+
+FROM ran-base:latest as gnb-base
+
+FROM ran-build-fhi72:latest as gnb-build
+
+#start from scratch for target executable
+FROM registry.access.redhat.com/ubi9/ubi:latest as oai-gnb-fhi72
+ENV TZ=Europe/Paris
+
+# Copy the entitlements
+COPY ./etc-pki-entitlement /etc/pki/entitlement
+
+RUN rm -f /etc/rhsm-host && \
+    subscription-manager repos --enable codeready-builder-for-rhel-9-x86_64-rpms && \
+    dnf update -y && \
+    cat /etc/os-release && \
+    dnf install -y \
+        procps-ng \
+        libXpm \
+        libX11 \
+        lksctp-tools \
+        xz \
+        numactl-libs \
+        numactl-devel \
+        pkg-config \
+        pciutils \
+        tzdata \
+        gdb \
+        python3 \
+        python3-pip \
+        net-tools \
+        iputils && \
+    pip3 install six && \
+    pip3 install requests && \
+    echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
+    echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf && \
+    subscription-manager repos --disable codeready-builder-for-rhel-9-x86_64-rpms && \
+    rm -rf /etc/pki/entitlement
+
+WORKDIR /opt/oai-gnb/bin
+COPY --from=gnb-build \
+    /oai-ran/cmake_targets/ran_build/build/nr-softmodem ./
+COPY ./docker/scripts/gnb_entrypoint.sh ./entrypoint.sh
+
+COPY --from=gnb-build \
+    /oai-ran/cmake_targets/ran_build/build/librfsimulator.so \
+    /oai-ran/cmake_targets/ran_build/build/liboran_fhlib_5g.so \
+    /oai-ran/cmake_targets/ran_build/build/liboai_transpro.so \
+    /oai-ran/cmake_targets/ran_build/build/libcoding.so \
+    /oai-ran/cmake_targets/ran_build/build/libparams_libconfig.so \
+    /oai-ran/cmake_targets/ran_build/build/libdfts.so \
+    /oai-ran/cmake_targets/ran_build/build/libldpc*.so \
+    /oai-ran/cmake_targets/ran_build/build/libtelnetsrv.so \
+    /oai-ran/cmake_targets/ran_build/build/libtelnetsrv_ci.so \
+    /usr/local/lib/
+
+## Libxran library
+COPY --from=gnb-build \
+    /opt/phy/fhi_lib/lib/build/libxran.so \
+    /opt/phy/fhi_lib/lib/build/
+
+## Copy all DPDK libraries as liboran_fhlib_5g.so require most of them
+COPY --from=gnb-build /usr/local/lib64/ /usr/local/lib64/
+
+## Copy E2 SM models
+COPY --from=gnb-build /usr/local/lib64/flexric /usr/local/lib64/flexric
+
+# Copying file for configuration module
+COPY --from=gnb-base \
+    /lib64/libconfig.so.11 \
+    /lib64/libforms.so.2 \
+    /lib64/libblas.so.3 \
+    /lib64/libcblas.so.3 \
+    /lib64/liblapack.so.3 \
+    /lib64/liblapacke.so.3 \
+    /lib64/libicudata.so.67 \
+    /lib64/libicui18n.so.67 \
+    /lib64/libicuuc.so.67 \
+    /lib64/
+
+RUN ldconfig && \
+    echo "---- ldd on executable nr-softmodem ----" && \
+    ldd /opt/oai-gnb/bin/nr-softmodem && \
+    echo "---- ldd on shared libraries ----" && \
+    ldd /usr/local/lib/librfsimulator.so \
+        /usr/local/lib/liboran_fhlib_5g.so \
+        /usr/local/lib/liboai_transpro.so \
+        /usr/local/lib/libcoding.so \
+        /usr/local/lib/libparams_libconfig.so \
+        /usr/local/lib/libdfts.so \
+        /usr/local/lib/libldpc*.so \
+        /usr/local/lib/libtelnetsrv.so \
+        /usr/local/lib/libtelnetsrv_ci.so \
+        /opt/phy/fhi_lib/lib/build/libxran.so
+
+WORKDIR /opt/oai-gnb
+COPY --from=gnb-base /tini /tini
+ENTRYPOINT ["/tini", "-v", "--", "/opt/oai-gnb/bin/entrypoint.sh"]
+CMD ["/opt/oai-gnb/bin/nr-softmodem", "-O", "/opt/oai-gnb/etc/gnb.conf"]
@@ -0,0 +1,113 @@
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+#
+# Dockerfile for the Open-Air-Interface 7.2 Fronthaul 
+#      Valid for Ubuntu22.04
+#
+#---------------------------------------------------------------------
+
+FROM ran-base:latest as gnb-base
+
+FROM ran-build-fhi72:latest as gnb-build
+
+
+#start from scratch for target executable
+FROM ubuntu:jammy as oai-gnb
+ARG BUILD_OPTION
+ENV DEBIAN_FRONTEND=noninteractive
+ENV TZ=Europe
+
+RUN apt-get update && \
+    DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
+    DEBIAN_FRONTEND=noninteractive apt-get install --yes \
+        software-properties-common \
+        procps \
+        pkg-config \
+        libsctp1 \
+        tzdata \
+        libblas3 \
+        libconfig9 \
+        openssl \
+        net-tools \
+        iperf \
+        iproute2 \
+        iputils-ping \
+        gdb \
+        pciutils \
+        libpcap-dev \
+        xz-utils \ 
+        libnuma-dev \
+        python3 \
+        python3-six \
+        python3-requests &&\
+# if the --sanitize option was used to build, additional packages are required
+    /bin/bash -c 'if [[ "$BUILD_OPTION" = "--sanitize" ]]; then DEBIAN_FRONTEND=noninteractive apt-get install --yes \
+        libasan5 \
+        libubsan1 \
+        liblapacke; fi' && \
+    rm -rf /var/lib/apt/lists/*
+
+WORKDIR /opt/oai-gnb/bin
+COPY --from=gnb-build \
+    /oai-ran/cmake_targets/ran_build/build/nr-softmodem ./
+COPY ./docker/scripts/gnb_entrypoint.sh ./entrypoint.sh
+
+COPY --from=gnb-build \
+    /oai-ran/cmake_targets/ran_build/build/librfsimulator.so \
+    /oai-ran/cmake_targets/ran_build/build/liboai_transpro.so \
+    /oai-ran/cmake_targets/ran_build/build/libcoding.so \
+    /oai-ran/cmake_targets/ran_build/build/libparams_libconfig.so \
+    /oai-ran/cmake_targets/ran_build/build/libdfts.so \
+    /oai-ran/cmake_targets/ran_build/build/libldpc*.so \
+    /oai-ran/cmake_targets/ran_build/build/libtelnetsrv.so \
+    /oai-ran/cmake_targets/ran_build/build/libtelnetsrv_ci.so \
+    /usr/local/lib/
+
+## Libxran library
+COPY --from=gnb-build \
+    /opt/phy/fhi_lib/lib/build/libxran.so \
+    /opt/phy/fhi_lib/lib/build/
+
+## Copy all DPDK libraries as liboran_fhlib_5g.so require most of them
+COPY --from=gnb-build /usr/local/lib/x86_64-linux-gnu /usr/local/lib/x86_64-linux-gnu/
+
+## Copy E2 SM models
+COPY --from=gnb-build /usr/local/lib/flexric /usr/local/lib/flexric
+
+RUN ldconfig && \
+    echo "---- ldd on nr-softmodem ----" && \
+    ldd /opt/oai-gnb/bin/nr-softmodem && \
+    echo "---- ldd on shared libraries ----" && \
+    ldd /usr/local/lib/librfsimulator.so \
+        /usr/local/lib/liboai_transpro.so \
+        /usr/local/lib/libcoding.so \
+        /usr/local/lib/libparams_libconfig.so \
+        /usr/local/lib/libdfts.so \
+        /usr/local/lib/libldpc*.so \
+        /usr/local/lib/libtelnetsrv.so \
+        /usr/local/lib/libtelnetsrv_ci.so \
+        /opt/phy/fhi_lib/lib/build/libxran.so
+
+WORKDIR /opt/oai-gnb
+COPY --from=gnb-base /tini /tini
+ENTRYPOINT ["/tini", "-v", "--", "/opt/oai-gnb/bin/entrypoint.sh"]
+CMD ["/opt/oai-gnb/bin/nr-softmodem", "-O", "/opt/oai-gnb/etc/gnb.conf"]