removed pre-compiled exmimo files as they don't work for different kernel versions

2015-12-19 16:42:38 +01:00
parent 5f7e99760e
commit d3eebd0666
10 changed files with 0 additions and 89 deletions
@@ -1,4 +0,0 @@
-n=oarf_get_num_detected_cards;
-for i=n-1:0
-	oarf_stop(i);
-end
@@ -1,85 +0,0 @@
-#!/bin/bash
-
-################################################################################
-#   OpenAirInterface
-#   Copyright(c) 1999 - 2015 Eurecom
-#
-#    OpenAirInterface is free software: you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License as published by
-#    the Free Software Foundation, either version 3 of the License, or
-#    (at your option) any later version.
-#
-#
-#    OpenAirInterface is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with OpenAirInterface.The full GNU General Public License is
-#    included in this distribution in the file called "COPYING". If not,
-#    see <http://www.gnu.org/licenses/>.
-#
-#  Contact Information
-#  OpenAirInterface Admin: openair_admin@eurecom.fr
-#  OpenAirInterface Tech : openair_tech@eurecom.fr
-#  OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
-#
-#  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
-#
-################################################################################
-# file init_nas_nos1
-# brief loads the nasmesh module and sets up the radio bearers (used to provide ip interface without S1 interface)
-# author Florian Kaltenberger
-#
-#######################################
-
-load_module() 
-{
-  mod_name=${1##*/}
-  mod_name=${mod_name%.*}
-  if awk "/$mod_name/ {found=1 ;exit} END {if (found!=1) exit 1}" /proc/modules
-    then
-      echo "module $mod_name already loaded: I remove it first"
-      sudo rmmod $mod_name
-  fi
-  echo loading $mod_name
-  sudo insmod $1
-}
-
-
-function main() 
-{
-PCI=`lspci -m | grep Xilinx`
-if [ -z "$PCI" ]; then
- echo "No card found. Stopping!"
- return
-fi
-
-## This part corrects the wrong configuration of the endpoint done by the bios in some machines
-echo "$PCI" | while read config_reg; do
-SLOT_NUMBER=`echo $config_reg | awk -F\" '{print $1}'`
-sudo setpci -s $SLOT_NUMBER 60.b=10
-done
-
-
-load_module $OPENAIR_DIR/targets/bin/openair_rf.ko
-sleep 1
-
-if [ ! -e /dev/openair0 ]; then 
- sudo mknod /dev/openair0 c 127 0
- sudo chmod a+rw /dev/openair0
-fi
-
-DEVICE=`echo $PCI | awk -F\" '{print $(NF-1)}' | awk '{print $2}'`
-DEVICE_SWID=${DEVICE:2:2}
-if [ $DEVICE_SWID == '0a' ]; then
-   echo "Using firware version 10"
-   $OPENAIR_DIR/targets/bin/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10
-else
-   echo 'No corresponding firmware found'
-   return
-fi
-}
-
-main "$@"