maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Updating conf files. DL messages from gNB working.

Browse Source 
NR UE is ending early. LTE is not passing at all.
X2 interface is not working either.
This commit is contained in:
Melissa Elkadi
2021-04-30 11:03:30 -07:00
parent 2c40332482
commit f434a8ded9
4 changed files with 54 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files
ci-scripts/conf_files/nr-ue.nfapi.conf
+44
View File
@@ -0,0 +1,44 @@
log_config = {
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="medium";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="full";
};
L1s = (
{
num_cc = 1;
tr_n_preference = "nfapi";
local_n_if_name = "lo:";
remote_n_address = "127.0.0.2";
local_n_address = "127.0.0.1";
local_n_portc = 50600;
remote_n_portc = 50601;
local_n_portd = 50610;
remote_n_portd = 50611;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 90
att_rx = 0;
bands = [7,38,42,43];
max_pdschReferenceSignalPower = -27;
max_rxgain = 125;
}
);
ci-scripts/conf_files/rcc.band7.tm1.nfapi.conf
+6 -6
View File
@@ -183,7 +183,7 @@ eNBs =
enable_measurement_reports = "no";
///X2
enable_x2 = "no";
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
@@ -191,12 +191,12 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "ens3";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "ens3";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.1";
ENB_INTERFACE_NAME_FOR_S1U = "lo";
ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.1";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_IPV4_ADDRESS_FOR_X2C = "127.0.0.1";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
common/utils/LOG/log.h
+1 -1
View File
@@ -416,7 +416,7 @@ int32_t write_file_matlab(const char *fname, const char *vname, void *data, int
// debugging macros
#define LOG_F LOG_I /* because LOG_F was originaly to dump a message or buffer but is also used as a regular level...., to dump use LOG_DUMPMSG */
#define LOG_MINIMAL 0 /* 1 for minimal logging: E, W and A */
#define LOG_MINIMAL 1 /* 1 for minimal logging: E, W and A */
#if LOG_MINIMAL
targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band78.tm1.106PRB.nfapi.conf
+3 -3
View File
@@ -232,7 +232,7 @@ gNBs =
}
);
///X2
enable_x2 = "no";
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
@@ -248,9 +248,9 @@ gNBs =
{ # All of these have to be IP addr of gNB
# if in CORE container, make it 172.16.0.X
# if not launched in CORE, can set to lo (127.0.0.2)
GNB_INTERFACE_NAME_FOR_S1_MME = "lo";
GNB_INTERFACE_NAME_FOR_S1_MME = "lo:";
GNB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.2";
GNB_INTERFACE_NAME_FOR_S1U = "lo";
GNB_INTERFACE_NAME_FOR_S1U = "lo:";
GNB_IPV4_ADDRESS_FOR_S1U = "127.0.0.2";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
GNB_IPV4_ADDRESS_FOR_X2C = "127.0.0.2";