Update vrtsim timing job thread
List of changes:
- avoid calculating accumulated rounding error by calculating absolute
sample index based on CLOCK_REALTIME every time.
- use threadCreate instead of plain pthread_create which assigns a unique
thread name and simplifies debugging
Fix two issues regarding vrtsims taps client implementation:
- Incorrect #define used to enable taps socket handling
- flatbuffers package name changing between ubuntu versions
Support beam index for LiteON FR2 RU that needs per symbol section in CP packets
This branch supports beam index for LiteOn FR2 RU and others. It adds
the support of beam index for LiteOn RU that uses per-symbol CP packet
and is a sequel of MR !3605 (merged) that supports beam index for RU
that uses per-slot CP packets.
A. To support LiteOn FR2 RU, the following are needed.
a. Per symbol beamforming. Need separate section for each symbol on CP packet.
b. Handle these two bugs:
- section ID on UP packet is set wrongly to 13 for all sections
- prach eAxC offset starts from 0 instead of from last antenna port
number used by other channels.
B. Implementation
a. set fh_config->RunSlotPrbMapBySymbolEnable based on the setting in the configuration file
- if disable, the existing per-slot scheme is run on xran.
- if enable, RunSlotPrbMapBySymbolEnable mode is on in xran so that xran
will generate PrbElm per symbol (aka total of 14)and perform
per-symbol processing on the corresponding PrbElm.
b. set fh_config->LiteOnIgnoreUPSectionIdEnable based on the setting in
the configuration file if enable, handle 2 "features" of Liteon:
- To handle the section_id = 13 issue on Liteon where section ID is set
wrongly to 13 for all sections
- To handle the prach eAxC offset issue on Liteon where it starts from 0
instead of from the end of last antenna port number
c. if fh_config->RunSlotPrbMapBySymbolEnable, OAI FHI
- invoke xran_fh_rx_read_slot_BySymbol() instead of xran_fh_rx_read_slot()
- invoke xran_fh_tx_send_slot_BySymbol() instead of xran_fh_tx_send_slot()
C. Testing
a. Command to test benetel RU
sudo LD_LIBRARY_PATH=.:$DPDK_INST/lib/x86_64-linux-gnu/ ./nr-softmodem -O /etc/ran_development/CONFs/gnb.sa.band77.273prb.fhi72.4x4-benetel550_c0.conf --thread-pool 21,22,23,24,25,26,27,28
Results:
iperf UDP uplink
[ 5] 0.00-10.22 sec 87.3 MBytes 71.6 Mbits/sec 0.100 ms 370/63081 (0.59%) receiver
iperf UDP downlink
[ 5] 0.00-10.00 sec 796 MBytes 668 Mbits/sec 0.017 ms 1824/586404 (0.31%) receiver
b. Command to test LiteOn FR2 RU
sudo LD_LIBRARY_PATH=.:$DPDK_INST/lib/x86_64-linux-gnu/ ./nr-softmodem -O /etc/ran_development/CONFs/gnb.sa.band78.66prb.fhi72.2x2-liteon-F-Release.conf--thread-pool 21,22,23,24,25,26,27,28
Result:
iperf UDP uplink
[ 5] 0.00-10.20 sec 89.9 MBytes 73.9 Mbits/sec 0.156 ms 212/64848 (0.33%) receiver
iperf UDP downlink
[ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec 0.077 ms 277662/542891 (51%) receiver
D. Difference between LiteOn FR2 E release configuration file and that for F release is
diff gnb.sa.band78.66prb.fhi72.2x2-liteon-KB.conf gnb.sa.band78.66prb.fhi72.2x2-liteon-F-Release.conf 39d38
< beam_weights = [1, 1];
225a225
> beam_weights = [1];
312c312,313
< mtu = 1500; # check if xran uses this properly
---
> #mtu = 1500; # check if xran uses this properly
> mtu = 9000; # check if xran uses this properly
313a315,316
> RunSlotPrbMapBySymbol = 1;
> LiteOnIgnoreUPSectionId = 1;
Add the F patch that work on both Benetel and LiteOn RU. support
fh_config parameters RunSlotPrbMapBySymbol and LiteOnIgnoreUPSectionId.
Change version number.
Make gpd config utility global
Make gpd a global utility macro for reading config/command line
parameters. Add a corresponding function with full name for clarity,
keep the short name for the macro for backward compatibility and ease of
use.
The main benefit of gpd/config_get_paramdef_from_name macro/function is
that it does not require maintaining a separate parameter index list.
List of changes:
- avoid calculating accumulated rounding error by calculating absolute
sample index based on CLOCK_REALTIME every time.
- use threadCreate instead of plain pthread_create which assigns a unique
thread name and simplifies debugging
Make gpd a global utility macro for reading config/command line parameters.
Add a corresponding function with full name for clarity, keep the short name
for the macro for backward compatibility and ease of use.
The main benefit of gpd/config_get_paramdef_from_name macro/function is that
it does not require maintaining a separate parameter index list.
Support prach with start symbol of PRACH not at symbol 0
The following PRACH indice have been tested.
index / format (nf mod x = y) / Subframe/ start_symbol /no_of_slot / occ / duration
152 B4 2 1 4,9 0 2 1 12
151 B4 2 1 4,9 2 1 1 12
157 B4 1 0 4 0 1 1 12
159 B4 1 0 9 0 1 1 12
Rfsimulator beam reception/transmission
A simplified beam switching simulation for rfsimulator. This works
mainly in 1 gNB - N UEs scenarios. This is not a real beamformer with
antenna, channel and propagation model. The way it works is that the
peers inform each other about the beams they transmit in, and on
reception before channel modelling, the beam data is combined based on
preconfigured rx_beam/tx_beam gain matrix.
Usage:
- Add --rfsimulator.enable_beams to enable beam simulation
- Add --rfsimulator.beam_gains .
Example list: 0,-5,-10
Resulting matrix:
[[0, -5, -10] [-5, 0, -5]] [-10, -5, 0]]
- Add --telnetsrv if you want to control the beams manually. The command
in telnet is "rfsimu setbeam <beam_map>", where beam_map is a uint64_t
controling the reception beam and transmission beam. If the
application is switching the beams automatically the beams will be
overwritten as soon as the application chooses to switch beams.
Supports up to 64 concurrent TX and RX beams.
Add CLI parameter rfsimulator.beam_ids which uses a list of beam ids instead of a
beam map. The beam map API is still present and can be used interchangably.
Add telnet command setbeamids which has similar semantics
Allow arbitrary order of beam ids in set_beams2 function. This
allows the application to select any arbitrary order of beam ids.
The underlying transport mechanism still uses beam_map so the beam_ids
are ordered before sending.
Also replaced tx_beam_map/rx_beam_map into beam_map.
Also fixed an issue where --rfsimulator.enable_beams required an argument.
- Added first beam optimization to combine_tx_buffers.
- Added first beam & first peer optimization to rfsimulator_read_internal
This results in significant speed up for the first rx beam, first tx
beam and first peer which is the base case with beam simulation disabled.
In rfsim, received packets are dynamically allocated and freed when no longer
needed, which is dependent on the channel model, packet timestamp and packet
size (number of samples carried).
This commit fixes the packet age check for channels with nonzero channel offset
(most notalby NTN channels).
Also present:
- extract the NTN satellite position update code to a separate function and
call it once per trx_read call instead of once per rx beam.
Add a set of macros with designated initializers to simplify using
paramdef_t arrays in C++ source code. Fix clang error with
RFSIMULATOR_PARAMS_DESC using mixed designated and non-designated
initializers.
- Received packets are dynamically allocated and kept in a
queue for as long as they are needed.
- The layout of the packets was changed from interleaved antennas
to non-interleaved antennas.
- Generate a contiguous buffer from saved packets as needed.
There is extra work caused by this change due to recv() call no
longer saving data directly into the circular buffer, however further
processing is easier due to contiguous nature of the tx antenna buffers
prepared. The impact on performance was not measured.
A simplified beam switching simulation for rfsimulator. This works
mainly in 1 gNB - N UEs scenarios. This is not a real beamformer with
antenna, channel and propagation model. The way it works is that the
peers inform each other about the beams they transmit in, and on
reception before channel modelling, the beam data is combined based on
preconfigured rx_beam/tx_beam gain matrix.
Usage:
- Add --rfsimulator.enable_beams to enable beam simulation
- Add --rfsimulator.beam_gains <comma separated Toepliz form matrix of gains in dB>.
Example list: 0,-5,-10
Resulting matrix:
[[0, -5, -10]
[-5, 0, -5]]
[-10, -5, 0]]
- Add --telnetsrv if you want to control the beams manually. The command in telnet
is "rfsimu setbeam <beam_map>", where beam_map is a uint64_t controling the
reception beam and transmission beam. If the application is switching the beams
automatically the beams will be overwritten as soon as the application chooses to
switch beams.
Co-authored-by: Laurent Thomas <laurent.thomas@open-cells.com>
[FHI72] Fix the PRACH FFT size
ru_config->fftSize is used for the C-plane Section Type 3 which is
dedicated for PRACH and mixed numerology. Previously, we assumed that
PRACH FFT size is equivalent to PxSCH FFT size, but should be based on
the PRACH format.
Tests with the following RUs:
- [x] Benetel v1.2.2 & v1.4.1
- [x] VVDN Gen 3
- [x] Liteon 02.00.10
- [x] Metanoia v2.2.8 (Jura)
This function is to be called by the application to switch beams
on reception and transmission. When receiving new samples using
trx_read/trx_write the application is expected to be able to
determine which beam the samples belong to.
Thomas Schlichter