1.Create new funtion nr_symbol_fep() to do OFDM demod of one symbol on
all antennas. This is called by nr_slot_fep() for now. In the
upcoming MR, this function will be called directly after reading
each OFDM symbol from the radio.
2.Removed redundant memory alignment. DFT function performs memory
alignment if the input memory is not aligned.
Alignment of temporary IDFT buffer was changed to 64 bytes. This is in preparation
for possible use of different IDFT implementation which could use AVX-512, requiring
64-byte alignment.
It seems that the cyclic prefix is in most cases a multiple of 512 samples.
This means that in most cases the idft output pointer is already aligned and
there is no need to perform an extra memcpy. This saves the memcpy time in
most cyclic prefix insertion cases.
Simplify logs in gNB&UE
- reduce the amount of printf() that outputs useless info
- in MAC, PHY, NGAP, RRC, mark some "important" UE events with LOG_A for
better visibility -> can put log_config.global_log_level analysis to
only see important stuff
- in RRC, use some macro to consistently print logs
- track the cellID of a UE in RRC
This commit removes many logs that just show memory addresses, indices,
etc., which, I presume, do not mean anything to the "average user" and
developers alike.
It is better to write to memory that are grouped together to reduce
probability of cache miss. This simple change improved the function's
execution speed by 70%.
Removed the unnecessary memset for the buffer.
- Phy config update and Sidelink frame parameters initialisation
- PSBCH scheduler to trigger TX PSBCH/RX PSBCH actions
- Sidelink indication with rx ind to trigger send SL-MIB to MAC
- Enable Scope for PSBCH use -d or --dqt
- Enable system testing of PSBCH for example using RFSIMULATOR:
- UE1 is a SYNCRONISATION SOURCE UE which transmits PSBCH
started using command -
sudo ./nr-uesoftmodem --sl-mode 2 --sync-ref 4 --rfsim --rfsimulator.serveraddr server
- UE2 syncs onto UE1 during sidelink search, gets the timing and continues to receive PSBCH
started using command -
sudo ./nr-uesoftmodem --sl-mode 2 --rfsim --rfsimulator.serveraddr 127.0.0.1
- In the default use case 2 Sidelink SSBs sent over 16 frames.
- In case SL-SSB configuration needs to be changed use -O option in the above command like
-O ../../../targets/PROJECTS/NR-SIDELINK/CONF/sidelink_preconfig_1txpool.conf
Till this commit, the UE gets the position of SSB in frequency from
command line and does the syncronization by locating the SSB in time. It
does this by generating a PSS time signal during initialization with the
SSB offset given via command line. Then PSS detection is done by
correlation.
In this commit, the UE computes a list of GSCN in the current NR band
that falls within the current bandwidth for the set center frequency.
For each GSCN in the list, the UE starts a thread and performs the
following:
1. Generate PSS time signal with SSB offset for current GSCN.
2. Detect PSS, SSS and decode PBCH (this step remains the same).
After all threads finishes, the results are collected.
For now, only the first detected PBCH is used to proceed further. So
this PBCH is indicated to MAC and UE exits initial sync.
Future work: The cell search can be standalone feature where the UE
could scan for SSB in the entire NR band. This would require changing
radio's frequency on the fly as the UE's bandwidth would not cover an
entire NR band. The cell detection can futher be imporved by looking
for SIB1 for each decoded PBCH.
Sakthivel Velumani