MeasTimingConfig may not come with F1 Setup Request: some DUs send it
with the DU configuration update. Handle this gracefully by checking for
MTC before using it.
Reset all the circular buffer to zero; this ensures that we cannot read
uninitialized data. Since this is RFsimulator, performance is not a
problem here either (and zeroing out happens only once).
Memsan complains that uninitialized reads originate because of these
warnings. Most of the corresponding variables are actually read into
through by libconfig; nevertheless, initializing them should not have a
bad side-effect (because the initialized value is overwritten).
We access G_N at indexes that are not necessarily 32-byte aligned,
leading to segfaults. Use simde_mm256_loadu_si256() to load from memory
at an unaligned memory address to avoid the segfault.
Discovered using clang; it is unclear why gcc did not encounter the same
segfault.
-rdynamic is necessary for clang as well to properly link shared
executables. Add furthermore an option to ignore unused command line
arguments, to suppress warning
clang: warning: argument unused during compilation: '-rdynamic' [-Wunused-command-line-argument]
This is likely because -rdynamic is only relevant for the linker, but
the corresponding option add_link_options() is only available starting
cmake 3.13, while we are still at 3.12 (for Ubuntu 18, to my
understanding).
Unlike the previous commit, in noS1, we cannot use Attach(), as noS1
automatically brings up an interface, no matter whether the connection
succeeded or not. Therefore, consistently wait a bit longer to increase
the chance that the radio is really up.
For various reasons, the UE might take longer to connect to the eNB. A
simple sleep might not be enough; instead, use Attach() to actively wait
that the UE gets an IP address. The added bonus of this function is that
it will also stop&restart a UE if it did not attach, i.e., it will try
multiple times to attach the UE.
The code (author) confused MCE_PARAMS_DESC and MCE_NETPARAMS_DESC and
tried to read the MCE name from MCE_NETPARAMS_DESC when in reality it
should come from MCE_PARAMS_DESC. This commit fixes to use the right
array.
In a previous commit, the functionality of handling IPv6 (and DNS names)
as part of the IPv4 was introduced (in IPv4 field for backwards
compatibility). This commit now removes superfluous configuration
fields:
- IPv6: handled by IPv4 field
- active: users can just remove an entry
- preference: not needed
Rewrite sctp_create_new_listener() to use getaddrinfo() to look up
IPv4/IPv6 addresses via a common interface. This allows to use e.g. DNS,
and enables the SCTP library to listen on IPv6 ports.
To support the above, the corresponding message is changed to not take
an IPv4 address on 4 bytes (and separate IPv6), but a single name that
will be resolved via getaddrinfo()
The previous init message used to allow multiple IPv4/IPv6 addresses;
since this is not used anywhere, remove the corresponding functionality.
Modify all uses of this ITTI message to copy te SCTP init bind addr into
ITTI message.
Use getaddrinfo() to look up IP (v4/v6) addresses. The old
interface of separately specifying IPv4 and IPv6 addresses is
preserved, but both fields allow to specify types of addresses, and we
will remove one field in the future.
After the last commit, it is not possible to bind on separate interfaces
for F1-C and F1-U. In other words, it is for instance not possible to
have the F1-C on one subnet on one physical interface, and F1-U on
another subnet on another physical interface. This commit introduces a
second option MACRLCs.[0].local_n_address_f1u to allow to bind F1-U on
an alternative address; if it is not specified, the interface of F1-C is
reused.
The above only works for the DU; no corresponding option exists for the
CU. For the CU, use separate CU-CP and CU-UP.
Use it in the CI.
This reverts commit 284116522b.
The problem is that (1) we don't really support multi-homing, but (2) on
some system, if the other IP addresses that the operating system
considers part of the multi-homed connection are HEARTBEAT'ed (e.g.,
docker), they answer with SCTP ABORT, which breaks the entire
connection.
In other words, force single-homing by binding. For F1-U uses, another
option will be introduced that allows to bind to a separate interface
for F1-U (separate from F1-C), if necessary.
Closes#727
Prior to this commit, it might happen that the gNB used TDA 0 (Start 0
len 13) for mixed slot, in which case the UE could not send msg3
(because a mixed slot has less than 13 symbols).
We observe these asserts while running concurrent UL traffic on many
UEs:
Assertion (crc->rnti == rx->rnti) failed!
In handle_nr_ulsch() ../../../openair2/NR_PHY_INTERFACE/NR_IF_Module.c:193
mis-match between CRC RNTI 7221 and RX RNTI 35cf
CRC and RX indication need to be pairwise for one UE, when here we have
each for different UE. However, investigation seemed to indicate that
both arrays for CRC and RX indication contained only one PDU; it seemed
the RNTI changed while writing the CRC/RX.indication messages in
nr_fill_indication().
In this patch, we change the logic to mark a ULSCH free AFTER calling
nr_fill_indication(). It is difficult to say if this makes the assertion
disappear, but preliminary tests did not exhibit the same failure
states.
Closes#773
Move decision of Msg2 allocation time instant from instance we receive
RA indication (only containing preamble time information) to actual RA
scheduler (containing current DL slot time). This has the advantage:
- if Msg2 cannot be sent, we might try in a later slot
- no timing-based problems were a RACH.indication FAPI message might
come late, we calculate a Msg2 frame/slot, but this instant has
already passed in the DL scheduler
- no assumption about slot_ahead (an L1 constant)
The previous code calculated and verified an SSB index; I am not sure
this code is correct or used. I leave the function
ssb_index_from_prach() (hence the gcc attribute), but remove any checks.
Similarly, the beam association list might be wrong. I deleted the
corresponding code.
38.473 section 8.2.3.1 says that upon F1 Setup Request, UE associated
signalling should be erased. In this commit, we trigger a release of all
UEs that were still connected to a DU when we received the SCTP
shutdown, i.e., when the DU disconnects.
- Four mounting of files, we need the absolute path. Even if the script
gets relative paths, realpath will give the absolute path
- Correctly recognize and handle gNB images with AW2S support
Integration `2024.w12`
See merge request oai/openairinterface5g!2637
* !2640 Fix UPF crash at startup after latest Docker and Ubuntu updates
* !2579 Add telnetsrv_rrc for triggering RRCRelease
* !2613 NR UE fix for procedure after T300 expiry
* !2625 Changes to support 32 UEs in the gNB.
* !2632 NR fix for initialization of gold sequences for DMRS
* !2588 fix(doc): add ptp4l service configuration file in 7.2 documentation
* !2630 Move BladeRF config to right subfolder
* !2626 On RFsimulator end, close open connections
* !2628 NR UE fix double sync
* !2634 feat(phy-test): disable CQI and RSRP errors when running in phy-test mode → review to be addressed
* !2621 CI: set memory limit for docker build cache
* !2604 NR UE BSR improvements → waiting for final changes
* !2638 NR UE data scrambling fixes
* !2602 [E2 agent] KPM & RC SMs improvements
Robert Schmidt