Add a set of macros with designated initializers to simplify using
paramdef_t arrays in C++ source code. Fix clang error with
RFSIMULATOR_PARAMS_DESC using mixed designated and non-designated
initializers.
- Received packets are dynamically allocated and kept in a
queue for as long as they are needed.
- The layout of the packets was changed from interleaved antennas
to non-interleaved antennas.
- Generate a contiguous buffer from saved packets as needed.
There is extra work caused by this change due to recv() call no
longer saving data directly into the circular buffer, however further
processing is easier due to contiguous nature of the tx antenna buffers
prepared. The impact on performance was not measured.
A simplified beam switching simulation for rfsimulator. This works
mainly in 1 gNB - N UEs scenarios. This is not a real beamformer with
antenna, channel and propagation model. The way it works is that the
peers inform each other about the beams they transmit in, and on
reception before channel modelling, the beam data is combined based on
preconfigured rx_beam/tx_beam gain matrix.
Usage:
- Add --rfsimulator.enable_beams to enable beam simulation
- Add --rfsimulator.beam_gains <comma separated Toepliz form matrix of gains in dB>.
Example list: 0,-5,-10
Resulting matrix:
[[0, -5, -10]
[-5, 0, -5]]
[-10, -5, 0]]
- Add --telnetsrv if you want to control the beams manually. The command in telnet
is "rfsimu setbeam <beam_map>", where beam_map is a uint64_t controling the
reception beam and transmission beam. If the application is switching the beams
automatically the beams will be overwritten as soon as the application chooses to
switch beams.
Co-authored-by: Laurent Thomas <laurent.thomas@open-cells.com>
This function is to be called by the application to switch beams
on reception and transmission. When receiving new samples using
trx_read/trx_write the application is expected to be able to
determine which beam the samples belong to.
Integration `2025.w50`
* !3638 NR UE: calculate TA based on SIB19 information in NTN mode, if autonomous TA is not enabled
* !3624 NR UE: improve handling of Handover procedures
* !3807 doc: Update doc for IF setup
* !3741 Update documenation for handover
* !3798 Fix for computation of PRACH occasions and association period
* !3808 Add symbol timing functions for NR_DL_FRAME_PARMS + optimization for slot timing counterparts
Closes#981
See merge request oai/openairinterface5g!3806
Add symbol timing functions for NR_DL_FRAME_PARMS + optimization for slot timing
counterparts
Add two new functions for calculation symbol timestamp and symbol duration for
NR_DL_FRAME_PARMS. Also includes an optimization focused on removing
inefficiencies related slot-related counterparts.
1. Removed function pointers for functions get_samples_per_slot(),
get_samples_slot_timestamp() and get_slot_from_timestamp() as it does
not offer any advantage. The functions are now called directly from
everywhere.
2. Optimized these functions by removing loops where ever possible.
Update documenation for handover
Update documentation for handover to include the changes that were made after
upgrading the CI handover setup (attenuator, USRPs synchronization)
NR UE: calculate TA based on SIB19 information in NTN mode, if autonomous TA is not enabled
To achieve the goal, the hyper frame number (HFN) is introduced at the NR UE
PHY, MAC and RRC layers.
Besides this, we also implemented an orbit propagation to improve the accuracy
of N_UE_TA_adj, and a fix to keep the N_TA from RAR and MAC CE.
Fixes#981
Add two new functions for calculation symbol timestamp and symbol
duration for NR_DL_FRAME_PARMS. These functions are not using
the existing indirection mechanism via function pointers as this
prevents the compiler from properly optimizing the code.
Fix FAPI WLS timing, UL counter, doc
- Fix FAPI WLS timing
- Fix periodical PNF UL throughput logs
- Update documentation to better explain how to run WLS with radio (USRP
B210)
Fixes for BWP switching
This MR fixes some issues when performing BWP switching via
reconfiguration. It also adds a CI test for BWP switching. # Please
enter a commit message to explain why this merge is necessary,
In all cases (CFRA in SA for HO, or CFRA in NSA/do-ra for access), the
UE has the full configuration already. We can therefore directly switch
to a dedicated search space, as it is already known to the UE.
... so if we want to have 1 BWP configured at any given time we need to
reconfigure BWP 1 every time. This means that since the gNB has more
than 1 BWPs (for use for different UEs), that there is a "gNB BWP ID"
(as used by the gNB), which can be any BWP ID X, and one "UE BWP ID",
which is always 1. This commit implements this distinction.
Return from triggering reconfiguration with BWP switch if BWP is the
same as before the switch, and add check to verify if BWP triggered by
switch command exists
Current FAPI slot_ahead value for WLS is too low for UL, as we see these
errors:
[NR_MAC] Unexpected ULSCH HARQ PID 14 (have 3) for RNTI 0xa68e
[NR_MAC] UE a68e expected HARQ pid 3 feedback at 586. 7, but is at 587.17 instead (HARQ feedback is in the past)
Similarly to nFAPI, scale it by mu (for mu=1 => slot_ahead=2) to give
additional time, which removes these warnings at the VNF.
Bartosz Podrygajlo