The fronthaul library ships with BFP compression for AVX512 enabled targets.
This commit adds BFP compression for Arm targets by using the ArmRAL library.
Update the xran E release patch to work for Arm targets in addition to x86 targets.
Co-authored-by: Yi-Hung Chang <Yi-Hung.Chang@eurecom.fr>
Co-authored-by: brobert <brobert@valiha.com>
Remove include of SIMDE Neon header sse_intrinsic.h to compile on ARM. Otherwise the error below is issued.
```
/usr/include/simde/arm/neon/get_lane.h:279:5: error: incompatible type for argument 1 of ‘vget_lane_f16’
279 | SIMDE_CONSTIFY_8_(vget_lane_f16, r, (HEDLEY_UNREACHABLE(), SIMDE_FLOAT16_VALUE(0.0)), lane, v);
removed the inclusion of neon.h
```
Integration: `2025.w13`
Closes#923, #924, #928, and #925
See merge request oai/openairinterface5g!3345
* !3300 Allow RSRP report handling in phy-test mode
* !3318 Improve handling of some pointers causing potential segfault
* !3321 DLSCH scheduler LOGs assertion prevention in case of HARQ disabled
* !3335 Other compilation improvements
* !3338 prevent access to NULL pointer in RELEASE_IE_FROMLIST
* !3337 Fix for wrong NSA init at UE
* !3339 fix NTN regression by correctly setting cellBarredNTN_r17 for NTN band again
* !3340 NR UE: fix nr_pbch_channel_estimation()
* !3260 Shared memory realtime radio simulation
* !3341 rfsimulator: apply deadlock detection only if more than one client is connected
* !3343 K-offset updated with configured sub carrier spacing
* !3331 Add documentation for Foxconn RU
* !3216 FHI72: Management plane support
* !3295 Fix SRS report TLV unpack
Fix SRS report TLV unpack
Changes the SRS unpacking to not expect padding to be present in the buffer when
working with Aerial, with which the report TLVs are not padded to the nearest
32-bit boundary. This issue was found when using a UE with 1 SRS port, which
causes the TLV to not have a length divisible by 4. Also adds a function to pull
X amount of bytes into a uint32_t, which is used to process the last 4 byte
block of the TLV, only pulling the bytes which are not padding. Completed the
SRS.indication dumping procedure to print out the report TLV. Changed the
SRS.indication unitary test to fill the last 4 byte block of the report TLV
appropriately according to the length ( which ensures the padding bytes are set
to 0 )
FHI72: Management plane support
At the moment, tested with Benetel 550 and 650 RUs FW v1.2.2
- support for multiple RUs
- RPCs implemented: <connect>, <subscribe>, <get>, <supervision-watchdog-reset>,
<edit-config>, <validate>, <commit>, <disconnect>
- read PTP sync status from operational datastore xml
- get vendor name, and for xran store RU MAC, MTU and IQ bitwidth and PRACH
offset, and transfer this info
- store interface name, low-level-tx/rx-endpoint names, tx/rx-carrier names,...,
from operational datastore xml
- add reference gNB/DU config files with M-plane support
- update FHI readme
Add documentation for Foxconn RU
This MR adds documentation for using the Foxconn RU with OAI, as it piques the
interest of some in the community. Note that this RU is not continuously tested
with OAI L1. Additionally, we have observed throughput degradation in OAI
versions beyond tag 2024.w30, and the issue is under investigation. For now, we
are providing documentation based on what we have tested in our lab.
K-offset updated with configured sub carrier spacing
According to 38.331 , cell specific K-OFFSET provided in SIB19 is provided in
number of slots as per 15Khz SCS Koffset before being applied, needs to be
updated to the slots according to the configured subcarrier spacing.
- Increase the maximum logging line for print done through
log_output_memory().
The reason is that we hit this line length when printing some machine
generated configuration (XML) through the M-plane. Increase to make
more of it visible.
- To limit the impact, only increase this locally in function
log_output_memory(), and statically assert that it will never be
larger than 64 kB.
In other places, we use the old limit.
- Move the definition MAX_LOG_TOTAL to log.c, because it's only used
there.
- if RU(s) are not well configured, disconnect immediately and stop the DU
- if all RUs are well configured, proceed with waiting until ready. The RU is
ready when the carriers are activated. Either the RU already has preconfigured
carriers (previous M-plane client configured), or the DU has to wait until receives
the notifications.
Ideally, we should load the yang models from the RU operational datastore, but the issues are following:
1) the yang models order is not good - dependancy models have to be loaded first
2) earlier O-RAN yang versions (e.g. v4) is not properly defined (i.e. optional parameters should not be included by default)
Added support in both cases, loading from RU with <get-schema> RPC, and loading statically from "radio/fhi_72/mplane/yang/models" folder.
Add a function pullx32 to pull x amount of bytes into uint32_t
Change the unpacking to pull only the needed bytes, and skip over the padding, when not Aerial
Change SRS.indication dumping function to also print the report TLV contents
Change SRS.indication unitary test to fill the last 4 byte block of the report TLV according to the length, with padding
Shared memory realtime radio simulation
Realtime and near-realtime RFSimulator alternative without channel modelling.
The purpose of this library is to allow realtime simulation of gNB and nrUE.
The library is loaded using --device.name vrtsim. The server side (gNB) should
also configure --vrtsim.role server and --vrtsim.timescale according to
requirements.
Limitations:
- Only 1UE-to-1gNB connection supported
Future work:
- Telnet API
- cmake version 3.12 defines libxml2 module; the default path is
/usr/share/cmake-3.<sub-version>/Modules/FindLibXml2.cmake
- OAI requires minimum cmake version 3.16
- RU IP address - to connect to RUs via netconf
- DU MAC address - for setting up the CU-planes on RU; not used in xran
- VLAN tag (*) - for setting up the CU-planes on RU; not used in xran
- DU keypair - for authentication when connecting to RU(s)
The parameters that RU-controller shall retreive from RU list of
capabilities:
- MTU
- compression
- RU MAC address
- PRACH offset (**)
(*) VLAN tag is not used in xran but an option is given in fh_config struct.
In my opinion, it is not a very suitable place, as it is needed for VFs.
Therefore, I moved it in the initialization part for M-plane purposes.
(**) PRACH offset shall be >= max(Ntx,Nrx), as per O-RAN CUS specification:
"The O-DU may decide to use same eAxC ID value to address endpoints on different O-RUs,
but eAxC ID values assigned to one O-RU must be unique within the O-RU’s endpoints of same direction."
=> however, LITEON supports flexible assignment of PRACH eAxC IDs, so
we made a workaround in the xran library to support PRACH eAxC IDs same
as PUSCH eAxC IDs.
According to 38.331 , cell specific K-OFFSET provided in SIB19 is provided in number of slots as per 15Khz SCS
Koffset before being applied, needs to be updated to the slots according to the configured subcarrier spacing.
Fix for wrong NSA init at UE
This error is shown in the UE logs as following
[RLC] Activated srb0 for UE 0
[RLC] SRB0 already exists for UE 0, do nothing
Romain Beurdouche