Especially in pf_dl()/pf_ul(), we use a first loop using
UE_iterator(), then iterate over a subset of UEs. It has happened a
couple of times that I was using variable "UE" (from the iterator), when
it should only be used in the first UE_iterator() loop.
Rewrite UE_iterator() to effectively limit the scope of the iterator
variables to the body of the UE_iterator. This should also make it
possible to reuse multiple UE_iterator()s with the same variables in
sequence.
The gNB will stop the periodical logging of UEs in MAC Info level after
a configurable number of UEs have been printed, by default 8.
Set it to 17 in some CI tests to ensure we still get all UEs for the
time being, as the CI might depend on this.
The call to snprintf() as was used is wrong: we use the return value to
advance output, but the man page says
> The functions snprintf() and vsnprintf() do not write more than size
> bytes (including the terminating null byte ('\0')). If the output was
> truncated due to this limit, then the return value is the number of
> characters (excluding the terminating null byte) which would have been
> written to the final string if enough space had been available.
> Thus, a return value of size or more means that the output was
> truncated.
Thus, output could go beyond end, and we get a stack overflow. Instead,
encapsulate the call to snprintf() checking this condition, and only
advancing output as intended, limiting to 0 if we are at the end of the
buffer. This avoids this error:
==964825==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7be799f51988 at pc 0x7fe7d66b0d39 bp 0x7be79b825ef0 sp 0x7be79b8256c0
WRITE of size 3 at 0x7be799f51988 thread T24
#0 0x7fe7d66b0d38 in vsnprintf (/lib64/libasan.so.8+0xb0d38) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
#1 0x7fe7d66b2d44 in snprintf (/lib64/libasan.so.8+0xb2d44) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
#2 0x0000008fe7c6 in dump_mac_stats /home/richie/w/refactor-dlsch/openair2/LAYER2/NR_MAC_gNB/main.c:183
#3 0x00000092071a in gNB_dlsch_ulsch_scheduler /home/richie/w/refactor-dlsch/openair2/LAYER2/NR_MAC_gNB/gNB_scheduler.c:200
#4 0x0000008f8f78 in run_scheduler_monolithic /home/richie/w/refactor-dlsch/openair2/NR_PHY_INTERFACE/NR_IF_Module.c:399
There is the (global) sched_lock that prevents concurrent access. A
dedicated UE lock does not make sense in that case. Worse, this lock
does not prevent all concurrent UE accesses (e.g., there are many loops
over UEs that are not protected), so it's also wrong.
truncate resets the file size to 0. Without this, e.g., when
disconnecting a UE, the old UE remains at the end and is not
overwritten, which is confusing.
The code only checked that Msg3 would be scheduled during UL, but in
some combinations, e.g., with DSUUU, the current slot can very well be
UL as well => we would schedule DCI in UL slot.
fix non initialized DMRS port value in case of DCI00 at UE
When transmitted PUSCH is neither scheduled by DCI format 0_1 with CRC
scrambled by C-RNTI, CS-RNTI, SP-CSI-RNTI or MCS-C-RNTI, nor
corresponding to a configured grant, the UE shall use [...] DM-RS port
0.
In UE code it was not set in case of DCI00 and that was leading to ULSCH
failures in some scenarios.
OAI UE: add shared RSRP Table 10.1.6.1-1 mapping function to helpers and adopt
it RRC UE
- Add to common/utils/nr/nr_common remove from NR_MAC_UE/nr_ue_procedures.c
- Adopt in asn1_msg.c for MeasurementReport: this solves the following possible
assert:
Assertion (enc_rval.encoded > 0) failed!
In do_nrMeasurementReport_SA() /oai-ran/openair2/RRC/NR/MESSAGES/asn1_msg.c:898
ASN1 message encoding failed (MeasResultServMOList, 18446744073709551615)!
Motivation: unify RSRP-to-index mapping across layers and fix NR RRC
MeasurementReport encoding failures due to out-of-range values by reusing the
validated mapping.
Note: NR_RSRP-Range.c constraint: /* (0..127) */
Also refactored MeasurementReport to improve the code.
- Add to common/utils/nr/nr_common remove from NR_MAC_UE/nr_ue_procedures.c
- Adopt in asn1_msg.c for MeasurementReport: this solves the following assert:
Assertion (enc_rval.encoded > 0) failed!
In do_nrMeasurementReport_SA() /oai-ran/openair2/RRC/NR/MESSAGES/asn1_msg.c:898
ASN1 message encoding failed (MeasResultServMOList, 18446744073709551615)!
Motivation: unify RSRP-to-index mapping across layers and fix NR RRC MeasurementReport
encoding failures due to out-of-range values by reusing the validated mapping.
Note NR_RSRP-Range.c constraint:
{ APC_CONSTRAINED, 7, 7, 0, 127 } /* (0..127) */
Remove NR L2 simulator code from UE
This MR removes NR (SA and NSA) L2 simulator from the codebase. The code, at
least at the UE side, was done at a time where there was no clear L2/L1 split
leading to a complex implementation that never worked as expected. The L2
simulator has been broken and removed from testing for long time and, once it
needs to be revived, it would require a complete new implementation.
Assign antenna ports correctly for 1 and 2 layers for aerial.
With this change aerial successfully decodes PUSCH with 2 UL layers.
The code should use sched_pusch->dmrs.num_dmrs_cdm_grps_no_data == 1 rather
than NFAPI_MODE != NFAPI_MODE_AERIAL, but that will make the changes a bit
more extensive.
Prior to this change, sending antenna_ports.val = 2 with rank 2 would tell
the UE to transmit on DMRS ports 2,3 rather than 0,1 causing it to not decode.
Optimization of PDSCH precoding operation
x86/aarch64 optimizations for precoding, more complete timing reporting in
nr_dlsim. Timing report in nr_dlsim now shows the total PDSCH generation time
and is broken down into Layer mapping, resource mapping and precoding.
The optimizations for x86 are basically reorganizing loops (for AVX512,AVX2,
NEON but not SSE2) to minimize repetitive instructions when formatting of the
precoder weights, and creation of inline functions for complex multiply-add.
AVX512 optimization was added. requiring AVX512BW. Detection of up to 4 PRBs
with common PMI for efficiency with AVX512 (was 2 in develop for AVX2).
For aarch64, native coding of the precoder to avoid inefficient SIMDe
translations for this operation.
nr_dlsim now uses default precoding indices depending on the scenario instead
of 0 which doesn't do precoding at all.
See merge request description for nr_dlsim test results.
Fixes to prevent assertion due to 0 PRB allocation
Assertion (NPRB>0 && (NPRB + RBstart <= BWPsize)) failed!
In PRBalloc_to_locationandbandwidth0() /home/user/openairinterface5g/common/utils/nr/nr_common.c:506
Illegal NPRB/RBstart Configuration (0,51) for BWPsize 51
Probably caused by missing safeguards to prevent computing TBS with 0 PRB
as input.
Make all targets compile
This MR enables us to compile all targets, and does that in one CI test. This
closes#726. Now, this should work:
cd ~/openairinterface5g
mkdir build && cd build
cmake .. -GNinja && ninja
To achieve this, I did the following:
- some targets have been fixed (warnings, errors)
- some targets have been removed when they did not seem to serve a good purpose
(e.g., an almost empty test)
- some targets have been commented (e.g., LTE simulators, some unitary tests)
which we maybe want to revive in the future
- some targets built when just building with ninja, but not all. For instance,
telnetsrv_enb would typically build, but it was missing a dependency. Doing
cmake .. -GNinja && ninja telnetsrv_enb would show this (in develop)
To help with the last bullet point, there is a script compile_targets.sh that
can compile targets independently (and in parallel, to not wait for ages) to
show that targets compile properly compile-targets.patch.
In almost all cases, the problem is that a specific module uses the logging
module, which depends on T, which needs to dynamically create headers. The way
to do this is to have a dependency, and many targets use generate_T or {T_LIB}
({} intentional: T might be absent, so then it evaluates to nothing). However,
not all do this, and those that depend on T actually don't depend on T, but on
the logging module, which in turn depends on T. So in many places, a simple
dependency onto log_headers fixes this problem, and generate_T or {T_LIB}
simplifies the dependency (but not always). The commits should have more info.
Note that at least the targets in FlexRIC do not all compile, at least in the
configuration that we use in docker/Dockerfile.build.ubuntu. So for the latter,
we cannot build with a simple ninja, but FlexRIC seems to be the only one that
does not compile. Since FlexRIC is a separate repository, that needs to be
addressed in the corresponding repository.
- Replace inefficient 'allocate, extract, free' pattern with direct value extraction
- Remove unused functions get_gap_config_from_smtc() and get_gap_config()
- Add extract_gap_config_from_smtc() that extracts values directly without allocation
- Eliminates use-after-free risk and improves performance
- No allocation overhead, no memory leaks
- Add missing ASN_STRUCT_FREE for NR_MeasGapConfig in create_measgap_config
- Fix 48-byte measurement gap config leak in get_gap_config_from_smtc
AddressSanitizer backtrace:
Direct leak of 48 byte(s) in 1 object(s) allocated from:
/#0 0x7d32adab4a57 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
/#1 0x5751f99cbb79 in calloc_or_fail /home/guido/repo/openairinterface5g/develop/common/utils/utils.h:74
/#2 0x5751f99cbb79 in get_gap_config_from_smtc /home/guido/repo/openairinterface5g/develop/openair2/LAYER2/NR_MAC_gNB/nr_radio_config.c:4164
/#3 0x5751f99cbb79 in create_measgap_config /home/guido/repo/openairinterface5g/develop/openair2/LAYER2/NR_MAC_gNB/nr_radio_config.c:4310
/#4 0x5751f9964abe in ue_context_setup_request /home/guido/repo/openairinterface5g/develop/openair2/LAYER2/NR_MAC_gNB/mac_rrc_dl_handler.c:709
/#5 0x5751f979e568 in nr_initiate_handover /home/guido/repo/openairinterface5g/develop/openair2/RRC/NR/rrc_gNB_mobility.c:218
/#6 0x5751f97a637f in nr_rrc_trigger_n2_ho_target /home/guido/repo/openairinterface5g/develop/openair2/RRC/NR/rrc_gNB_mobility.c:526
/#7 0x5751f9703608 in rrc_gNB_process_e1_bearer_context_setup_resp /home/guido/repo/openairinterface5g/develop/openair2/RRC/NR/rrc_gNB.c:2641
/#8 0x5751f9706b7b in rrc_gnb_task /home/guido/repo/openairinterface5g/develop/openair2/RRC/NR/rrc_gNB.c:3020
/#9 0x7d32ac494ac2 in start_thread nptl/pthread_create.c:442
Root cause: create_measgap_config allocated NR_MeasGapConfig via get_gap_config_from_smtc()
but never freed it after extracting the needed values to populate the measgap_config_t
return structure.
- Add missing ASN_STRUCT_FREE for NR_MeasurementTimingConfiguration in ue_context_setup_request
- Fix 64-byte MTC sequence leak in get_nr_mtc → SEQUENCE_decode_uper
AddressSanitizer backtrace:
Direct leak of 64 byte(s) in 1 object(s) allocated from:
/#0 0x7dcfcb8b4a57 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
/#1 0x591fcc59b67d in SEQUENCE_decode_uper /home/guido/repo/openairinterface5g/develop/cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:37
/#2 0x591fcc57eaa1 in uper_decode /home/guido/repo/openairinterface5g/develop/openair2/RRC/LTE/MESSAGES/uper_decoder.c:83
/#3 0x591fcbdbedeb in get_nr_mtc /home/guido/repo/openairinterface5g/develop/openair2/LAYER2/NR_MAC_gNB/nr_radio_config.c:4216
/#4 0x591fcbd58188 in ue_context_setup_request /home/guido/repo/openairinterface5g/develop/openair2/LAYER2/NR_MAC_gNB/mac_rrc_dl_handler.c:635
/#5 0x591fcbb92568 in nr_initiate_handover /home/guido/repo/openairinterface5g/develop/openair2/RRC/NR/rrc_gNB_mobility.c:218
/#6 0x591fcbb9a37f in nr_rrc_trigger_n2_ho_target /home/guido/repo/openairinterface5g/develop/openair2/RRC/NR/rrc_gNB_mobility.c:526
/#7 0x591fcbaf7608 in rrc_gNB_process_e1_bearer_context_setup_resp /home/guido/repo/openairinterface5g/develop/openair2/RRC/NR/rrc_gNB.c:2640
/#8 0x591fcbafab7b in rrc_gnb_task /home/guido/repo/openairinterface5g/develop/openair2/RRC/NR/rrc_gNB.c:3019
/#9 0x7dcfca294ac2 in start_thread nptl/pthread_create.c:442
Root cause: ue_context_setup_request allocated NR_MeasurementTimingConfiguration via
get_nr_mtc() but never freed it after creating the measurement gap configuration.
The create_measgap_config function only reads from the structure and doesn't take
ownership, so the caller must free it.
BWP with no PRACH occasions
This MR includes fixes at gNB and UE in case the current BWP has no PRACH
occasions, i.e. we need to switch to initial BWP.
These libraries depend on the logging module, so add the right
dependency log_headers. Indirectly, this will fulfill the condition of
T. I consider the prior usage of generate_T or {T_LIB} incorrect,
because basically none of these libraries actually, actively use T, but
rather only the logging module, which pulls in T. The dependency of
log_headers will also take care of generating and including T headers,
which is a dependency of the logging module.
For conf2uedata and related, fulfill the dependency
through conf2uedata_lib (on which the rest depends).
NR UE: in nr_ue_scheduler.c set LCID_buffer_remain to 0 if RLC indicates not
more bytes in buffer
If the RLC indicates that there is no more data in the buffer, also the
scheduler's LCID_buffer_remain should be set to 0. Else the UE sends BSR
indicating it has data to be transmitted. The gNB would then unnecessarily
schedule UL for this UE, which would not be used, as there is no actual data
to be transmitted.
If the RLC indicates that there is no more data in the buffer, also the scheduler's
LCID_buffer_remain should be set to 0. Else the UE sends BSR indicating it has data
to be transmitted. The gNB would then unnecessarily schedule UL for this UE, which
would not be used, as there is no actual data to be transmitted.
Correctly handle unpacking of the first RSRP report and its resource ID before processing additional reports.
Use the initial RSRP value as the reference for differential RSRP calculations in subsequent reports.
Robert Schmidt