Assign NR_sched_pdsch to sched_ctrl->sched_pdsch in one place, where the
post-processing functionality will be called in a follow-up commit. This
should result in no functional change.
It seems to be assumed that curInfo actually has the currently active
number of layers/PMI. However, I am not sure this would always be true
(e.g., UE might not have been scheduled for some slots, but number of
layers decreased as reported by CSI). Instead, recalculate the info
from scratch when necessary.
PF uses MCS and average throughput to decide which UE to schedule. Thus,
the first loop decides on MCS, whereas the second does the "main UE
allocation" after sorting by the PF metric.
A follow-up commit will remove sched_pusch from NR_UE_sched_ctrl_t.
Thus, we cannot rely on sched_ctrl to store the MCS in the first loop,
and look it up from there in the second. Instead, store it as part of
the UE iterator data, and take it from there.
See also: f3068caa37 ("Store selected MCS in UE iterator", for UL)
Introduce a struct with information on FAPI structures to save resource
and data allocation into. It's in nr_mac_gNB.h because the next commits
will reuse this for all preprocessors.
Especially in pf_dl()/pf_ul(), we use a first loop using
UE_iterator(), then iterate over a subset of UEs. It has happened a
couple of times that I was using variable "UE" (from the iterator), when
it should only be used in the first UE_iterator() loop.
Rewrite UE_iterator() to effectively limit the scope of the iterator
variables to the body of the UE_iterator. This should also make it
possible to reuse multiple UE_iterator()s with the same variables in
sequence.
CI: ensure clean iperf3 server startup
- Resolves issue with iperf3 test failure in RFSim5G multiue test
- Minor fix of iperf3 test descriptions in RFSim5G pipeline
Fix for scenario with no CSI report configured for CSI-RS
After changes in !3714 (merged), if we select to measure RSRP on SSB and not
CSI-RS (default option) and there is a single antenna port (so no MIMO report
either) we won't schedule any CSI-RS measurements for the UE. In that case
ideally we shouldn't set do_CSIRS = 1 in configuration file but still the
option is possible. So the fix is to not perform any measurements at UE on
that CSI-RS but not asserting.
Closes#1015
Duplex is assumed to be static but for NTN bands, it is not static.
TxRX Duplex is defined in section 5.4.4 of 38.101-5 (for NTN) specs v1809
n256 190 MHz, 165 to 215 MHz
n255 -101.5 MHz, -72.5 to -130.5 MHz
n254 862 - 885 MHz
The function rx_nr_prach become autonomous, it doesn't read anymore global variables
So, it can become (later) a threadpool work, that will send a message when it finishes
rx_nr_prach_ru() still use some global variables, but it is executed in sequence, inside the ru main loop, that limits the probability of race conditions
Before starting a new iperf3 server instance in CI tests, explicitly kill any existing
iperf3 processes bound to the same port. This prevents conflicts or failures caused by
leftover iperf3 servers from previous runs that did not terminate properly or on time.
The cleanup is performed using `pkill` before launching the new server.
Handle GTP receiver errors, fix memory leaks, add CU-UP test
- Fix use-after-free bugs in GTP by properly stopping the receive thread(s)
- Fix a bug from !3519 (merged): QFI 0 is a valid QFI
- Fix multiple memory leaks in CU-UP, E1, CU-UP load tester, SCTP
- Add a (conservative) functional CU-UP test that verifies that the load tester
and CU-UP work. Test only a low throughput, as it will run in parallel with
other tests.
Use the CU-UP load tester to test the functionality of the CU-UP and
its loader tester. The requirements on this load test are intentionally
low, as it will be run with other unit tests in parallel, and should
still pass.
It uses an existing configuration file for the CU-UP. The test script
runs the CU-UP, runs the load tester, stops the CU-UP, and returns the
load tester return value as test result (which will be 0=success if all
packets have been received).
Note that this strdup has been intentioally created for debugging
purposes in core files.
See also: 1ab3b8dd8e ("add version signature in core files...")
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x7f7bc7ee68a3 in calloc (/lib64/libasan.so.8+0xe68a3) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
#1 0x0000004abfa6 in calloc_or_fail /home/richie/oai/common/utils/utils.h:74
#2 0x0000004abfa6 in decode_e1ap_cuup_setup_request /home/richie/oai/openair2/E1AP/lib/e1ap_interface_management.c:219
#3 0x00000046a9f5 in e1apCUCP_handle_SETUP_REQUEST /home/richie/oai/openair2/E1AP/e1ap.c:187
#4 0x000000470b35 in e1ap_handle_message /home/richie/oai/openair2/E1AP/e1ap.c:109
#5 0x000000470b35 in e1_task_handle_sctp_data_ind /home/richie/oai/openair2/E1AP/e1ap.c:120
#6 0x00000047717b in E1AP_CUCP_task /home/richie/oai/openair2/E1AP/e1ap.c:832
#7 0x7f7bc7e28ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x7f7bc7ee68a3 in calloc (/lib64/libasan.so.8+0xe68a3) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
#1 0x0000004ac30c in calloc_or_fail /home/richie/oai/common/utils/utils.h:74
#2 0x0000004ac30c in decode_e1ap_cuup_setup_request /home/richie/oai/openair2/E1AP/lib/e1ap_interface_management.c:194
#3 0x00000046a9f5 in e1apCUCP_handle_SETUP_REQUEST /home/richie/oai/openair2/E1AP/e1ap.c:187
#4 0x000000470b35 in e1ap_handle_message /home/richie/oai/openair2/E1AP/e1ap.c:109
#5 0x000000470b35 in e1_task_handle_sctp_data_ind /home/richie/oai/openair2/E1AP/e1ap.c:120
#6 0x00000047717b in E1AP_CUCP_task /home/richie/oai/openair2/E1AP/e1ap.c:832
#7 0x7f7bc7e28ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
Direct leak of 100 byte(s) in 1 object(s) allocated from:
#0 0x7f6585ee6f2b in malloc (/lib64/libasan.so.8+0xe6f2b) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
#1 0x000000414a0d in malloc_or_fail /home/richie/oai/common/utils/utils.h:86
#2 0x0000004061c9 in main /home/richie/oai/tests/nr-cuup/nr-cuup-load-test.c:544
#3 0x7f6585211574 in __libc_start_call_main (/lib64/libc.so.6+0x3574) (BuildId: 48c4b9b1efb1df15da8e787f489128bf31893317)
#4 0x7f6585211627 in __libc_start_main@GLIBC_2.2.5 (/lib64/libc.so.6+0x3627) (BuildId: 48c4b9b1efb1df15da8e787f489128bf31893317)
#5 0x000000413034 in _start (/home/richie/oai/build/tests/nr-cuup/nr-cuup-load-test+0x413034) (BuildId: 8af0132792b03fa12ba95b5623865c9a8a5625a3)
Direct leak of 100 byte(s) in 1 object(s) allocated from:
#0 0x7f6585ee6f2b in malloc (/lib64/libasan.so.8+0xe6f2b) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
#1 0x000000414a0d in malloc_or_fail /home/richie/oai/common/utils/utils.h:86
#2 0x0000004061ff in main /home/richie/oai/tests/nr-cuup/nr-cuup-load-test.c:546
#3 0x7f6585211574 in __libc_start_call_main (/lib64/libc.so.6+0x3574) (BuildId: 48c4b9b1efb1df15da8e787f489128bf31893317)
#4 0x7f6585211627 in __libc_start_main@GLIBC_2.2.5 (/lib64/libc.so.6+0x3627) (BuildId: 48c4b9b1efb1df15da8e787f489128bf31893317)
#5 0x000000413034 in _start (/home/richie/oai/build/tests/nr-cuup/nr-cuup-load-test+0x413034) (BuildId: 8af0132792b03fa12ba95b5623865c9a8a5625a3)
Free memory including the "base pointer". Fix two places in which it was
on the stack to harmonize. The only stack variable is in reception of
new E1 messages (e1ap_handle_message()), which uses
ASN_STRUCT_FREE_CONTENTS_ONLY().
This fixes bugs similar to these logs:
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f418f4e68a3 in calloc (/lib64/libasan.so.8+0xe68a3) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
#1 0x00000049e367 in calloc_or_fail /home/richie/oai/common/utils/utils.h:74
#2 0x00000049e367 in encode_e1_bearer_context_release_command /home/richie/oai/openair2/E1AP/lib/e1ap_bearer_context_management.c:1235
#3 0x000000482951 in e1apCUCP_send_BEARER_CONTEXT_RELEASE_COMMAND /home/richie/oai/openair2/E1AP/e1ap.c:546
#4 0x000000482951 in E1AP_CUCP_task /home/richie/oai/openair2/E1AP/e1ap.c:856
#5 0x7f418f428ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f418f4e68a3 in calloc (/lib64/libasan.so.8+0xe68a3) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
#1 0x00000049380a in calloc_or_fail /home/richie/oai/common/utils/utils.h:74
#2 0x00000049380a in encode_E1_bearer_context_setup_request /home/richie/oai/openair2/E1AP/lib/e1ap_bearer_context_management.c:578
#3 0x00000047f6a2 in e1apCUCP_send_BEARER_CONTEXT_SETUP_REQUEST /home/richie/oai/openair2/E1AP/e1ap.c:378
#4 0x0000004829f8 in E1AP_CUCP_task /home/richie/oai/openair2/E1AP/e1ap.c:846
#5 0x7f418f428ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f418f4e68a3 in calloc (/lib64/libasan.so.8+0xe68a3) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
#1 0x00000046ede7 in calloc_or_fail /home/richie/oai/common/utils/utils.h:74
#2 0x00000046ede7 in encode_e1ap_cuup_setup_response /home/richie/oai/openair2/E1AP/lib/e1ap_interface_management.c:305
#3 0x00000047e412 in e1ap_send_SETUP_RESPONSE /home/richie/oai/openair2/E1AP/e1ap.c:167
#4 0x000000482a68 in E1AP_CUCP_task /home/richie/oai/openair2/E1AP/e1ap.c:836
#5 0x7f418f428ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
QFI 0 is a valid QFI: don't check for qfi <= 0, as uint8 cannot be
negative. Also, correctly use SDAP_MAP_RULE_EMPTY for a DRB ID (which
need to be larger than 0).
The gNB will stop the periodical logging of UEs in MAC Info level after
a configurable number of UEs have been printed, by default 8.
Set it to 17 in some CI tests to ensure we still get all UEs for the
time being, as the CI might depend on this.
improvements in formatting and LOGs in DMRS common functions at MAC
DMRS LOGs at MAC were misleading. This MR tried to improve them (and also
adds some formatting fix).
Robert Schmidt