CI: Add FHI7.2 phytest pipeline
This MR consists of multiple changes related to FHI7.2 setups in CI.
- remove unused fhi72 configurations in CI
- introduce dpdk-init service in fhi72 deployments to setup sriov on the machine
- update phytest fhi72 configurations for running on bulbul
- add phytest fhi72 to RAN-SA-FHI72-CN5G pipeline
Set rxgain to 0 in vrtsim
Set rxgain to 0 in vrtsim to match rfsimulator behavior
This addresses the issue where RSRP is different between rfsim and vrtsim. With
this RSRP values between rfsim and vrtsim should be similar.
[FHI72] Fix long PRACH format
The problem was that xran_is_prach_slot() compared if the current slot is the
scheduled one. However, this becomes irrelevant if long PRACH format used.
Successfully tested end-to-end the PRACH index 7 with TDD DDDDDDDSUU and Benetel
v2.0.5.
- Introduce dpdk-init service for SR-IOV initialization within the container
- Execute script to enable low-latency RT performance (restored after tests)
When running phytest with FHI7.2 in Docker, two services are deployed:
dpdk-init and oai-gnb. Previously, AnalyzeRTStatsObject selected the
first deployed service for RT stats analysis.
Allow to explicitly select the service used for RT stats analysis instead
of relying on the first deployed service.
vrtsim doc: clarify container requirements
Describe how to set up vrtsim in containers, e.g., docker, and link to an
example. Add a minor clarification for the connection descriptor as well.
UE: Derive Serving Network Name from SIB1 PLMN
This MR modifies the nrUE to use the Serving Network Name derived from data
communicated by the Serving Network instead of data stored in the UICC.
Previously, the Serving Network Name (SNN) used during authentication was
constructed from the IMSI, implicitly assuming the UE was attached to its
home network. In roaming scenarios, this produced an incorrect SNN, causing
authentication and key derivation failures.
Changes:
- Extract the MCC and MNC from the SIB1 PLMN identity communicated by the
serving network.
- Store these values in the UE NAS context in order to propogate them from
RCC to NAS.
- The NAS key derivation functions (transferRES, derive_kausf, derive_kseaf)
now build the SNN based on the MCC/MNC broadcast in SIB1.
Extract MCC and MNC from the SIB1 PLMN identity and store them in the
UE NAS context to propogate them to NAS security procedures.
Previously, the Serving Network Name (SNN) used during authentication
was constructed from the IMSI, implicitly assuming the UE was attached
to its home network. In roaming scenarios, this produced an incorrect
SNN, causing authentication and key derivation failures.
The NAS key derivation functions (transferRES, derive_kausf, derive_kseaf)
now build the SNN using the MCC/MNC broadcast by the serving network in SIB1,
ensuring that authentication uses the correct serving PLMN during roaming.
T: minor: remove target record_db from automatic building
We don't install clickhouse by default, so simply running make inside
common/utils/T/ would fail. Remove record_db to not build automatically.
Fix for NTN phy-test mode
- Corrected the initialisation of ntn params changed flag. Before this change on
UE, Phy-test was not running in NTN mode.
- Removed the assert wrt slot > 64 to run FR2-NTN in phy-test
- SIB2, 19 required only in SA mode like SIB1
- Introduced new method to schedule a slot in UL/DL in Phy-test mode. Dmod/ Umod
option in the command line with a value.
- This ensures that the slot n (in slots per frame) will be scheduled if
n % value == 0
- For ex: --Dmod 1 means every slot will be scheduled
- --Dmod 2 means every 2nd slot will be scheduled, like 0,2,4,6 until the
slots per frame 1.
- this can be used for testing FDD FR2 where slots go beyond 64 which is a
limitation of -D/-U option.
[FHI72] [xran F] Revert and simplify the code for Liteon FR2 interoperability
The MR !3668 introduced a lot of unnecessary changes. This MR removes useless
code in both OAI and xran F release library.
1. Remove modifications done in the following xran functions:
process_mbuf_batch();
xran_process_srs_sym().
=> not even used with OAI 7.2 interface.
2. Also, remove xran_fs_get_num_dl_sym_sp() and xran_fs_get_num_ul_sym_sp() introduced in the same MR.
3. Remove LiteOnIgnoreUPSectionIdEnable parameter. Instead, use RunSlotPrbMapBySymbolEnable in a simple way
for xran_process_rx_sym() function.
Explanation: The xran expects UL UP packets with the same section IDs as indicated per UL CP message.
However, the section IDs of received packets are 3 for mixed slot and 13 for UL slot.
If the PRACH offset is set explicitely via config file, then its value will be used.
Otherwise, eAxC_offset = max(Nrx,Ntx).
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Better c style pss sss
there is a commit to simplify code for pss and sss detection
then a second commit to test a idea: detect SSS with a advantage for SSS
in phase with PSS
Only static long PRACH configuration verified, i.e. PRACH C-plane
is ignored by the RU.
Note: Introducing `N_ZC` and `num_prbu` parameters is needed for testing
with xran F release. However, in the K release, this information is
stored in xran_rx_packet_ctl struct.
Move PRACH slot checking from oaioran.c to oran_isolate.c because
xran_is_prach_slot() compared the current slot instead of the scheduled.
The current and the scheduled slot are the same in case of short format,
but different in case of format 0. Therefore, with this commit, in xran_is_prach_slot()
we check the `prach_id->slot` and not `slot`.
the code use a precomputed table of rotations: 16 steaps between -PI/3 and +PI/3
This commit replaces the precomputed table by in code computation.
This version improves code understanding, while it won't make any significant difference
Notably, remove asn_codecs_prim_xer.h from the list of files, triggering
problems when re-running ninja, because the "canonical OAI asn1c"
(https://github.com/mouse07410/asn1c, commit ID
940dd5fa9f3917913fd487b13dfddfacd0ded06e) does not generate it:
ninja explain: output openair2/XNAP/MESSAGES/asn_codecs_prim_xer.h doesn't exist
In this version, a couple of files are not generated, so remove them
from the list.
Also, leave the files in the order as shown by ls.
Integration `2026.w11`
* !3864 remove xran_fh_tx_send_slot_BySymbol() and xran_fh_rx_read_slot_BySymbol()
* !3967 Harmonize the use of definition for number of symbols per slot
* !3971 Limit dl_DataToUL_ACK values to 15 as per standard
* !3414 Added NTN-FR2 FDD bands defined in release 18 in Ka-band range
* !3919 Reduce number of mutex locking in MAC->RLC direction
* !3923 XNAP: Add encode/decode and unit tests for Xn Setup Request/Response/Failure
* !3965 Enable BladeRF support in gNB Docker image
* !3904 add multi-ue support to vrtsim
* !3980 SDR reordering: correct warning, and USRP: return samples written
* !3834 Use flat buffer for txdataF in gNB L1
* !3981 Bugfix: make longer telnet cmdfunc names
* Reduce timing reference value for feptx_total in 40 MHz phytest
See merge request oai/openairinterface5g!3976
--Dmod option/--Umod option,
for example --Dmod 1 will schedule every slot in slots per frame
--Dmod 3 will schedule every 3rd slot. You can use --Dmod option togethor with -D option
same for uplink scheduling too.
for FR2 with 120Khz scs, there are 80 slots. Removed the assert such that FR2 config
can be tested in phy-test, currently bitmap works only until 64 slots.
Bugfix: make longer telnet cmdfunc names
The maximum number of cmdfunc names is 20, which IMO is too low. Worse, if it's
longer, nothing will warn us because C will just fill the array to it's end
(without \0 at the end). To remedy this:
- Allow longer names till 64 bytes (I hit the previous limit of 20)
- Check that the name is within the length limit: if somebody wants a very long
name, the strnlen() will return the maximum length, hitting that assertion.
- When reading a command during runtime, allow the corresponding maximum length.
On that occasion, also increase total number of permitted cmdfuncs.
Use flat buffer for txdataF in gNB L1
This MR changes txdataF buffer format to hold freq domain data starting from
PRB0 instead of circular buffer that starts from PRB N/2. The motive is to
simplify RE mapping function in L1 and copying data to xran lib.
- Add num_ues and ue_id parameters for server and client configuration
- Implement ul combining and dl distribution to all ues
- Each ue uses dedicated antenna offsets based on ue_id
- Works with no-chanmod mode only and with uniform antenna dimensions across all ues
The maximum number of cmdfunc names is 20, which IMO is too low. Worse,
if it's longer, nothing will warn us because C will just fill the array
to it's end (without \0 at the end). To remedy this:
- Allow longer names till 64 bytes (I hit the previous limit of 20)
- Check that the name is within the length limit: if somebody wants a
very long name, the strnlen() will return the maximum length, hitting
that assertion.
- When reading a command during runtime, allow the corresponding maximum
length.
On that occasion, also increase total number of permitted cmdfuncs.
The original error was simply "failed to write to RF", which is not very
precise. Update with sample numbers for context, and add it in another
similar case for consistency.
Co-authored-by: Sagar Arora <sagar.arora@openairinterface.org>
At least writerProcessWaitingQueue() checks for the exact number of
samples written. In many other places, we check that the return is
non-zero.
The usrp-tx-write-thread functionality returned 0, which triggers
various problems. Return the number of samples, as in the "direct write"
case (if-block before else-block).
Co-authored-by: Sagar Arora <sagar.arora@openairinterface.org>
Jaroslava Fiedlerova