Use the correct function in order to close open RFsim connections,
instead of a simple close(). If this is not done correctly, it might
happen that the softmodem closes, but an L1 thread might still read
samples (bug in higher layers). Then, RFsim tries to read a socket
(because it has an open connection), but the actual connection had been
close()d. This commit fixes this behavior.
Integration: `2024.w11`
See merge request oai/openairinterface5g!2623
* !2435 Add a sequence container in OAI
* !2552 NR UE RRC re-establishment
* !2611 RRC: ignore random value during RRC Setup Request
* !2587 NR UE RRC handle MeasConfig
* !2616 NR UE remove unused phy_config_ind queue
* !2580 Improve function that map ro to ssb in the UE: make dynamic smaller memory...
* !2614 F1AP: move GTP from enc/dec to logic handlers
* !2622 gNB LOG with UE command line parameters
* !2595 remove 5G dependency on 4G mac.h include, separate RA state enums between 4G/5G and UE/gNB
* !2615 Enhancements to traffic flow in SW architecture documentation
The F1AP message encoders and decoders should do only that, encoding and
decoding messages. For the actual logic handling, including set up and
teardown of bearers, we should use the handlers.
In this commit, delete GTP tunnel handling from encoders/decoders. For
the CU, this happens already in the CU-UP/E1 handlers in
cucp_cuup_handler.c. For the DU, add it in the handlers in
mac_rrc_dl_handler.c.
Integration: `2024.w10`
See merge request oai/openairinterface5g!2608
* !2427 Scan build: Result of operation is garbage or undefined
* !2477 cleanup of nfapi_nr_interface.h and more
* !2523 CI: AW2S pipeline - test with 16 UEs including RAN code fixes
* !2530 Rework of MAC UE handling of DAI
* !2583 Small-bug-from- cdb18d38bfa6aee288a68d9e8881615a48addd83-and-one-gcc-warning
* !2592 NR DMRS RX comments
* !2599 Log module small cleaning
* CI: mark as failed if UE log analysis fails
* !2465 NVIDIA Aerial Integration
* !2409 Ue rework keep sync in frame
* !2603 tx_timestamp computation doesnt count slots from rx timestamp, and a small...
* !2607 preventing negative RX absolute slot in NR softmodem
* !2606 Instructions on how to debug using container images and core dump of CI
* !2609 Upgrade Open Cells Project UICC/SIM programming tool and rename FR2 SA configuration file
* fixup after merge of Aerial
nr_fill_indication() fills CRC and RX requests, to be sent from L1 to
L2. Before this commit, nr_fill_indication() is called when
- we finally decoded LDPC (or not)
- low signal on PUSCH
This might happen at the same time, i.e., nr_fill_indication() might try
to fill both CRC and RX, in the same list, from different threads. This
can lead to this assertion:
Assertion (crc->rnti == rx->rnti) failed!
In handle_nr_ulsch() ../../../openair2/NR_PHY_INTERFACE/NR_IF_Module.c:190
mis-match between CRC RNTI e071 and RX RNTI 5e3b
e.g., e071 is low energy, and while 5e3b related message are filled in
one thread, e071 is being put into the message structure as well.
At least that is my understanding. I could not actually reproduce this
assertion; to be seen if it still happens.
Do not assert if the list of phy statistics is full; instead return
NULL.
In most places, this is handled appropriately (we do not store anything
if we can't). In nr_decode_pucch0(), the return value of get_phy_stats()
is used a little bit all over the function, and a constant
if (uci_stats)
uci_stats->variable++;
would look ugly, so make uci_stats point to the stack if we cannot store
in the phy_stats.
the uci_stats variable (pointing to per-UE statistics for UCI) is used
in function nr_decode_pucch0() to store information which is important
beyond statistics, e.g., uci_stats->pucch0_thres as a threshold (which
comes from somewhere else)
This commit refactors to use original or intermediate variables to not
mix uci_stats usage with actual processing.
Also, group uci_stats a bit more.
They use 4G NUMBER_OF_UE_MAX, which is not supposed to be present in 5G.
Further, the mutex and variable are global state; for Paging, we should
use F1.
We can only support up to 30 UEs for SRS. In this commit, we change:
- if the total number of UEs is > 32, throw error during compilation to
raise awareness (32 so that a multiple of two still works, everything
else is confusing, see also next point)
- during runtime, handle gracefully if UID is 30 or 31 to not abort (we
can simply not allocate SRS resources)
Also, refactor config_srs() to always give back new memory; the code is
shorter and clearer. Rename to get_contig_srs() to make it explicit.
Set ulimit of core to -1 enable core dumps for file-based core dumping.
Note that it is not necessary for e.g., systemd-coredumpd, but put it
for completeness.
- Return code says if copying succeeded
- Improve handling of the recursive code paths, which copy files or
directories recursively into another directory
- both for RemoteCmd/LocalCmd
Some CI users (OAI developers) expressed that the warning of the `docker
volume prune` before starting RFsim is confusing. To avoid the warning in
the HTML, force the removal; if the volume does not exist, no warning is
emitted.
To still catch possible problems, do not do this in the `terminate.xml`
so we might still see if there are other problems.
The original UL max MCS of 9 was chosen for performance reasons. In the
meantime, machines became faster, and the ULSCH decoding faster. Improve
UL max MCS to be 28 by default to use the complete range of possible
MCS.
Doing only 5 LDPC iterations by default leads to a poor reception
performance, and correspondingly many retransmissions. Increase to 8 as
the new default to improve user experience.
Ensure that the UE has an IP address before continuing the test.
Otherwise, it might happen we ping before the UE is connected.
Do not do this in do-ra and phytest, as they use --noS1, which implies
statically assigned IP address, so IP address check always succeeds(!).
Make RFsim start up faster by starting core and RAN start at the same
time. This speeds up because we do not wait for "healthy" containers
serially, but parallely.
For the RAN, it is safe to start gNB and UE at the same time in SA mode
(as the UE will only attach once the radio, and hence the full gNB, is
ready).
We do not start in parallel in do-ra and phytest, as in these modes the
gNB first has to write a UE-specific configuration file. If we start
both gNB and UE at the same time, the UE might try to read the file
before it is written, leading to a failure.
The previous code removed the "secondary UE" data (about DU association,
DU UE ID, associated CU UP), and only filled the F1-related data. In
other words, the associated CU-UP was lost. This commit reworks this
piece of code to retrieve old data, and update the relevant data without
destroying other.
CI: Integration Branch 2024 week 08
See merge request oai/openairinterface5g!2585
* !2540 NR UE max MIMO layers from UEcap
* !2554 NR UE RRC minor improvements
* !2563 Add missing backtick for proper code style in README.md
* !2567 Avoid integer overflows, buffer overflows, in channel levelling
* !2574 NR UE fix for configuring coreset0 and SS0
* !2575 NR UE fix init PDCP phy-test
* !2551 NR UE improvements for contention resolution timer
* !2570 CI: Replace nrmodule2 by up2
Integration: 2024.w06
Closes#733 and #732
See merge request oai/openairinterface5g!2564
* !2490 reworking configuration of LogicalChannelConfig at MAC UE
* !2548 NR UE MSG3 buffer
* !2556 Support RC SM aperiodic subscription for "UE RRC State Change"
* !2557 fix duplicate call of RCconfig_NR_L1
* !2550 use pointer to structure instead of module_id inside MAC
* address #733
* !2560 chore(ci): force rebuild of ran-base for integration branches
* !2495 Sidelink configuration passed from RRC->MAC
* !2220 L1 tx thread
* !2559 FH 7.2 improvements
* !2566 Provide right E1 instance when creating E2 agent in CU-UP
* !2513 Update NR SA tutorials
CUuniqInstance is also used for GTP module identification, which
uses the UDP server socket as its ID. This leads to arbitrary IDs (>0),
which is wrong.
Robert Schmidt