* this commit is making explicit the mandatory IE cn_support
in the E1 Setup Request message
* also, init cn_support in E1 Setup Request initial message preparation
* E1 CU-CP Setup Request is an E1 Interface Management message
whose type defition was missing, and it is introduced in this commit
(see 9.2.1.7 of 3GPP TS 38.463)
LDPC coding was yet not properly stopped by using free_nrLDPC_coding_interface in gNB and UE.
This was not causing major issue until now. It was especially not causing any issue with T2 LDPC coding using the PF.
But using T2 VFs, if the coding library is not properly stopped then the VF cannot be used anymore unless the admin app is restarted.
So this MR adds the missing free_nrLDPC_coding_interface.
The offset provided for each code block in the HARQ combined input and output buffer shall not be above 512.
A modulus was performed on the offset of the TB in the buffer to avoid this situation.
But the offset of the code block was added afterward so that the total offset was sometimes going above 512.
This commit performs the modulus after adding the code block offset.
- extend get_xran_prb_map() function to handle mixed slot
- properly fill PRB configuration based on DL/UL direction and duplex mode
- do not implicitly assume TDD
Modify xu_add_f1_ue_data() to be xu_addmod_f1_ue_data(), i.e., "addmod"
behavior in which it is possible to also update f1_ue_data. I do it this
way since an xu_updade_f1_ue_data() function would be almost the same as
the add function (only deleting existing data, whereas the original
add() was asserting in that case).
Modify tests to test for this behavior.
This fixes a concurrency bug. For instance, during reestablishment, the
CU needs to update the DU UE ID under which the UE is identified in the
DU. Previously, the CU would remove, then add the DU UE ID info.
At the same time, the PDCP thread might look up the information. This
can lead to asserts. Use the above addmod functionality to do the
remove-add under a mutex.
- the parameters used in DL/UL are exactly the same, except the direction and the number of PRBs;
therefore, passing the direction seems convenient for visibility purposes and reduces the code.
Note: Number of PRBs we store in fh_config for both DL/UL is num_rb_dl of openair0_config struct.
At the end, it is actually the same info.
Following SIB19 MR !3019, the phy-test mode is no longer working
In this MR we update the handling NTN-Config from ServingCellConfigCommon
to be the same as when NTN-Config is received in SIB19
Integration: `2025.w03`
See merge request oai/openairinterface5g!3206
* !3167 remove calls to clear SIMD registers, that was a historical issue
* !3179 UE statistics improvements
* !3193 Remove spinlock from threadpool task return
* !3195 UE MAC: in phy-test/do-ra, fill TB randomly
* !3201 T tracer: minor fixes for compilation
* !3204 CI: Increase number of test trials for timing tests
* !3034 Delay compensation for PUCCH2
* !3205 Fix calculation of RSSI in pucch_rx.c
Fix calculation of RSSI in pucch_rx.c
Fix two issues with RSSI calculation in PUCCH:
- RSSI was calculated using partial sum instead of average of squared samples.
- There was a missing parentheses pair which causes the RSSI value to underflow.
The proper way to calculate power in dBFS is
let signal_energy = average of squared samples of received signal over resource elements, antennas and symbols under measurement
then:
rssi[dBFS] = -10log10(max_sample^2 / signal_energy),
or (to avoid division):
rssi[dBFS] = -(10log10(max_sample^2) - 10log10(signal_energy))
CI: Increase number of test trials for timing tests
- Increasing a number of test trials aims to reduce variations and
improve reliability of the nr_ulsim and nr_dlsim test results.
- Disable CPU sleep states on the machine when running physims.
- Minor adjustment of timing threshold in 60 MHz phytest.
Delay compensation for PUCCH2
- Implementation of delay compensation for PUCCH2, which minimizes for
exampe logs "reported RSRP index XXX invalid"
- Adding a test to the CI to perform the delay compensation in PUCCH2
- Refactor code to use c16_t data type in PUCCH decoder
Remove spinlock from threadpool task return
The idea to use atomic aligned to cache line for counting finished jobs
is reused, but instead of polling a semaphore was added.
remove calls to clear SIMD registers, that was a historical issue
This works because gcc/clang replaces the MMX calls by SSE2 automatically.
There are some mm_empty() calls in bad places (places where we don't use
_m64) and it is lacking in places where we still use _m64. Given that
MMX calls are converted to SSE2, there is no problem, and we will remove
remaining _m64 variables.
Fix two issues with RSSI calculation in PUCCH:
- RSSI was calculated using partial sum instead of average of squared samples.
- There was a missing parentheses pair which causes the RSSI value to underflow.
The proper way to calculate power in dBFS is
let signal_energy = average of squared samples of received signal over resource
elements, antennas and symbols under measurement
then:
rssi[dBFS] = -10log10(max_sample^2 / signal_energy),
or (to avoid division):
rssi[dBFS] = -(10log10(max_sample^2) - 10log10(signal_energy))
* this function is used by both CU-CP and CU-UP
* it behaves differently depending on the type of E1 instance:
CU-CP: inform RRC of E1 connection loss with CU-UP
CU-UP: trigger a new SCTP association request by sending an ITTI to the CU-UP task
* after receiving the E1AP register request, the CU-UP will send a new association request to
SCTP until new E1 connection is achieved by sending a TIMER_HAS_EXPIRED message to the CU-UP
task. The function e1apHandleTimer() is basically triggering a new E1 association request
until new E1 connection is achieved
* print SCTP association state in e1ap.c whenever needed
Related to #878
* add function to check whether cu-up is connected
* add functions to send the relevant response messages with the failed list
e.g. to fill PDU Session Resource Failed to Setup items
* set return value of trigger_bearer_setup to bool and handle the
failure by sending setup response messages with list of PDU sessions failed to setup
i.e. send failed list of items when no CU-UP is associated to the CU-CP
note: it considers all PDU Sessions as failed to setup in the considered failure scenarios
* e.g. send a list of failed PDU session resources in the response message to reject
PDU Session Resource Setup in rrc_gNB_process_NGAP_PDUSESSION_SETUP_REQ
* the Initial Context Setup has a Failure message, but for the considered failure scenario
when no CU-UP is available the current design is just sending a list of failed to setup
items in the Response message
* transfer PDU Session Resource/Initial Context Setup Request NAS PDU to UE
closes#878
* new struct definition including both NGAP cause group and value
* add encoding function, temporarily in ngap_common.c
(in the long term to be place in a enc/dec NGAP library)
* extend Radio Network cause enum values
* add cause member to Setup Failure
Guido Casati