Enhance UE identity management in Initial UE Message and other NGAP improvements
This MR improves the Initial UE Message procedures by supporting simultaneous
presence of both 5G-S-TMSI and GUAMI. Previously, only one identity could be
used, leading to potential AMF selection failures. Now the presenceMask allows
both identities. The AMF selection is prioritizing GUAMI first, then falling
back to 5G-S-TMSI, and finally using PLMN or highest capacity.
Also, fix handling of selected PLMN identity in NGAP.
Refactoring:
- Select the AMF based on (1) absence of UE Identity (2) Presence of GUAMI
(3) Presence of 5G-S-TMSI
- Also refactored the AMF selection logic for better readability and reliability.
- Refactor and cleanup rrc_gNB_send_NGAP_NAS_FIRST_REQ
- Replace ngap_pdu_t with byte_array_t
- Add guami_t to ngran_types.h: refactor NGAP and RRC code to use one common
GUAMI type instead of two identical ones
Also:
- Bugfix in ngap_gNB_handle_ng_setup_response: use correct count for PLMNSupportList
Closes issue #801
selectedPLMN-Identity IE in RRCSetupComplete is an Index (long) of the PLMN selected
by the UE from the plmn-IdentityInfoList (SIB1) (see 3GPP TS 38.331)
while
Selected PLMN Identity in NGAP INITIAL UE MESSAGE Indicates the selected PLMN
id for the non-3GPP access (PLMN Identity ID carrying MNC, MCC and MNC size,
9.2.5.1 3GPP TS 38.413)
The legacy code was setting Selected PLMN Identity in the latter to an ID
value as the former, however in NGAP the IE to be encoded is PLMN Identity 9.3.3.5
therefore:
* set plmn type plmn_id_t in ngap_nas_first_req_t
* check whether received selectedPLMN-Identity is within bounds
* select PLMN from gNB_RrcConfigurationReq by selectedPLMN-Identity ID
note: this commit is assuming that the plmn-IdentityInfoList in SIB1
is matching the PLMN list in gNB_RrcConfigurationReq
* in NGAP: store the PLMN in the NGAP UE context, no need to fetch the PLMN
in the NGAP instance since the UE context already tells what PLMN
was selected
Closes#801
* use bitmask to select presence of either 5G-S-TMSI or GUAMI
* select the AMF based on
(1) absence of UE Identity (2) Presence of GUAMI (3) Presence of 5G-S-TMSI
Related to #801
* add function to process AMF Identifier
* add function to select AMF
* set const parameters in utility nnsf functions
* adopt utilities for memory allocation
* improve readability and maintainability
* improve logging
ngap_pdu_t has the same definition as byte_array_t, so it is
replaced by the latter. This simplify the stack and reduces
duplicated code.
Also, add function create_byte_array to copy from an
existing buffer to a new byte_array_t and replaced
allocCopy with create_byte_array, and adopted
OCTET_STRING_fromBuf whenever possible.
Add CI test to force RRC IDLE and new connection setup with 5G-S-TMSI
This MR is a follow up to !2725 (merged)..
The primary goal is to introduce a CI test that enforces the following behavior:
- Forces the UE to enter RRC_IDLE state.
- Validates the UE's re-connection procedure using the 5G-S-TMSI as the UE
identity.
fix the number of preambles per SSB at UE in case PRACH is configured with groupB
To fix an issue reported in the mailing list related to UE configured by a 3rd
party gNB with groupB PRACH
* Close entity->pdusession_sock manually before pthread_join() to unblock sdap_tun_read_thread()
* Update tun_destroy() to open a fresh socket for interface management, independent from the data socket
* Fix check on success of change_interface_state() in tun_destroy(): is a boolean
* Handle ENODEV error when bringing interface down: treat as success if the interface is already gone.
* tun_destroy() is now handling INTERFACE_DOWN, so `INTERFACE_DOWN` in `tun_config()` is no longer needed
Fix PDSCH and PUSCH BWP Start and Size when PXSCH is scheduled with a DCI format x_0 in any type of PDCCH common search space
- Fix PDSCH and PUSCH BWP Start and Size when PDSCH/PUSCH is scheduled
with a DCI format x_0 in any type of PDCCH common search space
- Fix resource block assignment information (RIV field) for DCI format
x_0 when scheduling in any type of PDCCH common search space
Fix RRC resources periodicity determination according to number of slots per period
Otherwise we may end up in scenarios where some channels would end in
the wrong TDD slot type
Add enc/dec library and unit test for E1 Bearer Context Modification Failure
This MR is adding:
- the enc/dec library
- unit test
- handler and callback in stack
For the E1 Bearer Context Modification Failure.
E1 Bearer Context Release enc/dec lib and unit test
This MR is adding:
- the enc/dec library
- unit test
And adopting the lib in stack, for the E1 Bearer Context Release.
Release all SDAP entities for a UE in nr_rrc_going_to_IDLE().
With this change the SDAP entities of the UE are cleaned up
when going into RRC_IDLE, including tun sockets, threads etc.
A new SDAP entity is created when re-attaching to the network.
Move this message down, at the end of the function, if no code path
exists under which msg3 allocation might fail despite this log having
been printed.
Assume the minimum grant (min_rb) size to be the bandwidth part size. As
an example: rbStart 0, min_rb=bwpSize=106. This should pass, hence
modify these two conditions.
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Signal gNB-DU config update CellStatus from DU to CU
Add the cell status to gNB-DU configuration update message, including
test. Use the gNB-DU configuration update to signal the cell status in
the stack.
This IE was not included in a previous refactoring round, but is at
least necessary to be decoded when interoperating with the OSC O-DU.
Jaroslava Fiedlerova