1. Rename oai-flexric to nearRT-RIC. FlexRIC is a project combining nearRT-RIC, xApps, and E2 agent emulators.
2. Instead of undeploying all the containers at the same time, and not checking the logs for xApps and nearRT-RIC, do the following:
- Stop containers (docker compose stop) - one or subgroup of running containers in the following order:
a) xapp-kpm-moni
b) xapp-kpm-rc
c) xapp-gtp-mac-rlc-pdcp-moni
d) oai-nr-ue oai-nr-ue2
e) oai-gnb
f) nearRT-RIC
- Undeploy containers (docker compose down), collect and analyze all the logs.
For now, only DL/UL MAC stats.
This commit fixes the "RRU.PrbTotDl" and "RRU.PrbTotUl" measurement calculation
to align with the TS 28.552 specifications.
1. Create a free_ru_session_list() function to free the memory allocated for the connected RUs
before closing the nr-softmodem.
2. xmlReadMemory() and xmlNodeGetContent() were causing serious memory leakages,
and now all is properly freed using xmlFreeDoc() and xmlFree().
This struct is used in multiple source files.
Previously, when stopping the nr-softmodem, the ru_session_list "disappears"
and the M-plane wasn't terminated properly (num_rus = 0 even though DU connected to at least one RU).
MIMO mode is defined by setting separate carriers to different antenna ports.
Benetel v1.2.2 does not support MIMO mode to be set via M-plane, and therefore
we only created one Tx and one Rx carrier.
Benetel v1.4.1 supports MIMO mode setting via M-plane.
Therefore, this commit introduces the adaptation based on the number of supported carriers by a DUT RU.
These 3 states: "oper-state", "admin-state", "availability-state" are optional,
but shall be checked in order to activate the carriers. If an O-RU doesn't support it,
we assume the expected values:
- "oper-state" = "enabled"
- "admin-state" = "unlocked"
- "availability-state" = "NORMAL"
Implement retrieval of the hardware states if O-RU supports, i.e. Benetel release v1.4.1.
Performance Management support explanation.
Example run modified according to:
- modification of the frequency offset, frame structure, fft size, cyclic prefix, and Tx gain;
- addition of the managed delay node;
for Tx/Rx endpoints.
Introduced a parameter start_up_timing which indicates if PM activation is supported during the start-up
procedure. We initialize this parameter, based on the vendor.
Notification interval is set to 10s.
Definition in o-ran-uplane-conf.yang model:
"Gain correction of RF path linked with array element or array layers.
Common part of overall gain_correction.
gain_correction = common array-carrier gain-correction + eAxC gain correction."
Instead of running xApps from oai-flexric container,
create dedicated xApp containers.
In addition, modify the flexric.conf: DB_PATH doesn't exist;
DB_DIR is the correct name.
- prerequisites - use the links to FlexRIC tutorial
- build FlexRIC - use the build tutorial from FlexRIC tutorial
- explain in more details the supported service model functionalities
- explanation if no RIC INDICATION is being sent
- use multi-UE rfsim tutorial from doc/, not oai-workshops repository
Segmentation fault occured since the commit ID 9e5c5497ab,
where we try to copy the pointer which was not even been allocated. Before, we were
copying the address of a NULL pointer and therefore no segmentation fault.
This commit fixes the segmentation fault by checking if the memory was allocated, i.e. should not be
in the case of CU (as it doesn't contain MAC/RLC layers).
As per CUS spec, the MTU can be 1500 or 9000 B, where MTU = IQ data format.
Packet length = ethernet header + RTE_PKTMBUF_HEADROOM + MTU
However, xran assumes different definitions of the MTU:
(1) in xran_init_mbuf_pool(): MTU = ethernet header + IQ data format;
(2) in xran_get_num_prb_elm(), xran_init_PrbMap_from_cfg(), xran_init_PrbMap_from_cfg_for_rx(), xran_init_PrbMap_by_symbol_from_cfg(): MTU = complitely wrong (as the IQ data format is not well included).
Additionally, xran assumes that the max MTU 9600 B, instead of 9000 B as per spec.
Nevertheless, I left 9600 B in all config files and docs due to wrong calculation of (2) for the total number of PRBs per fragment.
1. Closes#884 - increase the XRAN_MAX_FRAGMENT from 4 to 6 (sufficient for MTU 1500 with compression 8b)
2. Add new firmware version that supports jumbo frames
3. Update the config file to align with the new Liteon unit in our lab - center frequency, jumbo frames, compression and RU MAC address,
as well as the max DL MIMO layers.
- if RU(s) are not well configured, disconnect immediately and stop the DU
- if all RUs are well configured, proceed with waiting until ready. The RU is
ready when the carriers are activated. Either the RU already has preconfigured
carriers (previous M-plane client configured), or the DU has to wait until receives
the notifications.
Ideally, we should load the yang models from the RU operational datastore, but the issues are following:
1) the yang models order is not good - dependancy models have to be loaded first
2) earlier O-RAN yang versions (e.g. v4) is not properly defined (i.e. optional parameters should not be included by default)
Added support in both cases, loading from RU with <get-schema> RPC, and loading statically from "radio/fhi_72/mplane/yang/models" folder.
- cmake version 3.12 defines libxml2 module; the default path is
/usr/share/cmake-3.<sub-version>/Modules/FindLibXml2.cmake
- OAI requires minimum cmake version 3.16
- RU IP address - to connect to RUs via netconf
- DU MAC address - for setting up the CU-planes on RU; not used in xran
- VLAN tag (*) - for setting up the CU-planes on RU; not used in xran
- DU keypair - for authentication when connecting to RU(s)
The parameters that RU-controller shall retreive from RU list of
capabilities:
- MTU
- compression
- RU MAC address
- PRACH offset (**)
(*) VLAN tag is not used in xran but an option is given in fh_config struct.
In my opinion, it is not a very suitable place, as it is needed for VFs.
Therefore, I moved it in the initialization part for M-plane purposes.
(**) PRACH offset shall be >= max(Ntx,Nrx), as per O-RAN CUS specification:
"The O-DU may decide to use same eAxC ID value to address endpoints on different O-RUs,
but eAxC ID values assigned to one O-RU must be unique within the O-RU’s endpoints of same direction."
=> however, LITEON supports flexible assignment of PRACH eAxC IDs, so
we made a workaround in the xran library to support PRACH eAxC IDs same
as PUSCH eAxC IDs.
Issue: unforeseen capability of having the same RAN Parameter ID across different
REPORT service styles.
Solution: keep only RAN Parameter IDs from REPORT styles that are supported by OAI.
Implement sequence array where each element is combination of RIC request ID (unique per RIC SUBSCRIPTION)
and Event Trigger Definition. This way we can properly check further conditions for a certain RAN Parameter ID.
(e.g. if xApp is subscribed to RRC Connected and/or other modes, for "RRC State Changed To" RAN Parameter ID)
Next steps: for new RAN Parameter ID, add new sequence array.
Co-authored-by: Bischoff <tano.bischoff@hhi.fraunhofer.de>
Co-authored-by: Shrinish Donde <shrinish.donde@hhi.fraunhofer.de>
Co-authored-by: Khanh Toan Pham <khanh.toan.pham@hhi.fraunhofer.de>
- in the Rx callback I reset the number of section descriptions/number of fragments to 0,
but for each antenna up to max number of antennas per RU, instead of up to max number of a distributed antenna array
- extend get_xran_prb_map() function to handle mixed slot
- properly fill PRB configuration based on DL/UL direction and duplex mode
- do not implicitly assume TDD
- the parameters used in DL/UL are exactly the same, except the direction and the number of PRBs;
therefore, passing the direction seems convenient for visibility purposes and reduces the code.
Note: Number of PRBs we store in fh_config for both DL/UL is num_rb_dl of openair0_config struct.
At the end, it is actually the same info.
Major improvements:
1) bbu_offload - enable packet handling on BBU cores
2) dlCpProcBurst - DL CP processing on one or more symbols
3) SRS CP processing - depends on the RU capabilities that can be
retreived via M-plane (if RU is CAT B)
4) nSecDesc - the number of section descriptors per symbol; it was hardcoded to 0 in E release;
depends on the RU capabilities that can be retreived via M-plane
5) RunSlotPrbMapBySymbolEnable - enable PRB mapping by symbol with multisection;
depends on the RU capabilities that can be retreived via M-plane
6) DSS (Dynamic Spectrum Sharing) support - depends on the RU capabilities that can be retreived via M-plane
Minor fixes in F that exist in E:
1) prach_config->nPrachFilterIdx - explained in commit ID f3045396
2) T1a_min_cp_dl - explained in the commit under title "Clarification on DU delay profile"
3) fh_config->nULRBs - explained in commit under title "Further clarification on xran E release parameters"
Removed const for prb_conf argument in oran_allocate_cplane_buffers()
function, as F release requires the not const struct for
xran_init_PrbMap_by_symbol_from_cfg() and xran_init_PrbMap_from_cfg()
even though the struct is not modified inside of these functions.
- remove xran parameter io_cfg->port logging => this parameter
is filled within xran library in both E and F releases
- PRACH offset explanation; not limited to >= max(Ntx, Nrx);
workaround done in xran to support PRACH eAxC IDs same as PUSCH eAxC IDs
- DL PRB not used in xran; UL PRB used in xran F release, therefore
removed from the patch
- these fixes should have been done in the commit ID f3045396
- identification of each parameter in fh_init and fh_config structs
- identification of unused parameters in xran library
- identification of parameters used for CAT A O-RU
=> CAT B not supported in this release
Teodora